Select the program you want to quote. You can select different programs and they will be added in the lower floating button. When you finish choosing you can go to quote them.

CATEGORIESILT CODENAMESUMMARYSELECT
, ILT-U-625Accelerated Aging determination

Accelerated Aging. According to ASTM F1980

, ILT-U-2368Accelerated exposure of components determination

Fastness to light (800 hours), Brightness / Color evaluation after test after 800 hours

ILT-U-661Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion

Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion

ILT-U-1807Aging behavior. Weathering in dry, hot climate

Description: Duration: 1600 hs Method: PV 3929

ILT-U-1808Aging behavior. Weathering resistance, humid heat

Description: Duration: 1600 hs Method: PV 3930

, ILT-U-3322Anaerobic Biodegradation of Plastic Materials determination

Description:

Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions. According to ASTM D5511


Standard :ASTM D5511,

ILT-U-1009Ash determination in PVC pipes and connections

Description: Method A Method: NBR NM 84

, ILT-U-2362Biobased content in plastic samples based on Carbon-14

Biobased content analysis based on Carbon-14

ILT-U-911Bulk density and volatile matter determinations in Polyvinyl chloride

Description: Bulk density and Volatile matter Method: ASTM D2584, ASTM D1622

, ILT-U-922Chemical determinations

Description:

Specific migration in metals: Antimony, Arsenic, Barium, Boron, Cadmium, Zinc, Copper, Chromium, Tin, Mercury, Silver and Lead. According to RDC 52 and RDC 326



Standard :[:en]Resolution RDC Nº52 [:]

ILT-U-670Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems

Description: Method: ASTM D2846

ILT-U-517Coefficients of friction

Description: Method: ASTM D1894

, ILT-U-3124Colorants determination

Description:

No visible migration, Metals and metalloids(Sb,As,Ba,Cd,Cr,Pb,Hg,Se), Unsulphonated Aromatic amines(aniline,benzidine,2-naphthylamine, 4-aminobiphenyl), Sulphonated Aromatic amines, Toluene extractives(only for carbon black), Polychlorinated biphenyls(PCB), Cadmium content. According to Council of Europe AP(89)1



Standard :Council of Europe AP(89)1

ILT-U-2231Colorants in plastic materials determination

Description: Colorants in plastic materials and articles coming into contact with food. No visible migration (for finished products); Metals and metalloids; Carbon black (only for carbon black); Inorganic cadmium pigments; Unsulphonated Aromatic amines(only for powder sample, and indicate test according to pigments or dyes ); Specific aromatic amine(Benzidine, 2-naphthylamine, 4-aminodiphenyl) and sulphonated aromatic amines; and Polychlorinated biphenyls Method: Council of Europe AP(89)1

ILT-U-3206Composite material determination

Description:

Determination of fiber, resin and voids. (Density, Weight percent of reinforcement, Weight percent of matrix, and Mass content of voids). According to ASTM D3171. Procedure B (digestion acid)



Standard :[:en]ASTM D3171[:]

ILT-U-1423Composite materials determination

Description: In-plane shear response of polymer matrix composite materials by tensile test of a +/- 45° laminate determination Method: ASTM D3518

ILT-U-2505Composite materials determination

Strength of adhesively bonded rigid plastic Lap-Shear joints in shear by tension loading. According to ASTM D3163

ILT-U-2506Composite materials determination

Measuring adhesion of organic coatings by direct tensile method. According to ASTM D5179

ILT-U-2507Composite materials determination

Textile-glass and mineral-filler content. According to ISO 1172

ILT-U-1043Compressive properties of oriented fiber-resin composites determination

Description: Compressive properties of oriented fiber-resin composites determination Method: SACMA SRM-IR-94

ILT-U-1044Compressive properties of rigid plastics determination

Description: Compressive properties of rigid plastics determination Method: ASTM D695

ILT-U-660Crush resistance in pipes and connections determination

Description: Method: ASTM D2241, ASTM D1785

ILT-U-292Density and Specific Gravity (Relative Density) of Plastics by Displacement

Description: ASTM D792 Method: ASTM D792

, ILT-U-2411Detection of an antioxidant in polyolefin

Chimassorb 944 Antioxidant Detection. According to Freitag Method

ILT-U-523Determination of 2 % Secant Modulus for Polyethylene Geomembranes

Description: Method: ASTM D5323

ILT-U-719Determination of ash content on PVC pipes and fittings

Description: Ash Method: ASTM D5630

ILT-U-1844Determination of Chloroform Soluble Extractive in Resinous and polymeric coatings use as food contacting material

Description: Simulant: Deionized Water, EtOH 8%, n-Heptane Method: 21 CFR 175.300

ILT-U-672Determination of resistance to external blows

Description: Round-the-clock method Method: ISO 3127

ILT-U-557Determination of the transition temperature of polymers by differential scanning calorimetry

Description: Method: ASTM D3418

ILT-U-254Determination of Thickness of Plastic Film Test Specimens

Description: ASTM D6988 Method: ASTM D6988

ILT-U-1457Determinations in plastic

Description: compressive test and cross cut test Method: ISO 2409, ISO 604

ILT-U-920Determining the Izod Pendulum Impact Resistance of Plastics

Description: Method: ASTM D256

ILT-U-1847Different determinations for Nylon Resins use as food contacting material

Description: Extractable Fractions in Nylon Resins (Deionized Water extractives, 95% ethanol extractives, Ethyl acetate extractives, and Benzene extractives); Specific Gravity in Nylon; Melting Point in Nylon Resins; and Solubility in Boiling HCl in Nylon Resins Method: 21 CFR 177.1500

ILT-U-1845Different determinations for Olefin polymers use as food contacting material

Description: Determination of Extractable Fraction for Olefin polymers (Hexane); Determination of Soluble Fraction for Olefin polymers (Xylene); Determination of Density for Olefin polymers; and Determination of Melting Point for Olefin polymers Method: 21 CFR 177.1520

ILT-U-1342Dimensional stability of PVC pipes

Description: Method: NBR 5687

ILT-U-1386Dimensions of Thermoplastic Pipe and Fittings

Description: Method: ASTM D2122

, ILT-U-2641Elastomeric joint sealants determination

Description:

Bond Strength. According to ASTM C794


Standard :ASTM C794,

ILT-U-1640Elemental analysis on polymeric materials by FTIR

Description: Method: ASTM E1252

ILT-U-2233Epoxy resins determination

Description: Restriction of use of certain epoxy derivatives. Overall migration in 10% ethanol (pH>4.5 aqueous foods); Overall migration in 3% acetic acid (pH?4.5 acidic foods); Overall migration in 20% ethanol (alcohol content?20% foods); Overall migration in 50% ethanol (alcohol content>20% or oil in water emulsions); Overall migration in rectified olive oil or substitute of rectified olive oil (fatty foods); Specific migration of primary aromatic amine in 3 % acetic acid; and Soluble heavy metal (Al, Ba, Co, Cu, Fe, Li, Mn, Zn,Ni) Method: Commission Regulation (EU) No 10/2011, Commission Regulation (EC) No 1895/2005

ILT-U-291Exposure to Laboratory Light Sources: Accelerated UV Ageing. PT

Description: Exposure to Laboratory Light Sources. Accelerated UV Ageing. (10 cycles of 8 hours of UVA-340 ultraviolet light at 60°C, followed by 4 hours of condensation (simulating dew) at 50°C.); and Color Determination of Plastic Pellets Method: ASTM G154, ASTM D6290

ILT-U-1764Exposure to Laboratory Light Sources: Xenon Arc Lamps

Description: Exposure to Laboratory Light Sources: Xenon Arc Lamps (300 hours); and Color Determination Method: ISO 4892-2, ASTM D6290

ILT-U-374Fiber Reinforced Plastics test

Description: ISO 527-4, ISO 527-5, ISO 14125, ISO 14126, & ISO 14130. Method: ISO 527-4, ISO 527-5, ISO 14125, ISO 14126, ISO 14130

ILT-U-666Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints

Description: Pressure test for leakproofness Method: ISO 3603

ILT-U-1914Flammability in plastics

Description: Flammability Method: UL 94

ILT-U-998Fluorescent Ultraviolet (UV) Exposure of Photodegradable plastics

Description: Exposure of Photodegradable plastics. Method: ASTM D5208

ILT-U-1915Heavy Metal content in plastics

Description: Lead, Zinc, Cadmium, Mercury, and Arsenic Method:

ILT-U-3385High-density Polyethylene determination

Description:

HDPE coating adhesion. According to DIN 30670


Standard :DIN 30670,

ILT-U-3386High-density Polyethylene determination

Description:

Crush Test. Testing of welded joints of thermoplastics semi-finished products. According to EN 12814-4 - Part 4


Standard :EN 12814-4,

ILT-U-3387High-density Polyethylene determination

Description:

Guided bending. According to DVS 2203-5, ASME BPVC IX part QF



Standard :DVS 2203-5, ASME BPVC IX part QF,

ILT-U-3388High-density Polyethylene determination

Description:

Barcol Hardness. According to ASTM D2583


Standard :ASTM D2583,

ILT-U-520Hot seal strength determination

Description: Method: ASTM F1921

ILT-U-999Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material

Description: Energy dispersive X-ray spectrometry Method: ASTM F2617

ILT-U-1063Impact Resistance of Plastic Film by the Free-Falling Dart Method. PT

Description: Impact resistance. Method: ASTM D1709

ILT-U-668Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals

Description: Method: ASTM D3212

ILT-U-673Longitudinal reversion

Description: Thermal reversion Method: ISO 2505

, ILT-U-710Materials and articles in contact with foodstuffs.

Description:

Mono & di-ethylene glycol. According to EN 13130-7


Standard :EN 13130-7,

ILT-U-921Melt Flow Rates of Thermoplastics by Extrusion Plastometer

Description: Method: ASTM D1238

, ILT-U-016Migration determination

Description: Drinking water Method:

ILT-U-2236Nylon products determination. PT

Description: Plastic materials and articles intended to come into contact with food. Overall migration in 10% ethanol (pH>4.5 aqueous foods); Overall migration in 3% acetic acid (pH?4.5 acidic foods); Overall migration in 20% ethanol (alcohol content?20% foods); Overall migration in 50% ethanol (alcohol content>20% or oil in water emulsions); Overall migration in rectified olive oil or substitute of rectified olive oil (fatty foods); Specific migration of primary aromatic amine in 3 % acetic acid; Soluble heavy metal (Al, Ba, Co, Cu, Fe, Li, Mn, Zn,Ni); and Specific migration of caprolactam in 3% acetic acid Method: Commission Regulation (EU) No 10/2011

ILT-U-515OD Test

Description: Method: ASTM D1505

ILT-U-1048Open-hole compressive strength of polymer matrix composite laminates determination

Description: Open-hole compressive strength of polymer matrix composite laminates determination Method: ASTM D6484

ILT-U-1267Open-hole testing strength of polymer matrix composite determination

Description: Open-hole testing strength of polymer matrix composite determination Method: ASTM D5799

, ILT-U-2343Pallet plastic determinations

Stacking, Forklifting, Block Compression, Racking Tests

ILT-U-158PBBS & PBDES determinations in plastic

PBBS & PBDES

, ILT-U-2341PET determinations

Melt Flow index

ILT-U-058Physicochemical Tests for Plastic pharmaceutical Containers

Description: USP <661> Method: USP 661

, ILT-U-2312Plastic -Toy compounds determination.

Description:
Standard :EN 71-11, [:en]EN 71-10[:]

ILT-U-1172Plastic chairs determinations

Description: Visual verification; Dimensional verification; Static load test; Impact resistance test; and Test for strength of hind legs Method: NBR 14776

ILT-U-1912Plastic corrosivity

Description: Weight loss in HCL 10%, Weight loss in NA OH 10%, and Weight loss in Dis.water Method:

ILT-U-420Plastic determination

Description: Weatherometry, U.V. exposure Method: ASTM G155

ILT-U-2586Plastic determination

Neutral Salt Spray test – Mass loss and relative corrosion resistance (48 hours). According to ASTM B117

ILT-U-2587Plastic determination

Description:

Tensile test. According to ISO 527-2


Standard :ISO 527-2

ILT-U-2640Plastic determination

Description:

Moisture Vapor Transfer. According to ASTM E96


Standard :ASTM E96,

, ILT-U-2648Plastic determination

Description:

Bond strength. According to ASTM F904


Standard :ASTM F904,

ILT-U-2709Plastic determination

Description:

Plastic Film thickness. According to ISO 4593


Standard :ISO 4593,

ILT-U-2725Plastic determination

Description:

Identification of plastic materials, Qualitative analysis of plastic components. According to GB/T 6040, EPA 6010C, and EPA 8270D


Standard :GB/T 6040, EPA 6010C, EPA 8270D,

ILT-U-2727Plastic determination

Description:

Identification of plastic materials, Quantitative analysis of plastic components. According to GB/T 6040, ISO 11358-1, EPA 6010C, EPA 8270D


Standard :GB/T 6040, EPA 6010C, EPA 8270D, [:en]ISO 11358-1[:],

ILT-U-2730Plastic determination

Description:

Plastic ash. According to GB/T 9345.1, GB/T 9345.2, GB/T 9345.4, GB/T 9345.5


Standard :GB/T 9345.5, GB/T 9345.4, GB/T 9345.2, GB/T 9345.1,

ILT-U-2943Plastic determination

Description:

Tensile Properties @ 50mm/min, Type 2 Specimens, (including elongation at break). According to ISO 6259-1/2


Standard :ISO 6259-2, ISO 6259-1,

ILT-U-3076Plastic determination

Description:

Ash Content. According to ISO 3451-1


Standard :ISO 3451-1

ILT-U-3125Plastic determination

Description:

Puncture/slow rate penetration resistance, flexible barrier films/laminates ASTM F1306


Standard :ASTM F1306

ILT-U-3189Plastic determination

Description:

Degree and rate of aerobic biodegradation of a test material. The test material is incubated with a compost inoculum, and the percentage of biodegradability is obtained by determining the percent conversion of organic carbon in the test material to carbon in the form of CO2 in the gas phase. According to ISO 14855, ASTM D5338



Standard :ISO 14855, ASTM D5338

ILT-U-3190Plastic determination

Description:

Ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved. According to ISO 17556, ASTM D5988.


Standard :ASTM D5988, ISO 17556

ILT-U-3283Plastic determination

Description:

Horizontal burning characteristics of cellular polymeric materials. According to ASTM D4986


Standard :ASTM D4986

ILT-U-3279Plastic determination

Description:

Specific optical density of smoke generated by solid materials. According to ASTM E662


Standard :ASTM E662

ILT-U-3290Plastic determination

Description:

Optical density by a single-chamber test. According to ISO 5659-2


Standard :ISO 5659-2,

ILT-U-3281Plastic determination.

Description:

Measuring the minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index). According to ASTM D2863


Standard :ASTM D2863

ILT-U-3280Plastic determination.

Description:

Specific optical density of smoke generated by solid materials for aerospace applications. According to ASTM F814



Standard :ASTM F814

ILT-U-3282Plastic determination.

Description:

Flammability characteristics of nonrigid solid plastics. According to ASTM D4804


Standard :ASTM D4804

ILT-U-3285Plastic determination.

Description:

Fire protection on railway vehicles - Toxicity test of materials and components Method 1. According to EN 17084


Standard :EN 17084

ILT-U-3291Plastic determination.

Description:

Horizontal burning characteristics of small specimens subjected to a small flame; Burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source. According to  ISO 9772, and ISO 9773



Standard :ISO 9772, ISO 9773,

ILT-U-3292Plastic determination.

Description:

Thickness. According to ASTM D6988, ASTM D6287



Standard :ASTM D6988, ASTM D6287,

ILT-U-2511Plastic determinations

Thickness. Length, and width tolerances. According to ASTM D6988, ASTM D2103

ILT-U-100Plastic determinations.

Overall migration in 10% ethanol, 3% acetic acid 2h / 70°C, Overall migration in substitute of rectified olive oil 2h / 70°C, Overall migration in MPPO (dry foods) 2h / 70°C, specific migration of metals 2h / 70°C, and Cadmium. Method Reg. UE 10/2011, EN1122, ISO 17294-2, EN 1186

ILT-U-2169Plastic determinations. 1A

Description: Glass transition temperature and glass transition step height; and TGA Thermogravimetry Method: ISO 11358-1, ISO 11357-2

ILT-U-1796Plastic determinations. 1B

Description: Overall Migration from plastic using MPPO as a simulant; and BISPHENOL A Method: EN 1186-13

ILT-U-1231Plastic determinations. 1C

Description: Density; Melt Flow index; Mechanical properties; Dimensions of the tubes; Resistance to internal pression; and Tear resistance Method: ISO 3126, ISO 1167, EN 388, ISO 527, ISO 1133-1, ISO 1183-1

ILT-U-2170Plastic determinations. 1D

Description: Temperature and enthalpy of melting and crystallization; and TGA Thermogravimetry Method: ISO 11358-1, ISO 11357-3

ILT-U-2173Plastic determinations. 1E

Description: Burning behavior by oxygen index (Ambient-temperature test) Method: ISO 4589-2

ILT-U-1913Plastic FTIR Spectrophotometer

Description: FTIR Spectrophotometer Method:

ILT-U-1141Plastic tensile properties

Description: plasticized PVC hose. ASTM D638 Method: ASTM D638

ILT-U-1387Plastics determination

Description:

Melt Flow Rate (MFR), and Melt Volume Rate (MVR). According to ASTM D1238,  ISO 1133



Standard :ISO 1133, ASTM D1238

ILT-U-2687Plastics determination

Description:

Measurement of antibacterial activity on plastics and other non-porous surfaces. According to EN 22196


Standard :EN 22196,

ILT-U-200Plastics Methodology for Assessing Polymer Photo-aging by FTIR

Description: 300 hrs and compare carbonyl Method: ISO 10640

ILT-U-2235Polycarbonate products determination

Description: Plastic materials and articles intended to come into contact with food. Overall migration in 10% ethanol (pH>4.5 aqueous foods); Overall migration in 3% acetic acid (pH?4.5 acidic foods); Overall migration in 20% ethanol (alcohol content?20% foods); Overall migration in 50% ethanol (alcohol content>20% or oil in water emulsions); Overall migration in rectified olive oil or substitute of rectified olive oil (fatty foods); Specific migration of primary aromatic amine in 3 % acetic acid; Soluble heavy metal (Al, Ba, Co, Cu, Fe, Li, Mn, Zn,Ni); and Specific migration of BPA in 50% ethanol Method: Commission Regulation (EU) No 10/2011

ILT-U-2419Polyethylene determination

Carbonyl index measurement. According to ISO 10640

ILT-U-2418Polyethylene determination

UVA weathering 200-300hrs. According to ASTM D5208

Carbonyl index measurement. According to ISO 10640

ILT-U-2417Polyethylene determination

UVA weathering 200-300hrs. According to ASTM G154

Tensile testing. Accroding to ASTM D882

ILT-U-2416Polyethylene determination

Xenon-arc weathering 200-300hrs. According to ISO 4892-2

Colour Measurement. According to ASTM D6290

ILT-U-2415Polyethylene determination

UVA weathering 200-300hrs. According to ISO 4892-3

Tensile testing. According to ISO 527-1, ISO 527-3

, ILT-U-2944Polyethylene determination

Description:

Type 2 and 5 Tensile strength and elongation. Before and after UV.  Ultraviolet aging UVA-340. According to ISO 527-3, ISO 4892-3



Standard :ISO 527-3, ISO 4892-3,

ILT-U-3188Polyethylene determination

Description:

Tensile. According to ISO 527-3, AS 1145.3



Standard :AS 1145.3, ISO 527-3

ILT-U-1161Polyethylene determinations

Description: Melt Flow Index (MFI); density by displacement; and density by gradient technique, Method: ASTM D1238, ASTM D792, ASTM D1505

ILT-U-2978Polymer determination

Description:

Average molecular weight. According to GPC


Standard :

ILT-U-2058Polymer determinations. 1A

Description: Limiting Oxygen Index Method: ISO 13501

ILT-U-2049Polymer determinations. 1B

Description: Tensile & Elongation Method: ISO 188, ISO 37

ILT-U-338Polymers and Phenolic resins determinations

Description: Heat and temperatures of reaction by differential scanning calorimetry, and Termogravimety (mass loss) and differential scanning calorimetry Method: ISO 11357, ISO 11358, ISO 11409

, ILT-U-392Polyoxymethylene homopolymer determination

Polyoxymethylene homopolymer. According to 21 CFR 177.2480

, ILT-U-2600Polystyrene determination

Description:

Percent residual styrene monomer. According to 21 CFR Part 177.1640


Standard :21 CFR Part 177.1640,

ILT-U-1293Polyurethane Raw Materials Determination of the Isocyanate Content of Aromatic Isocyanates

Description: Determination of the Isocyanate content of aromatic Isocyanates Method: ASTM D5155

ILT-U-2729PVC determination

Description:

PVC characterization, PVC dosing. According to ASTM D2124


Standard :ASTM D2124,

ILT-U-828PVC tubes determinations

Description: Vicat softening temperature; resistance to internal hydraulic pressure sustained for a long period pipes and fittings; Resistance to internal hydraulic pressure for a short period in pipes and fittings; Dimensions in pipes and fittings; Pipes and Fittings – Flammability of Plastic; Tightness of the joint ring of elastomeric material; and Determining the rigidity of plastic tubes Method: ASTM D2412, ASTM D3212, ASTM D635, ASTM D2122, ASTM D1598, ASTM D1599, ISO 2507-1, ISO 2507-2

ILT-U-664Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position

Description: Method: ASTM D635

ILT-U-665Resistance to impact on pipes and connections

Description: Method: ASTM D224

ILT-U-662Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings

Description: Method: ISO 1167, ASTM D1599

ILT-U-669Rigidity of plastic tubes determination

Description: Method: ASTM D2412

, , ILT-U-053RoHS2 determination

lead, cadmium, mercury, chromium and bromine by XRF spectroscopy ). RoHS2

ILT-U-2230Rubber products determination

Description: Rubber products intended to come into contact with foodstuffs. Overall migration in 10% ethanol (pH>4.5 aqueous foods); Overall migration in 3% acetic acid (pH?4.5 acidic foods); Overall migration in 20% ethanol (alcohol content?20% foods); Overall migration in rectified olive oil or substitute of rectified olive oil; Overall migration in 50% ethanol (alcohol content>20% or oil in water emulsions); Nitrosamine and Nitrosatable; and Specific migration of aromatic amine Method: Europe Council Resolution ResAP (2004)4

ILT-U-1421Short-Beam strength of polymer matrix composite materials and their laminates determination

Description: Short-Beam strength of polymer matrix composite materials and their laminates determination Method: ASTM D2344

, ILT-U-3446Small-bore connectors

Description:

Positive pressure leakage, Sub-atmospheric pressure leakage, Stress cracking, Resistance to separation from axial load, Resistance to separation from unscrewing, Resistance to overriding, Disconnection by unscrewing. According to ISO 80369-1, ISO 80369-7, ISO 80369-20









Standard :ISO 80369-1, ISO 80369-7, ISO 80369-20,

ILT-U-1849Specific Migration of PAH and formaldehyde and acetaldehyde

Description: Specific Migration of PAH (Deionized Water, or 3% Acetic Acid, or Olive Oil) and specific migration of formaldehyde and acetaldehyde (Deionized Water, and 3% Acetic Acid) Method: EN 13130-1

ILT-U-2393Tear-propagation resistance determination

Tear-propagation resistance determination ASTM D1938

ILT-U-1265Tensile properties of polymer matrix composite materials

Description: Tensile properties of polymer matrix composite materials Method: ASTM D3039

ILT-U-253Tensile Properties of Thin Plastic Sheeting

Description: ASTM D882 Method: ASTM D882

ILT-U-667Test methods for the resistance to dichloromethane at a specified temperature (DCMT)

Description: Unplasticized poly(vinyl chloride) (PVC-U) pipes. Method: EN 580

ILT-U-300Test of resistance to stress and thermal reversion in plastics

Description: Method: ASTM D638, ISO 2525

ILT-U-1314Thermal conductivity in polymers

Description: thermal conductivity Hot Disk tps 1500 Method: ISO 22007-2

ILT-U-089Thermal insulating products for building applications. 1C

Description: Determination of bending behavior Method: EN 12089

ILT-U-090Thermal insulating products for building applications. 1D

Description: Determination of compression behavior Method: EN 826

ILT-U-2936Thermoplastic pipe determination

Description:

Resistance to external blows Round the clock method. According to ISO 3127


Standard :ISO 3127,

ILT-U-2935Thermoplastics pipe determination

Description:

Pendulum impact strength by the Charpy method. (T = 23 ºC). Accoring to ISO 9854-1 and ISO 9854-2


Standard :ISO 9854-1, ISO 9854-2,

ILT-U-659Time-to-Failure of Plastic Pipe Under Constant Internal Pressure

Description: Method: ISO 1167, ASTM D1598

ILT-U-663Tubes and connections dimensions determination

Description: Method: ASTM D2122, ISO 3126

ILT-U-671Vicat softening temperature determination

Description: Method: ISO 2507-1, ISO 2507-2

ILT-U-531Water Absorption of Plastics

Description: Method: ASTM D570

ILT-U-521Water vapor transmission rate determination

Description: Method: ASTM F1249

, ILT-U-2642Waterproofing membranes determination

Description:

Hydrostatic Pressure. According to ASTM D5385


Standard :ASTM D5385,

ILT-U-514Wetting tension test

Description: Method: ASTM D2578

ILT – Interlaboratory Test
Scroll to Top
Cart
  • No products in the cart.