Select the program you want to quote. You can select different programs and they will be added in the lower floating button. When you finish choosing you can go to quote them.

CATEGORIESILT CODENAMESUMMARYSELECT
, ILT-U-2368Accelerated exposure of components determination

Fastness to light (800 hours), Brightness / Color evaluation after test after 800 hours

, ILT-U-2367Accelerated exposure of components determination

Fastness to light (800 hours), Brightness / Color evaluation after test after 800 hours

, ILT-U-2483Air filter determinations

Cabin Air Filter Efficiency and Capacity. According to ISO 11155-1

, ILT-U-2485Air filter determinations

Particle filtration (Passenger Compartment). According to DIN 71460-1

, ILT-U-2482Air filter determinations

Full life arrestance or “efficiency by weight”, capacity test for dry type automotive applications, Initial arrestance or “efficiency by weight”, for dry type automotive applications, and Full element pressure collapse test to 25″ pressure drop. According to ISO 5011

, ILT-U-2611Automobile oil determination

Description:

Antioxidant Concentration in HL Turbine Oils. According to ASTM D6810


Standard :ASTM D6810,

, ILT-U-2612Automobile oil determination

Description:

Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltametry. According to ASTM D6971


Standard :ASTM D6971,

, ILT-U-1295Automotive battery determination

Nominal Capacity test (C20)

ILT-U-1736Brake and suspension determinations

Description: Brake Testing System; Suspension Testing System; and Side slip Method: SASO 1284, GSO 971

ILT-U-2078Castors and wheels determination. 1A

Description: Castors and wheels Type U+ Type W Method: EN 15259

, ILT-U-3363Electric vehicles (EV) determination.

Description:

All determinations (electric vehicle conductive charging system). According to IEC 61851-1


Standard :IEC 61851-1,

, ILT-U-3355Electric vehicles (EV) determinations

Description:

Conductive charging of electric vehicles. According to IEC 62196-1, IEC 62196-2



Standard :IEC 62196-2, , IEC 62196-1

, ILT-U-3357Electric vehicles (EV) determinations.

Description:

Safety test and EMC, according to IEC 62752


Standard :IEC 62752,

, ILT-U-3376Electrical resistivity determiantion

Description:

All requirements for connection components, According to IEC 62561-1


Standard :IEC 62561-1,

, ILT-U-2448Fuel filter determination

Particle counter test. According to ISO 19438

, ILT-U-2449Fuel filter determination

Water separation test. According to ISO 16332

, ILT-U-2450Fuel filter determination

Collapse test. According to ISO 4020

, ILT-U-2451Fuel filter determination

Impulse test. According to ISO 4020

, ILT-U-2398Fuel filter determinations

Verification of Fabrication Integrity and First (Bubble Point). ISO 4020 clause 6.2

, ILT-U-2793Gas Oil determination

Description:

Fatty acid methyl ester content, Mono-aromatic hydrocarbon content, Di-aromatic hydrocarbon content, Polycyclic aromatic hydrocarbon content, Total aromatic hydrocarbon content, Density (at 15.0 °C), Kinematic viscosity (at 40.0 °C), Lubricity. According to EN 14078, EN 12916, EN ISO 12185, EN ISO 3104, EN 12156-1


Standard :EN 14078, EN 12916, EN ISO 12185, EN ISO 3104, EN 12156-1,

, ILT-U-2794Gas Oil determination

Description:

Solvent Yellow 124 (SY124) content. Accordign to Gravimetric method


Standard :

, ILT-U-2795Gas Oil determination

Description:

Sulfur (Range 0.800 to 1.200 %)


Standard :

, ILT-U-2797Gas Oil determination

Description:

Sulfur (Range 0.200 to 0.500 %)


Standard :

, ILT-U-2889Helmet determination

Description:

Peripheral vision, Shock absorption, Penetration and retention system. According to FMVSS 218



Standard :FMVSS 218,

, ILT-U-2397Hydraulic filter determinations

Verification of Fabrication Integrity and First (Bubble Point). ISO 2942

, ILT-U-2447Lube filter determination

Particle counter test. According to ISO 4548-12

, ILT-U-2429Lubricating oil determination

Determination of Wear Metals and Contaminants by Rotating Disc Electrode Atomic Emission Spectrometry (RDE AES). According to ASTM D6595

ILT-U-2073Passenger car tires determinations

Description: High Speed Tire Test; Bead Unseating Test; Tensile Strength and Elongation Test 500mm/min. Ambient and Post-Aging (96 hrs. @ 70C); and Temperature Resistance Test. Test load: 88% of the tire’s maximum load rating as marked on side wall. 375rpm – 575rpm to receive letter grading based on failure point Method: ISO 10191, GSO 53, SASO 2253

, ILT-U-3392Road vehicles determinations

Description:

Gravimetry, Light-optical analysis. According to ISO 16232



Standard :ISO 16232,

ILT-U-2074Truck tires determinations

Description: Endurance Test: Tire resistance to deformation, air loss, or damage under full-load and moderate speed over long distance; and Strength Test: Breaking energy require to puncture tire. Method: ISO 10454

, ILT-U-3375Vehicle electric components determination.

Description:

Vehicle electric components (Pulse 1, Pulse 2a/2b, Pulse 3a/3b and Pulse 4). According to ISO 7637-1, ISO 7637-2



Standard :ISO 7637-1, , ISO 7637-2

ILT-U-2087Vehicle engine radiator determination

Description: Leakage Test Method: GSO 135

ILT-U-1735Vehicle glass determinations

Description: Measurement of Glass Damage; and Measurement of Percentage Glass Tinting Method: SASO 1284, GSO 971, SASO 794, GSO 684

ILT-U-1741Vehicles battery determinations

Description: Method: SASO 1284, GSO 971

ILT-U-1739Vehicles light determinations

Description: Method: SASO 1284, GSO 971

ILT-U-1740Vehicles paint determinations

Description: Method: SASO 1284, GSO 971

ILT-U-1738Vehicles steering determinations

Description: Steering Lash-Travel Test Method: SASO 1284, GSO 971

ILT-U-1737Vehicles tire determinations

Description: Measurement of Tire Wear; and Measurement of Tire Damage Method: SASO 1284, GSO 971

ILT-U-1742Vehicles visual inspection

Description: Tire & Wheel Steering Lash – Travel Electrical System Ball Joint Wear Exterior Components & Sheet Metal Vehicle Glazing Sun Vision, Seats, Safety Belts & Safety Tools Mirror, Windshield Wipers & Washers Method: GSO 42, GSO 971, SASO 1284

, ILT-U-2047Wheels determination. 1A

Description: Impact test (single Hit) Method: ISO 7141

, ILT-U-2046Wheels determination. 1B

Description: Radial fatigue test (600.000 cycles) and Cornering Fatigue Test (50.000 cycles) Method: ISO 3006

ILT – Interlaboratory Test
Scroll to Top
Cart
  • No products in the cart.