English
Français
Español| Name | Summary | Categories | Buy |
|---|---|---|---|
| Analysis of carbon and sulfur by combustion | Description: Method: ASTM E1019 | Metal | |
| Analysis of concentrates of copper, lead and zinc | Description: Method: | Metal | |
| Analysis of determination grain size | Description: Aluminum sample Method: ASTM E112 | Metal | |
| Analysis of determination grain size and phase balance | Description: Duplex materials Method: ASTM E112, ASTM E562 | Metal | |
| Analysis of determination grain size in steel | Description: ASTM E112 Method: ASTM E112 | Metal | |
| Analysis of determination grain size in steel. 0,1 | Description: Using image analyzer software Method: ASTM E112 | Metal | |
| Analysis of macroetching metals | Description: Homogeneity or Not homogeneity of steel bar sample Method: ASTM E340, ASTM E381 | Metal | |
| Average grain size test on cooper | Description: ISO 2624 Method: ISO 2624 | Metal | |
| Average grain size test on steels. Open | Description: ASTM E112 Method: ASTM E112, ISO 643 | Metal | |
| Behavior in steam jet | Description: 18 days. Method A Method: PV 1503 | Metal | |
| Bend determination | Description: Bend determination Method: ASTM E290 | Metal | |
| Bend test Destructive test on welds in metallic materials | Description: Method: ISO 5173 | Metal | |
| Bend testing corrugated steel bar | Description: Method: ASTM A615 | Metal | |
| Bend testing of welds | Description: Method: AWS B4.0 | Metal | |
| Bending steel | Description: Bend. Method: ISO 7438, VDA 238-100, Nch 201 | Metal | |
| Bending test of steel | Description: ASME SECC. IX ED. 2010 Method: ASME SECC. IX | Metal | |
| Bending welded steel sample | Description: Bend Method: ASTM E190, ASTM A370, ASME BPVC Section IX | Metal | |
| Breaking load test of slings (lifting cranes) | Description: Inspection bodies Method: ASME B30.9 | Metal | |
| Cathodic disbondment determination | Description: Cathodic disbondment Method: ISO 21809-3, ASTM G8, ASTM G42 | Metal | |
| Chemical analysis of aluminum | Description: Fe; Si; Zn; V; Cr; and Na Method: | Metal | |
| Chemical analysis of copper/nickel alloys | Descripcion: | Metal | |
| Chemical analysis of ferrous alloy steel | Descripcion: | Metal | |
| Chemical analysis of metals | Description: Method: EN 14726 | Metal | |
| Chemical analysis of N, H and O | Description: Determination of Hydrogen; and Oxygen by Infrared detection. Determination of Nitrogen by Thermal conductivity. Method: | Metal | |
| Chemical Analysis of Steel | Description: Manganese determination Method: ASTM E1086, ASTM E415 | Metal | |
| Chemical Analysis of Steel samples | Description: B, V, Cu, and Sn Method: ASTM E415 | Metal | |
| Chemical Analysis of Steel samples. 0,1 | Description: Method: ASTM A751 | Metal | |
| Chemical Analysis of Steel samples. 0,2 | Description: Method: ASTM E1086, ASTM E415 | Metal | |
| Chemical Analysis of Steel samples. 0,3 | Description: Vanadium and copper. Method: | Metal | |
| Chemical Analysis of Steel samples. 0,4 | Description: ASTM E1086 and ASTM E415 Method: ASTM E415, ASTM E1019 | Metal | |
| Chemical Analysis of Steel samples. 0,5 | Description: ASTM E1086 and ASTM E415 Method: ASTM E415, ASTM E1086 | Metal | |
| Chemical analysis of Tin metal samples | Description: Arsenic, Bismuth, Cooper, Lead, Iron, Antimony, Tin Method: | Metal | |
| Chemical analysis of titanium samples | Description: Method: | Metal | |
| Chemical analysis of zinc alloys | Descripcion: | Metal | |
| Chemical composition of manganese steel | Description: Method: ASTM E2209 | Metal | |
| Coating mass determination | Description: Hot dip galvanized coatings Method: ISO 1460 | Metal | |
| Compression Testing of Metallic Materials at Room Temperature | Description: Method: ASTM E9 | Metal | |
| Conductivity Test aluminum sample | Description: EN 2004-1 and ASTM E1004-09 Method: EN 2004-1, ASTM E1004 | Metal | |
| Continuously hot-dip coated steel flat products | Description: EN 10346 Method: EN 10346 | Metal | |
| Corrosion behavior of stainless steels | Description: Method: | Metal | |
| Corrosion in salt spray determination | Description: Method: ASTM D1654, NBR 8094 | Metal | |
| Corrosion test purpose in tents | Description: NTMD 0026 A1 Method: NTMD 0026 A1 | Metal | |
| Corrosion tests in artificial atmospheres Salt spray tests | Description: Method: EN ISO 9227, ASTM B117 | Metal | |
| CTOD Crack tip opening displacement test of metallic materials | Description: BS 7448. Method: BS 7448-1 | Metal | |
| CTOD Crack tip opening displacement test of Welded samples | Description: Welded samples Method: BS 7448-2, ISO 15653 | Metal | |
| Degree of Blistering of Paints test | Description: ASTM D714 Method: ASTM D714 | Metal | |
| Degree of Rusting on Painted Steel Surfaces test | Description: Method: ASTM D610 | Metal | |
| Delta ferrite content determination | Description: Delta ferrite content in martensitic stainless steels Method: AMS 2315 | Metal | |
| Density testing on steel | Description: Method: ASTM B311, ISO 3369 | Metal | |
| Destructive tests on welds in metallic materials. Fracture tests | Description: EN 1320 and ASME IX:2010/QW182. Method: EN 1320, ASME IX / QW182, ISO 9017 | Metal | |
| Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels | Description: Method: ASTM A923 | Metal | |
| Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels. ABC | Description: Method A, B and C Method: ASTM A923 | Metal | |
| Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels. C | Description: Duplex Austenitic/Ferritic Stainless Steels (Method C) Method: ASTM A923 | Metal | |
| Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys | Description: ASTM G28 – method A. Method: ASTM G28 | Metal | |
| Determination of carbon and sulphide by combustion of induction furnace and infrared detection, and X-Ray Fluorescence. | Description: ASTM E 1019 /ASTM E 1085 Method: ASTM E1019, ASTM E1085 | Metal | |
| Determination of Coating Mass in zinc coatings on steel wire | Description: Method: EN 10244-2 | Metal | |
| Determination of depth of decarburized layer | Description: Depth of decarbuized Method: ASTM E1077 | Metal | |
| Determination of dezincification resistance of copper alloys with zinc | Description: Method: ISO 6509 | Metal | |
| Determination of dry thickness | Description: Painted sheet sample Method: ASTM D5796 | Metal | |
| Determination of Emittance of Materials Near Room Temperature | Description: Determination of Emittance of Materials Near Room. Temperature – Emissometer Model AE Method: ASTM C1371 | Metal | |
| Determination of film thickness (organic coating) | Description: 7C method Method: | Metal | |
| Determination of mass of zinc coating per unit area on galvanized pipes | Description: Strip and weigh method Method: ASTM A90 | Metal | |
| Determination of metals in metal chips concentrates | Description: metals chips concentrate (Ni, Zn, Bi, Pb) Method: | Metal | |
| Determination of metals in minerals | Description: Cu, Pb, Zn, As, Sb and Fe (Atomic Absorption) Method: | Metal | |
| Determination of non-metallic inclusions | Description: Method: DIN 50602 | Metal | |
| Determination of O, N, C, S, H by LECO analysis | Description: Determination of O, N, C, S, H by LECO analysis Method: ASTM E1447, ASTM E2371, ASTM E1409 | Metal | |
| Determination of resistance to humidity | Description: ISO 6270-2 Method: | Metal | |
| Determination of resistance to intergranular corrosion of stainless steels (Method A) | Description: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels – Corrosion test in media containing sulfuric acid (Method A) Method: EN ISO 3651-2 | Metal | |
| Determination of resistance to intergranular corrosion of stainless steels (Method B) | Description: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels – Corrosion test in media containing sulfuric acid (Method B) Method: EN ISO 3651-2 | Metal | |
| Determination of selenium concentration in selenium powder. | Description: Method: | Metal | |
| Determination of tension steel rebar | Description: ASTM A370 Method: ASTM A370 | Metal | |
| Determination of the effective depth of hardening after nitriding | Description: Clause 3. Method: DIN 50190 | Metal | |
| Determination of Tin impurities. | Description: Determinations: Sb, Pb, Bi, Cu, Fe, As, In, Co, Zn, Ni, Al, S, Cd, Ag and others Method: | Metal | |
| Determination on copper cathodes | Description: BSI Method Method: | Metal | |
| Determinations for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement | Description: ASTM A615 Method: ASTM A615 | Metal | |
| Determinations in construction steel bars | Description: Tensile properties; bend performance; and surface geometry measurement Method: BS 4449 | Metal | |
| Determining the Inclusion Content of Steel | Description: Manual method Method: ASTM E45 | Metal | |
| Determining the Inclusion Content of Steel. Open | Description: ASTM E45 Method: ASTM E45 | Metal | |
| Determining the inclusion or second-phase constituent content | Description: Determining the inclusion or second-phase constituent content by automatic image analysis Method: ASTM E1245 | Metal | |
| Determining the mass loss and relative corrosion resistance of metal samples exposed in a salt spray chamber (CASS and NSS) | Description: Mass loss and relative corrosion resistance (CASS and NSS) Method: EN ISO 9227 | Metal | |
| Determining the occurrence of fractures using the method DWTT | Description: Method: ASTM E436, EN 10274, API 5L3-1996 | Metal | |
| Determining the relative corrosion resistance of metal samples exposed in a salt spray chamber. | Description: Appendix A5. Method: ASTM G85 | Metal | |
| Determining the size | Description: Steel bar, steel U profiles, with taper flanges and carbon steel tubes welded Method: | Metal | |
| Determining Volume Fraction by Systematic Manual Point Count | Description: ASTM E562 Method: ASTM E562 | Metal | |
| Drop-Weight Test to Determine Nil-Ductility Transition Temperature | Description: Ferritic Steels Method: ASTM E208 | Metal | |
| Energy dispersive x-ray microanalysis (EDX) determination | Description: Energy dispersive x-ray microanalysis (EDX) Method: | Metal | |
| Evaluating the Microstructure of Graphite in Iron Castings | Description: ASTM A247 Method: ASTM A247 | Metal | |
| Evaluation of Field Metallographic Replicas | Description: Prepare specimens (Steel samples AISI 1010) for metallography, includes nital etch; Prepare replicas of specimens prepared for metallography, acetate film; Gold coated; and Digital micrographs of samples (100X magnification) Method: ASTM E1351 | Metal | |
| Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments | Description: Time test 120 hs Method: ASTM D1654 | Metal | |
| Evaluation of pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking. A | Description: Test duration: 96 hours Test solution: A Method: NACE TM 0284 | Metal | |
| Evaluation of pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking. C | Description: Total test pressure: 1 bar Partial pressure: 0.005 bar H2S (5 mbar) with CO2 balance Test duration: 720 hours Test solution: C Method: NACE TM 0284 | Metal | |
| Evaluation of pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking. Open | Description: Test duration: 96 hours Test solution: A Method: NACE TM 0284 | Metal | |
| Exposure to Laboratory Light Sources: Accelerated UV Ageing | Description: Exposure to Laboratory Light Sources: Accelerated UV Ageing (340 nm (UVA) method for 300 hrs) Method: ASTM G154 | Metal | |
| Failure determination by macrographic analysis | Description: Folds, fissures, pores, occlusions, exfoliations or any other defect Method: Nch 1514 | Metal | |
| Four-point bending test (Static) | Description: Four-point bending (Static): Structural Stiffens; Maximum moment; and Yield moment Method: ASTM F2193 | Metal | |
| Gold and silver determination | Description: Au and Ag (Atomic absorption) Method: | Metal | |
| Hardness test on arc welded joints | Description: Impact Method: ISO 9016 | Metal | |
| Hardness test on arc welded joints. 0,1 | Description: Method: EN ISO 9015-1 | Metal | |
| Holiday detection test | Description: Holiday detection test Method: NACE RP0188, ASTM G62 | Metal | |
| Impact resistance determination | Description: Impact resistance Method: ISO 21809-3, ASTM D2794, ASTM G14 | Metal | |
| Impact test in CHARPY type, V-notch specimens | Description: Low enery level, Srike 8mm, and Temperature 0 °c Method: ASTM E23, GOSTO 9454, ISO 148-1, GB/T 229 | Metal | |
| Impact test in CHARPY type, V-notch specimens. 0,1 | Description: Medium enery level, Srike 2mm, and Temperature 20 °c Method: ISO 148-1, ASTM E23, GB/T 229, GOSTO 9454 | Metal | |
| Impact test in CHARPY type, V-notch specimens. 0,2 | Description: High Level enery, Srike 8mm, and Temperature 20 °c Method: ISO 148-1, ASTM E23, GB/T 229, GOSTO 9454 | Metal | |
| Impact test in CHARPY type, V-notch specimens. 0,3 | Description: High Level enery, Srike 8mm, and Temperature -40 °c Method: ISO 148-1, ASTM E23, GOSTO 9454, GB/T 229 | Metal | |
| Impact test in CHARPY type, V-notch specimens. 0,4 | Description: High Level enery, Srike 8mm, and Temperature 20 °c Method: ASTM E23, ISO 148-1, EN 10045-1, GB/T 229, GOSTO 9454 | Metal | |
| Indentation resistance determination | Description: Indentation resistance Method: ISO 21809-3, ASTM G17 | Metal | |
| Jominy qualification test | Description: Jominy qualification Method: ISO 642, ASTM A255 | Metal | |
| Linear weight determination in corrugated bar | Description: Clause 11 Method: ASTM A615 | Metal | |
| Linear-Elastic Plane-Strain Fracture Toughness CTOD | Description: SENB or CT (Metallic materials specimens) Method: ASTM E1820 | Metal | |
| Linear-Elastic Plane-Strain Fracture Toughness K1c of Metallic Materials | Description: Method: ASTM E399 | Metal | |
| Linear-Elastic Plane-Strain Fracture Toughness KIc | Description: SENB or CT (Metallic materials specimens) Method: ASTM E399 | Metal | |
| Linear-Elastic Plane-Strain Fracture Toughness Kic. 0,1 | Description: SENB or CT (Metallic materials specimens) Method: ASTM E1820 | Metal | |
| Macroscopic and microscopic examination of welds | Description: Method: ISO 17639 | Metal | |
| Measurement of coating thickness | Description: Coating thickness in metallic (Microscopical method) Method: ASTM B487 | Metal | |
| Measurement of coating thickness. 0,1 | Description: Measurement of coating thickness. X-ray spectrometric methods Method: ISO 3497 | Metal | |
| Measurement of Fatigue Crack Growth Rates | Description: Method: ASTM E647 | Metal | |
| Measuring Adhesion by Tape Test | Description: Method B Cross Cut Test. Method: ASTM D3359 | Metal | |
| Measuring the corrugations by manual method | Description: Clause 7 and 8 Method: ASTM A615 | Metal | |
| Mechanical properties of fasteners | Description: Torsional test and minimum torque test Method: ISO 898-7 | Metal | |
| Mechanical properties of fasteners made of carbon steel and alloy steel | Description: Proof load test Method: ISO 898-2 | Metal | |
| Metal corrosion testing | Description: 49 CFR 173.137 and described in UN Manual of Tests & Criteria, Section 37 Method: | Metal | |
| Metal determination, 1A | Description: Immersion corrosion test Method: ASTM G31, ASTM G1 | Metal | |
| Metal determination. 1B | Description: Plastic Strain Ratio r for Sheet Metal Method: ASTM E517 | Metal | |
| Metal determination. 1C | Description: Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials Method: ASTM E646 | Metal | |
| Metal determinations | Description: chemical analysis in stainless steel sample by OES Method: ASTM E1086, ASTM E1019 | Metal | |
| Metal determinations | Description: | Metal | |
| Metal determinations | Description: | Metal | |
| Metallic and oxide coating. Measurement of coating thickness | Description: Microscopical method Method: ISO 1463 | Metal | |
| Metallic materials Bend test | Description: NMX-B-113 Method: NMX-B-113 | Metal | |
| Metallographic determination of the Delta ferrite content in austenitic Semi-finished products | Description: Fusing test Method: AVS E 63/01 A | Metal | |
| Microbeam analysis. Analysis using energy-dispersive spectrometry (SEM/EDS) | Description: Qualitative analysis. The range of elements we have is from Na to U. Method: ISO 22309 | Metal | |
| Microbeam analysis. Quantitative analysis using energy-dispersive spectrometry (SEM/EDS) | Description: Qualitative analysis. Method: ISO 22309 | Metal | |
| Microetching Metals and Alloys | Description: Method: ASTM E407 | Metal | |
| Microstructure of cast irons | Description: Graphite classification by visual analysis Method: EN ISO 945-1 | Metal | |
| Nick Break Test | Description: Method: API 1104 | Metal | |
| Nickel and chrome ore determinations | Description: Method: | Metal | |
| Nondestructive Measurement of Dry Film Thickness | Description: ASTM D7091 Method: ASTM D7091 | Metal | |
| Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings | Description: ASTM D 7091 and NCh-1007 Of. 1989. Method: ASTM D7091, NCh-1007 Of. 1989. | Metal | |
| Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials | Description: Weatherometry, U.V. exposure Method: ASTM G155 | Metal | |
| Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials. 1A | Description: Evaluation of coatings exposed to atmospheric corrosion Method: | Metal | |
| Paints and varnishes determination | Description: Film thickness Method: ISO 2178 | Metal | |
| Paints and varnishes determinations. 1A MT | Description: Coating Thickness Amplitude Sensitive Eddy Current (Eddy Current) Method Method: ISO 2360 | Metal | |
| Pending test for low alloy steel and Bar geometry measurement for low alloy steel | Description: BS EN ISO15630-1 Method: EN ISO 15630-1 | Metal | |
| PENT (Pennsylvania Notch Test) test. | Description: Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins Method: ASTM F1473 | Metal | |
| Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution | Description: Method B Method: ASTM G48 | Metal | |
| Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution (method A) | Description: Method A. Method: ASTM G48 | Metal | |
| Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution (method A). Open | Description: Method A. Method: ASTM G48 | Metal | |
| Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution (method C) | Description: Method C. Method: ASTM G48 | Metal | |
| Preparation and analysis of micro specimen for ferrite count | Description: Microstructure examination Method: ASTM E3, ASTM E407 | Metal | |
| Pull-of test for adhesion | Description: ISO 4624 Method: ISO 4624 | Metal | |
| Pull-off test for adhesion. E | Description: Method E Method: ASTM 4541 | Metal | |
| Pullout (Static) and Compression bending (Static) test | Description: Pullout Static (Maximum Pullout load); and Compression Bending Static (Stiffens; Maximum Load; Displacement at ultimate load; Yield load; Displacement at yield load; Displacement at 2%; and Elastic displacement) Method: ASTM F1717, ASTM F543 | Metal | |
| Qualitative XRD examination | Description: X-ray diffraction analysis and Crystallographic texture Method: EN 13925-2 | Metal | |
| Reinforcement steel bars for mechanical properties Rm and Re determinations | Description: Method: EN ISO 15630-1 | Metal | |
| Resistance to stone impact | Description: 18 days. Method B Method: ISO 20567-1 | Metal | |
| Resistivity of Electrical Conductor Materials | Description: Resistivity Method: ASTM B193 | Metal | |
| Salt Spray determinations | Description: Galvanized Steel and Pre-painted Galvanized Steel, samples. (500 hours) Method: ASTM B117 | Metal | |
| Silicon gravimetric analysis | Description: ASTM E350 Method: ASTM E350 | Metal | |
| SOHIC determination | Descripcion: | Metal | |
| Specific migration of heavy metals in metal article | Description: Simulant: Artificial Tap Water, 5 g/L Citric Acid Method: EN 13130-1 | Metal | |
| SSC (Sulfide stress cracking) test. AA | Description: Method A Solution A Method: ANSI/NACE TM0177 | Metal | |
| SSC (Sulfide stress cracking) test. AB | Description: Method A – Solution B Method: ANSI/NACE TM0177 | Metal | |
| SSC four point bend | Description: Solution A – 720 hs Method: NACE TM 0316 | Metal | |
| Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels. ABCE | Description: ASTM A262 Practice A, B, C and E Method: ASTM A262 | Metal | |
| Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels. AE | Description: ASTM A262 Practice A and E Method: ASTM A262 | Metal | |
| Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels. BC | Description: ASTM A262 Practice B and C Method: ASTM A262 | Metal | |
| Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels. C | Description: ASTM A262 Practice C Method: ASTM A262 | Metal | |
| Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels. CE | Description: Practice C & E Method: ASTM A262 | Metal | |
| Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels. Open | Description: ASTM A262 Practice A and E Method: ASTM A262 | Metal | |
| Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels.B | Description: ASTM A262 Practice B Method: ASTM A262 | Metal | |
| Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels.E | Description: ASTM A262 Practice E Method: ASTM A262 | Metal | |
| Static test and fatigue in bone plates | Description: Method: ASTM F382 | Metal | |
| Steels Determination of depth of decarburization | Description: EN ISO 3887 Method: EN ISO 3887 | Metal | |
| Surface area for metal powders (BET) | Description: BET 5 Point analysis (Nitrogen Gas) Method: ASTM B922 | Metal | |
| Surface discontinuities of bolts | Description: microscopic method – requirements S1 Method: ASTM F788 | Metal | |
| Tensile test determination | Description: Method: EN ISO 15630-3 | Metal | |
| Tensile Testing of Metallic Materials. 150 | Description: Method of Test at Elevated Temperatures (150 °c) Method: ISO 6892-2 | Metal | |
| Tensile Testing of Metallic Materials. 250 | Description: Method of Test at Elevated Temperatures (350 °c) Method: ASTM E21 | Metal | |
| Tensile Testing of Metallic Materials. 980 | Description: Method of Test at Elevated Temperatures (980 °c) Method: ASTM E21 | Metal | |
| Tensile testing on steel | Description: Method: ASTM A706 | Metal | |
| Tension test on aluminum | Description: Method: ASTM B557, IS 1608, ISO 6892 | Metal | |
| Tension testing Autographic method | Description: clause 7.7.3 Method: ASTM E8 | Metal | |
| Tension testing of steel | Description: Ultimate tensile strength in MPa, Yield strength offset = 0,2% in MPa, Elongation in %, Reduction of area in %. Method: ASTM E8, ISO 6892-1, EN 10002-1, IRAM IAS U500 102, GB/T 228.1, GOST 1497, TCVN 197-1 | Metal | |
| Tension testing of steel wire | Description: Ultimate tensile strength in MPa, Yield strength offset = 0,2% in MPa, Elongation in %, Reduction of area in %. Method: ASTM E8 | Metal | |
| Tension testing on steel | Description: Ultimate tensile strength in MPa, Yield strength offset = 0,2% in MPa, Elongation in %, Reduction of area in %. Method: ASTM E8, ISO 6892-1, EN 10002-1, IRAM IAS U500 102, GB/T 228.1, GOST 1497, TCVN 197-1 | Metal | |
| Tension testing on steel (Flat sample) | Description: Ultimate tensile strength in MPa, Yield strength offset = 0,2% in MPa, Elongation in %, Reduction of area in %. Method: GB/T 228.1, ISO 6892, ASTM E8, GOST 1497 | Metal | |
| Tension Testing on steel (sheet sample) | Description: Ultimate tensile strength; Upper Yield strength; and Elongation in % according Method: ASTM A370 | Metal | |
| Test of charge to break Sling | Description: ASME B30.9:2006 Method: ASME B30.9 | Metal | |
| Test of Salt Spray | Description: ASTM B117 Method: ASTM B117 | Metal | |
| Testing Water Resistance of Coatings in 100% Relative Humidity | Description: 240 hours. Method: ASTM D2247 | Metal | |
| Testing Water Resistance of Coatings Using Water Fog Apparatus | Description: ASTM D1735 Method: ASTM D1735 | Metal | |
| Torsion, driving torque and pullout test on bone screws | Description: Yield Torque; Maximum Torque; Breaking Angle; Insertion Torque; Removal Torque; and Maximum pullout load Method: ASTM F543 | Metal | |
| Transverse tensile test Destructive tests on welds in metallic materials | Description: Transverse tensile test Method: ISO 4136 | Metal | |
| Viscosity determining corrosion inhibitors | Description: ASTM D2196 Method: ASTM D2196 | Metal | |
| Welded mesh for shear force determinations | Description: Method: ISO 15630-2 | Metal | |
| Wire Simple torsion test | Description: ISO 7800 Method: ISO 7800 | Metal | |
| Wire determinations | Description: Method: ASTM B3, ASTM B193 | Metal | |
| X-Ray Fluorescence in stainless steel | Description: X-Ray Fluorescence: Mn; P; Si; Cr; Ni; Mo; Cu; V; and Nb Method: ASTM E572 | Metal | |
| Zinc coating mass of flat steel determinations | Description: Zinc coating mass of flat Steel Method: ASTM A90 | Metal | |
close
