Name | Summary | Categories | Buy |
---|---|---|---|
Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion | Description: Method: | Plastic | |
Aging behavior. Weathering in dry, hot climate | Description: Duration: 1600 hs Method: PV 3929 | Plastic | |
Aging behavior. Weathering resistance, humid heat | Description: Duration: 1600 hs Method: PV 3930 | Plastic | |
Ash Content in Plastics | Description: Method: ASTM D5630 | Plastic | |
Ash determination in PVC pipes and connections | Description: Method A Method: NBR NM 84 | Plastic | |
Bulk density and volatile matter determinations in Polyvinyl chloride | Description: Bulk density and Volatile matter Method: ASTM D2584, ASTM D1622 | Plastic | |
Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems | Description: Method: ASTM D2846 | Plastic | |
Coefficients of friction | Description: Method: ASTM D1894 | Plastic | |
Colorants in plastic materials determination | Description: Colorants in plastic materials and articles coming into contact with food. No visible migration (for finished products); Metals and metalloids; Carbon black (only for carbon black); Inorganic cadmium pigments; Unsulphonated Aromatic amines(only for powder sample, and indicate test according to pigments or dyes ); Specific aromatic amine(Benzidine, 2-naphthylamine, 4-aminodiphenyl) and sulphonated aromatic amines; and Polychlorinated biphenyls Method: Council of Europe AP(89)1 | Plastic | |
Compressive properties of oriented fiber-resin composites determination | Description: Compressive properties of oriented fiber-resin composites determination Method: SACMA SRM-IR-94 | Plastic | |
Compressive properties of rigid plastics determination | Description: Compressive properties of rigid plastics determination Method: ASTM D695 | Plastic | |
Continuous compression deformation test | Description: Aging of elastomeric parts in greenhouses with measurement of hardness variation IRHD; Aging of elastomeric parts in corn oil with IRHD hardness variation measurement; Aging of the elastomeric parts in distilled water with volume variation measurement; Aging of the elastomeric parts in acetic acid with volume variation measurement; and Permanent Compression Deformation Method: NBR 11823 | Plastic | |
Crush resistance in pipes and connections determination | Description: Method: ASTM D2241, ASTM D1785 | Plastic | |
Density and Specific Gravity (Relative Density) of Plastics by Displacement | Description: ASTM D792 Method: ASTM D792 | Plastic | |
Determination of 2 % Secant Modulus for Polyethylene Geomembranes | Description: Method: ASTM D5323 | Plastic | |
Determination of ash content in thermoplastics | Description: Method: ASTM D5630 | Plastic | |
Determination of ash content on PVC pipes and fittings | Description: Ash Method: ASTM D5630 | Plastic | |
Determination of Chloroform Soluble Extractive in Resinous and polymeric coatings use as food contacting material | Description: Simulant: Deionized Water, EtOH 8%, n-Heptane Method: 21 CFR 175.300 | Plastic | |
Determination of density of plastics by the density gradient technique. Gradient Column | Description: Method: ASTM D1505 | Plastic | |
Determination of melt flow rate (MFR) and melt volume rate (MVR) | Description: Method: ASTM D1238 | Plastic | |
Determination of resistance to external blows | Description: Round-the-clock method Method: ISO 3127 | Plastic | |
Determination of the index of fluidity in samples plastic | Description: Method: ASTM D1238 | Plastic | |
Determination of the transition temperature of polymers by differential scanning calorimetry | Description: Method: ASTM D3418 | Plastic | |
Determination of Thickness of Plastic Film Test Specimens | Description: ASTM D6988 Method: ASTM D6988 | Plastic | |
Determinations in plastic | Description: compressive test and cross cut test Method: ISO 2409, ISO 604 | Plastic | |
Determining the Izod Pendulum Impact Resistance of Plastics | Description: Method: ASTM D256 | Plastic | |
Different determinations for Nylon Resins use as food contacting material | Description: Extractable Fractions in Nylon Resins (Deionized Water extractives, 95% ethanol extractives, Ethyl acetate extractives, and Benzene extractives); Specific Gravity in Nylon; Melting Point in Nylon Resins; and Solubility in Boiling HCl in Nylon Resins Method: 21 CFR 177.1500 | Plastic | |
Different determinations for Olefin polymers use as food contacting material | Description: Determination of Extractable Fraction for Olefin polymers (Hexane); Determination of Soluble Fraction for Olefin polymers (Xylene); Determination of Density for Olefin polymers; and Determination of Melting Point for Olefin polymers Method: 21 CFR 177.1520 | Plastic | |
Dimensional stability of PVC pipes | Description: Method: NBR 5687 | Plastic | |
Dimensions of Thermoplastic Pipe and Fittings | Description: Method: ASTM D2122 | Plastic | |
Elemental analysis on polymeric materials by FTIR | Description: Method: ASTM E1252 | Plastic | |
Epoxy resins determination | Description: Restriction of use of certain epoxy derivatives. Overall migration in 10% ethanol (pH>4.5 aqueous foods); Overall migration in 3% acetic acid (pH?4.5 acidic foods); Overall migration in 20% ethanol (alcohol content?20% foods); Overall migration in 50% ethanol (alcohol content>20% or oil in water emulsions); Overall migration in rectified olive oil or substitute of rectified olive oil (fatty foods); Specific migration of primary aromatic amine in 3 % acetic acid; and Soluble heavy metal (Al, Ba, Co, Cu, Fe, Li, Mn, Zn,Ni) Method: Commission Regulation (EU) No 10/2011, Commission Regulation (EC) No 1895/2005 | Plastic | |
Exposure to Laboratory Light Sources: Accelerated UV Ageing. PT | Description: Exposure to Laboratory Light Sources. Accelerated UV Ageing. (10 cycles of 8 hours of UVA-340 ultraviolet light at 60°C, followed by 4 hours of condensation (simulating dew) at 50°C.); and Color Determination of Plastic Pellets Method: ASTM G154, ASTM D6290 | Plastic | |
Exposure to Laboratory Light Sources: Xenon Arc Lamps | Description: Exposure to Laboratory Light Sources: Xenon Arc Lamps (300 hours); and Color Determination Method: ISO 4892-2, ASTM D6290 | Plastic | |
Fiber Reinforced Plastics test | Description: ISO 527-4, ISO 527-5, ISO 14125, ISO 14126, & ISO 14130. Method: ISO 527-4, ISO 527-5, ISO 14125, ISO 14126, ISO 14130 | Plastic | |
Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints | Description: Pressure test for leakproofness Method: ISO 3603 | Plastic | |
Flammability in plastics | Description: Flammability Method: UL 94 | Plastic | |
Fluorescent Ultraviolet (UV) Exposure of Photodegradable plastics | Description: Exposure of Photodegradable plastics. Method: ASTM D5208 | Plastic | |
Heavy Metal content in plastics | Description: Lead, Zinc, Cadmium, Mercury, and Arsenic Method: | Plastic | |
Hot seal strength determination | Description: Method: ASTM F1921 | Plastic | |
Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material | Description: Energy dispersive X-ray spectrometry Method: ASTM F2617 | Plastic | |
Impact Resistance of Plastic Film by the Free-Falling Dart Method. PT | Description: Impact resistance. Method: ASTM D1709 | Plastic | |
In-plane shear response of polymer matrix composite materials by tensile test of a +/- 45° laminate determination | Description: In-plane shear response of polymer matrix composite materials by tensile test of a +/- 45° laminate determination Method: ASTM D3518 | Plastic | |
Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals | Description: Method: ASTM D3212 | Plastic | |
Longitudinal reversion | Description: Thermal reversion Method: ISO 2505 | Plastic | |
Melt Flow Rates of Thermoplastics by Extrusion Plastometer | Description: Method: ASTM D1238 | Plastic | |
Nylon products determination. PT | Description: Plastic materials and articles intended to come into contact with food. Overall migration in 10% ethanol (pH>4.5 aqueous foods); Overall migration in 3% acetic acid (pH?4.5 acidic foods); Overall migration in 20% ethanol (alcohol content?20% foods); Overall migration in 50% ethanol (alcohol content>20% or oil in water emulsions); Overall migration in rectified olive oil or substitute of rectified olive oil (fatty foods); Specific migration of primary aromatic amine in 3 % acetic acid; Soluble heavy metal (Al, Ba, Co, Cu, Fe, Li, Mn, Zn,Ni); and Specific migration of caprolactam in 3% acetic acid Method: Commission Regulation (EU) No 10/2011 | Plastic | |
OD Test | Description: Method: ASTM D1505 | Plastic | |
Open-hole compressive strength of polymer matrix composite laminates determination | Description: Open-hole compressive strength of polymer matrix composite laminates determination Method: ASTM D6484 | Plastic | |
Open-hole testing strength of polymer matrix composite determination | Description: Open-hole testing strength of polymer matrix composite determination Method: ASTM D5799 | Plastic | |
PBBS & PBDES determinations in plastic | Description: Method: | Plastic | |
Physicochemical Tests for Plastic pharmaceutical Containers | Description: USP <661> Method: USP 661 | Plastic | |
Plastic chairs determinations | Description: Visual verification; Dimensional verification; Static load test; Impact resistance test; and Test for strength of hind legs Method: NBR 14776 | Plastic | |
Plastic corrosivity | Description: Weight loss in HCL 10%, Weight loss in NA OH 10%, and Weight loss in Dis.water Method: | Plastic | |
Plastic determinations. 1A | Description: Glass transition temperature and glass transition step height; and TGA Thermogravimetry Method: ISO 11358-1, ISO 11357-2 | Plastic | |
Plastic determinations. 1B | Description: Overall Migration from plastic using MPPO as a simulant; and BISPHENOL A Method: EN 1186-13 | Plastic | |
Plastic determinations. 1C | Description: Density; Melt Flow index; Mechanical properties; Dimensions of the tubes; Resistance to internal pression; and Tear resistance Method: ISO 3126, ISO 1167, EN 388, ISO 527, ISO 1133-1, ISO 1183-1 | Plastic | |
Plastic determinations. 1D | Description: Temperature and enthalpy of melting and crystallization; and TGA Thermogravimetry Method: ISO 11358-1, ISO 11357-3 | Plastic | |
Plastic determinations. 1E | Description: Burning behavior by oxygen index (Ambient-temperature test) Method: ISO 4589-2 | Plastic | |
Plastic FTIR Spectrophotometer | Description: FTIR Spectrophotometer Method: | Plastic | |
Plastic tensile properties | Description: plasticized PVC hose. ASTM D638 Method: ASTM D638 | Plastic | |
Plastics Methodology for Assessing Polymer Photo-aging by FTIR | Description: 300 hrs and compare carbonyl Method: ISO 10640 | Plastic | |
Polycarbonate products determination | Description: Plastic materials and articles intended to come into contact with food. Overall migration in 10% ethanol (pH>4.5 aqueous foods); Overall migration in 3% acetic acid (pH?4.5 acidic foods); Overall migration in 20% ethanol (alcohol content?20% foods); Overall migration in 50% ethanol (alcohol content>20% or oil in water emulsions); Overall migration in rectified olive oil or substitute of rectified olive oil (fatty foods); Specific migration of primary aromatic amine in 3 % acetic acid; Soluble heavy metal (Al, Ba, Co, Cu, Fe, Li, Mn, Zn,Ni); and Specific migration of BPA in 50% ethanol Method: Commission Regulation (EU) No 10/2011 | Plastic | |
Polyethylene determinations | Description: Melt Flow Index (MFI); density by displacement; and density by gradient technique, Method: ASTM D1238, ASTM D792, ASTM D1505 | Plastic | |
Polymer determinations. 1A | Description: Limiting Oxygen Index Method: ISO 13501 | Plastic | |
Polymer determinations. 1B | Description: Tensile & Elongation Method: ISO 188, ISO 37 | Plastic | |
Polymers and Phenolic resins determinations | Description: Heat and temperatures of reaction by differential scanning calorimetry, and Termogravimety (mass loss) and differential scanning calorimetry Method: ISO 11357, ISO 11358, ISO 11409 | Plastic | |
Polyurethane Raw Materials Determination of the Isocyanate Content of Aromatic Isocyanates | Description: Determination of the Isocyanate content of aromatic Isocyanates Method: ASTM D5155 | Plastic | |
PVC tubes determinations | Description: Vicat softening temperature; resistance to internal hydraulic pressure sustained for a long period pipes and fittings; Resistance to internal hydraulic pressure for a short period in pipes and fittings; Dimensions in pipes and fittings; Pipes and Fittings – Flammability of Plastic; Tightness of the joint ring of elastomeric material; and Determining the rigidity of plastic tubes Method: ASTM D2412, ASTM D3212, ASTM D635, ASTM D2122, ASTM D1598, ASTM D1599, ISO 2507-1, ISO 2507-2 | Plastic | |
Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position | Description: Method: ASTM D635 | Plastic | |
Resistance to impact on pipes and connections | Description: Method: ASTM D224 | Plastic | |
Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings | Description: Method: ISO 1167, ASTM D1599 | Plastic | |
Rigidity of plastic tubes determination | Description: Method: ASTM D2412 | Plastic | |
Rubber products determination | Description: Rubber products intended to come into contact with foodstuffs. Overall migration in 10% ethanol (pH>4.5 aqueous foods); Overall migration in 3% acetic acid (pH?4.5 acidic foods); Overall migration in 20% ethanol (alcohol content?20% foods); Overall migration in rectified olive oil or substitute of rectified olive oil; Overall migration in 50% ethanol (alcohol content>20% or oil in water emulsions); Nitrosamine and Nitrosatable; and Specific migration of aromatic amine Method: Europe Council Resolution ResAP (2004)4 | Plastic | |
Short-Beam strength of polymer matrix composite materials and their laminates determination | Description: Short-Beam strength of polymer matrix composite materials and their laminates determination Method: ASTM D2344 | Plastic | |
Specific Migration of PAH and formaldehyde and acetaldehyde | Description: Specific Migration of PAH (Deionized Water, or 3% Acetic Acid, or Olive Oil) and specific migration of formaldehyde and acetaldehyde (Deionized Water, and 3% Acetic Acid) Method: EN 13130-1 | Plastic | |
Taber Abrasion | Description: ASTM D3389 and NCh 773/2 Of. 1992. Method: ASTM D3389, NCh 773/2 Of. 1992. | Plastic | |
Tear-propagation resistance determination | Description: Method: ASTM D1938 | Plastic | |
Tensile Properties of Plastics | Description: Method: ASTM D638 | Plastic | |
Tensile properties of polymer matrix composite materials | Description: Tensile properties of polymer matrix composite materials Method: ASTM D3039 | Plastic | |
Tensile Properties of Thin Plastic Sheeting | Description: ASTM D882 Method: ASTM D882 | Plastic | |
Test Method for Propagation Tear Resistance of Plastic Film | Description: ASTM D1922 Method: ASTM E1922 | Plastic | |
Test methods for the resistance to dichloromethane at a specified temperature (DCMT) | Description: Unplasticized poly(vinyl chloride) (PVC-U) pipes. Method: EN 580 | Plastic | |
Test of resistance to stress and thermal reversion in plastics | Description: Method: ASTM D638, ISO 2525 | Plastic | |
Thermal conductivity in polymers | Description: thermal conductivity Hot Disk tps 1500 Method: ISO 22007-2 | Plastic | |
Thermal insulating products for building applications. 1A | Description: Determination of deformation under specified compressive load and temperature conditions Method: EN 1605 | Plastic | |
Thermal insulating products for building applications. 1B | Description: Determination of dimensional stability Method: EN 1603, EN 1604 | Plastic | |
Thermal insulating products for building applications. 1C | Description: Determination of bending behavior Method: EN 12089 | Plastic | |
Thermal insulating products for building applications. 1D | Description: Determination of compression behavior Method: EN 826 | Plastic | |
Time-to-Failure of Plastic Pipe Under Constant Internal Pressure | Description: Method: ISO 1167, ASTM D1598 | Plastic | |
Tubes and connections dimensions determination | Description: Method: ASTM D2122, ISO 3126 | Plastic | |
Vicat softening temperature determination | Description: Method: ISO 2507-1, ISO 2507-2 | Plastic | |
Water Absorption of Plastics | Description: Method: ASTM D570 | Plastic | |
Water vapor transmission rate determination | Description: Method: ASTM F1249 | Plastic | |
Wetting tension test | Description: Method: ASTM D2578 | Plastic | |
Papel y carton
Juguetes
Quimicos
Quimicos
Inspecciones
Textiles
¿No encontras el programa que buscar? podes sugerirnos o diseñar el tuyo.
Gracias. Te responderemos muy pronto.