English
Français
Español| Name | Summary | Categories | Buy |
|---|---|---|---|
| Abrasion resistance of soles determination | Description: Abrasion resistance Method: ISO 4649 | Textile | |
| Abrasion Resistance of Textile Fabrics | Description: Martindale Abrasion Tester Method Method: ASTM D4966 | Textile | |
| Abrasion test in Textile | Description: Martindale method Method: EN 13520 | Textile | |
| Absorbency of Textiles | Description: Method: AATCC 79 | Textile | |
| Aircraft textile materials fire test | Description: Vertical bunsen burner test, 45º Degree bunsen burner test, Horizontal bunsen burner test, 60º Degree bunsen burner test, and Oil burner test for seats cuchions. Method: CS/FAR 25, DOT/FAA/AR-00/12 Aircraft materials fire test handbook | Textile | |
| Alkylphenol ethoxylates determination | Description: APEO Method: ISO 18254 | Textile | |
| Analysis of flex resistance determinations | Description: Flex resistance (Dry 100.000 cycles) Method: ISO 17694 | Textile | |
| Analysis of slip resistance determinations | Description: Resistance determination of footwear. Method: ISO 13287 | Textile | |
| Apparent density and mass per unit area of leathers. | Description: Apparent density and mass per unit area Method: ISO 2420 | Textile | |
| Assessment of resistance of materials to molten metal splash | Description: Assessment of resistance of materials to molten metal splash Method: ISO 9185 | Textile | |
| Azo dyes in textile | Description: Method: ISO 14362-1 | Textile | |
| Breaking force and extension at break of shoe laces | Description: Dry and Wet Method: SATR TM94 | Textile | |
| Burning behavior measurement of flame spread properties of vertically oriented | Description: Method: ISO 6941 | Textile | |
| Bursting strength and bursting distension determinationin textile | Description: Bursting strength; and Bursting distension Method: ISO 13938-1 | Textile | |
| Bursting Strength of Textiles | Description: bursting strength of textilesconstant-rate-of-traverse (CRT) Ball Burst Test Method: ASTM D3787 | Textile | |
| Carpets determination | Description: Determination of tuft withdrawal force Method: ISO 4919 | Textile | |
| Change of colour with accelerated ageing in leather | Description: Heat aging in a stove at 60 ºc for 24 hours (Method 6A); and Heat aging and humidity in a climatic chamber at 50 ºc and 90% hr for 24 hours (Method 7A) Method: ISO 17228 | Textile | |
| Chemical tests in leather | Description: pH Method: ISO 4045 | Textile | |
| Childrens clothing determinations | Description: Cords and drawstrings on children’s clothing. Method: CNS 15291 L1037 | Textile | |
| Chromium VI in leather | Description: Chromium VI Method: ISO 17075 | Textile | |
| Closure strength of touch and close fasteners | Description: Peel + shear; and peel + shear after fastener 5000 revolutions Method: SATRA TM123 | Textile | |
| Color fastness to laundering | Description: C1S & C2S Method: ISO 105-C06 | Textile | |
| Color fastness to organic solvents determination | Description: To organic solvents Method: ISO 105 X05 | Textile | |
| Color fastness to rubbing Veslic | Description: Dry felt and wet felt Method: ISO 11640 | Textile | |
| Color fastness to washing | Description: ISO 105-C06:1994 Method: ISO 105-C06 | Textile | |
| Colorfastness determination in watersea | Description: Method: AATCC 106 | Textile | |
| Colorfastness to Laundering: Accelerated | Description: AATCC 61 Method: AATCC 61 | Textile | |
| Colour fastness determinations in textile | Description: Determinations of colour fastness to perspiration; colour fastness to rubbing; and colour fasness to hot pressing. Method: ISO 105 E04, ISO 105 X12, ISO 105 X11 | Textile | |
| Colour fastness to bleaching determination in textile | Description: colour fastness to bleaching (Hypochlorite) Method: ISO 105 N01 | Textile | |
| Colour fastness to circular rubbing | Description: Dry 256 revolutions and wet 128 revolutions Method: SATRA TM8 | Textile | |
| Colour fastness to hot pressing | Description: Method: ISO 105 X11 | Textile | |
| Colour fastness to rubbing determination in Textile. 1A | Description: Colour fastness to rubbing Method: EN ISO 17700 A | Textile | |
| Colour fastness to rubbing determination in Textile. 1B | Description: Colour fastness to rubbing Method: ISO 105 X2 | Textile | |
| Colour fastness to sea water | Description: Method: AATCC 106, ISO 105-E02 | Textile | |
| Colour fastness to washing with soap or soap and soda | Description: Method: ISO 105 C10 | Textile | |
| Colour fastness to water and perspiration | Description: Method 1 water and method 2 alkaline solution of artificial perspiration Method: SATRA TM335 | Textile | |
| Colour fastness to water spotting determination | Description: Colour fastness to water spotting Method: ISO 15700 | Textile | |
| Combustibility of covered furniture | Description: IMO A.652 (16) Annex 1, Part 8 of the Fire Test Procedures Code, Resolution MSC.61 (67) Method: IMO A.652 | Textile | |
| Combustibility of Textil | Description: IMO A.652 (16) Annex 1, Part 7 of the Fire Test Procedures Code, Resolution MSC.61 (67) Method: IMO A.652 | Textile | |
| Crease recovery angle determination | Description: Recovery form creasing of a horizontally folded specimen by measuring the angle of recovery Method: EN 22313 | Textile | |
| Density and number of rows / columns positions in knitted fabrics | Description: Method: NBR 12060, NBR 10589 | Textile | |
| Density determination for outsoles | Description: Density (Method A) Method: ISO 2781 | Textile | |
| Density determination of leather | Description: Density Method: ISO 2781 | Textile | |
| Detection of the use of certain azocolorants accessible with and without extracting the fibers | Description: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene Method: ISO 14362-3, ISO 14362-1 | Textile | |
| Determination of absorption in nonwovens | Description: Absorption Method: ISO 9073-6 | Textile | |
| Determination of breaking strength and elongation of fabrics | Description: ASTM D5034 (NTC 754-1) Method: ASTM D5034, NTC 754-1 | Textile | |
| Determination of burning behaviour | Description: method A. Method: ISO 15025 | Textile | |
| Determination of coating adhesion Textile | Description: Determination of coating adhesion Method: ISO 2411 | Textile | |
| Determination of color fastness to light and transpiration. | Description: AATCC 15 and AATCC 16 (NTC 1479 and 772) Method: AATCC 15, AATCC 16, NTC 1479, NTC 772 | Textile | |
| Determination of color fastness to rubbing | Description: Dry and wet Method: AATCC 8, NTC 786 | Textile | |
| Determination of colour fastness to chlorinated pool water. | Description: ISO 105-E03 and NTC 850 Method: ISO 105-E03, NTC 850 | Textile | |
| Determination of colour fastness to sea water | Description: NTC 850 Method: NTC 850 | Textile | |
| Determination of dimensional change in washing and drying | Description: ISO 5077 Method: ISO 5077 | Textile | |
| Determination of dimensional stability to washing | Description: BS EN ISO 6330 Method: BS EN ISO 6330 | Textile | |
| Determination of distension and strength of surface in leather | Description: Distension and strength of surface Method: ISO 3379 | Textile | |
| Determination of ethoxylated alkylphenols | Description: Method: ISO/DIS 18218-2 | Textile | |
| Determination of Extractable Metals in textile | Description: Determination of Extractable Metals (Lead (Pb), Cadmium (Cd), Mercury (Hg), Arsenic (As), Copper (Cu), Cobalt (Co), Chromium (Cr), Nickel (Ni), Antimony (Sb)) by Salivary Solution (by ICP-MS) Method: DIN 54233-4 | Textile | |
| Determination of fabric propensity to surface fuzzing and to pilling | Description: Modified Martindale method Method: EN ISO 12945-2 | Textile | |
| Determination Of Flex Resistance in leather | Description: Flexometer Method Method: ISO 5402-1 | Textile | |
| Determination of formaldehyde in textiles | Description: Method: VDA 275, ISO 14184-1 | Textile | |
| Determination of heat transmission on exposure to flame | Description: Heat transmission Method: ISO 9151 | Textile | |
| Determination of length, width of fabric roll | Description: Method: ISO 2286-1 | Textile | |
| Determination of mass per unit area of fabric | Description: ISO 3801 Method: ISO 3801 | Textile | |
| Determination of mass per unit area using small samples | Description: ISO 12127 Method: ISO 12127 | Textile | |
| Determination of maximum force and elongation at maximum force using the strip method | Description: Method: ISO 13934-1 | Textile | |
| Determination of maximum force and elongation at maximum force using the strip method. Open | Description: ISO 13934-1 Method: ISO 13934-1 | Textile | |
| Determination of maximum force to seam rupture using the grab method | Description: Maximum force to seam rupture Method: ISO 13935-2 | Textile | |
| Determination of maximum force using the grab method | Description: ISO 13934-2 Method: ISO 13934-2 | Textile | |
| Determination of number of threads per unit lenght | Description: BS 5441 Method: BS 5441 | Textile | |
| Determination of PCP in textile sample | Description: Textil (HPLC); and Standard solution (HPLC) Method: | Textile | |
| Determination of pH of aqueous extract | Description: ISO 3071 Method: ISO 3071 | Textile | |
| Determination of pH value in fabric | Description: AATCC 81 or ISO 3071 Method: AATCC 81, ISO 3071 | Textile | |
| Determination of resistance of the upper and lower terminals | Description: Slide fasteners. Zips Method: BS 3084 | Textile | |
| Determination of resistance to water penetration in textile | Description: Method: ISO 811 | Textile | |
| Determination of single-end breaking force and elongation at break | Description: Breaking force and Elongation at break (using constant rate of extension) Method: ISO 2062 | Textile | |
| Determination of softness and abrasion resistance in leather. | Description: Method: ISO 20344, ISO 17235 | Textile | |
| Determination of spirality after laundering | Description: Woven and knitted fabrics Method: ISO 16322-2 | Textile | |
| Determination of tear force of trouser-shaped test specimens | Description: UNE EN ISO 13937-2:2001 Method: ISO 13937-2 | Textile | |
| Determination of tear force wing- shaped test specimens | Description: EN ISO 13937-3 Method: EN ISO 13937-3 | Textile | |
| Determination of tear load in Leather | Description: Double edge tear Method: EN ISO 3377-2 | Textile | |
| Determination of tear resistance | Description: Method: ISO 4674-1, ISO 4674-2 | Textile | |
| Determination of tearing strength | Description: BS EN ISO 13937-1 Method: BS EN ISO 13937-1 | Textile | |
| Determination of the abrasion resistance of fabrics by the Martindale method | Description: Abrasion (50000 cycles) Method: ISO 12947-2 | Textile | |
| Determination of the number of rows / courses and columns in knitted fabrics | Description: Number of curses and column Method: NBR 12060 | Textile | |
| Determination of the number warp yarns and weft yarns | Description: ASTM D3775 (NTC 427) Method: ASTM D3775, NTC 427 | Textile | |
| Determination of the slippage resistance of yarns at a seam in woven fabrics | Description: Fixed seam opening method Method: ISO 13936-1 | Textile | |
| Determination of thickness of textiles and textile products | Description: Method: ISO 5084 | Textile | |
| Determination of volatile matter in leather | Description: Method: ISO 4684 | Textile | |
| Determinations in nonwovens | Description: Determination of mass per unit area Method: ISO 9073-1, EN 29073-1 | Textile | |
| Determinations of colour fastness to perspiration | Description: Colour fastness to perspiration Method: ISO 105 E04, GB/T 3922 | Textile | |
| Dimensional change after washing cloth home | Description: AATCC 135 Method: AATCC 135 | Textile | |
| Dimensional stability and wash/dry cycle | Description: Method: AATCC 150 | Textile | |
| Dimensional Stability During Domestic Washing And Drying Procedures | Description: Method: SANS 11167 | Textile | |
| Disperse dyes determination | Description: Disperse dyes Method: DIN 54231 | Textile | |
| Drying Rate of Fabrics | Description: Drying Rate of Textiles at their Absorbent Capacity: Air Flow Method; and Drying Rate of Fabrics: Heated Plate Method Method: AATCC 200, AATCC 201 | Textile | |
| Electric shock resistance of leather | Description: Electric shock resistance Method: ASTM F2412 | Textile | |
| Electrostatic (ESD) Garments Resistive Characterization | Description: ANSI/ESD STM2.1-1997 Method: ANSI/ESD STM 2.1 | Textile | |
| Emission of formaldehyde in fabrics | Description: Method: AATCC 112 | Textile | |
| ESD, Resistance to ground | Description: Footwear qualification Method: ANSI/ESD STM9.1 | Textile | |
| Extractable Metals in textiles | Description: Lead, Cadmium, Mercury, Arsenic, Copper, Cobalt, Chromium, Nickel and Antimony by ICP-MS) Method: EPA 3052 | Textile | |
| Extratible HM in textile | Description: Method: | Textile | |
| Fabric and leather determinations | Description: Determination of thickness; Flex resistance (Dry 100.000 cycles); Flexing resistance of outsole; and Fiber Analysis: Quantitative Method: AATCC 20A, ISO 20344, ISO 17694, ISO 2589 | Textile | |
| Fabric determinations | Description: Tissue weight; Density in flat tissues; and Tensile strength and elongation of flat fabrics. Method: NBR 10591, NBR 11912, NBR 10588 | Textile | |
| Failure in sewn seams determination in Textile | Description: Method: ASTM D1683 | Textile | |
| Fastness determination | Description: Colour fastness to chlorinated water; Colour fastness to sea water; and Colour fastness to water Method: ISO 105-E01, ISO 105-E02, ISO 105-E03 | Textile | |
| Fiber Analysis: qualitative and quantitative determinations | Description: AATCC 20 and AATCC 20A Method: AATCC 20, AATCC 20A | Textile | |
| Flame propagation determination | Description: Flame propagation (Method 1 samples <700 g/m2, and Method 2 samples >700 g/m2) Method: NFPA 701 | Textile | |
| Flame resistance in textile | Description: Method: ASTM D6413 | Textile | |
| Flammability of clothing | Description: Method: 16 CFR 1610, 16 CFR 1615, 16 CFR 1616 | Textile | |
| Flammability of fabric sample | Description: Method: 16 CFR 1500.52, 16 CFR 1500.53, 16 CFR 1500.51, 16 CFR 1500.48, 16 CFR 1500.49 | Textile | |
| Flammability of materials used in the occupant compartments of motor vehicles | Description: FMVSS 302 Method: FMVSS 302 | Textile | |
| Flammability of textile fabrics | Description: Method: ASTM D1230 | Textile | |
| Flammability test with 50 washes | Description: 16 CFR 1615 Method: 16 CFR 1615 | Textile | |
| Flammabilty Test | Description: Flammability Method: ISO 3795 | Textile | |
| Flex resistance test in Textile | Description: Flex resistance Method: EN 13512 | Textile | |
| Flexing resistance of upper materials Bally flexometer | Description: Dry 100.000 cycles; Wet 10.000 cycles; and Cold (-5ºc) 10.000 cycles Method: SATRA TM55 | Textile | |
| Footwear determination | Description: Sole bond strength test Method: ISO 17708 | Textile | |
| Footwear determinations Clamping strength | Description: Method: SATRA TM150, SATRA TM175, SATRA TM149 | Textile | |
| Footwear determinations Strength measurement | Description: Method: SATRA TM113, SATRA TM180, SATRA TM53 | Textile | |
| Footwear determinations Tear strength | Description: Method: ISO 4674-1, SATRA TM162, SATRA TM43 | Textile | |
| Footwear determinations. 02 | Description: Puncture resistance; Impact resistance of dropouts; Compression resistance of dropouts; Internal length of the stop; Cutting height; Corrosion resistance of metal stops Ergonomic characteristics; Tear resistance; and Seam resistance Method: ISO 17697, ISO 20344, ISO 34-1 | Textile | |
| Footwear determinations. 03 | Description: Breaking force of buckles (three point bending test); Strength of fastened buckles; and Hardness of rubber and plastics – durometer method (Type of durometer A or D) Method: SATRA TM141, SATRA TM151, SATRA TM205 | Textile | |
| Footwear determinations. 04 | Description: Tear strength (trouser leg method), and Peel strength of footwear sole bonds Method: SATRA TM30, SATRA TM411 | Textile | |
| Footwear determinations. 05 | Description: Method: SATRA TM51,SATRA TM52, SATRA TM226 | Textile | |
| Formaldehyde determination in Textile | Description: Formaldehyde Method: ISO 14184-1, ISO 14184-2, AATCC 112 | Textile | |
| Free formaldehyde determination | Description: Determination of the free formaldehyde in process auxiliaries Method: ISO 27587 | Textile | |
| Full Shoe Flex determination | Description: ½ pair 100.000 (cycles) Flexes Method: SATRA TM92 | Textile | |
| Furniture and fabric determinations. | Description: Cover Fabric Test; Barrier Materials Test; Resilient Filling Materials Test; General safety requirements; Stability; and Product information Method: California Technical Bulletin 117, EN 14749 | Textile | |
| Geotextile determinations | Description: Determining Apparent Opening Size of a Geotextile; Trapezoidal tear strength test; and Grab Breaking load and Elongation Method: ASTM D4533, ASTM D4632, ASTM D4751 | Textile | |
| Geotextile determinations | Description: | Textile | |
| Geotextile determinations. 01 | Description: Determination of water permeability test; and Characteristic opening size (AOS) Test Method: ISO 12956, ISO 11058 | Textile | |
| Geotextile determinations. 02 | Description: Tensile Properties; Trapezoid Tearing Strength; Grab Breaking Load and Elongation; and Index Puncture Resistance Method: ASTM D4833, ASTM D4533, ASTM D4632, ASTM D4595 | Textile | |
| Geotextile determinations. 03 | Description: Method: ISO 12236, ISO 10319, ISO 25619 | Textile | |
| Geotextile determinations. 04 | Description: Tensile Properties; Trapezoid Tearing Strength; Static Puncture Strength; and Grab Breaking Load and Elongation Method: ASTM D4632, ASTM D4533, ASTM D4595, ASTM D6241 | Textile | |
| Gowns determinations. | Description: Synthetic Blood Penetration Method: ISO 16603 | Consumer Good, Personal Safety, Textile | |
| Hardness determination in leather | Description: Hardness (Type A or Type D) Method: ISO 868 | Textile | |
| Heavy metals, Disperse dyes, Organo tins and Pthalates in polymers in Textiles | Description: Heavy metals; Disperse dyes; Organo tins; and Pthalates in polymers Method: ISO 105 E04, DIN 53316, ISO 17353, ASTM D3465, CPSC-CH-C1001-09 | Textile | |
| Heel fatigue resistance | Description: Heel fatigue resistance (2000 cycles) Method: ISO 19956 | Textile | |
| Hydraulic Bursting Strength of Textile Fabrics-Diaphragm Bursting Strength Tester Method | Description: Burst resistance Method: ASTM D3786 | Textile | |
| Lateral impact test for shoe heels | Description: Method: SATRA TM20 | Textile | |
| Lead determination in leather | Description: Method: ISO 17072-2 | Textile | |
| Lead determination in Textile | Description: Lead Method: CPSC-CH-E-1002-08.1, CPSC-CH-E-1003-09.1, CPSC-CH-E-1001-08.1 | Textile | |
| Leather Chemical determinations | Description: pH; Pb, Co, Cr and Ni; Chromium VI; and formaldehyde content Method: ISO 17075, ISO 17072-2, ISO 4045, ISO 17226-1, ISO 17072-1 | Textile | |
| Leather Physical and mechanical tests Determination of tear load | Description: Single edge tear resistance Method: ISO 3377-1 | Textile | |
| Leather and textile determinations. 1A | Description: Single edge tear; Double edge tear – Baumann; Vamp flex; Determination of the abrasion resistance of fabrics by the Martindale method (50000 cycles); and pH of textiles Method: ISO 12947-2, SATRA TM25, ISO 3377-1, ISO 3071, ISO 5402-2 | Textile | |
| Leather and textile determinations. 1B | Description: C/F to Rubbing (Veslic); C/F to Rubbing (circular) Dry: 256 revolutions; C/F to Rubbing (circular) wet: 128 revolutions; vamp Flex test (Room temperature. Dry: 100.000 cycles); vamp Flex test (Room temperature. wet: 100.000 cycles); Heel fatigue for shoe heels (20.000 cycles); Thickness of leather; Color fastness to water (method 1); and Color fastness to perspiration (method 2, alkaline solution) Method: ISO 5402-1, ISO 2589, ISO 11640 | Textile | |
| Leather determination | Description: Identification of leather with microscopy Method: ISO 17131 | Textile | |
| Leather determinations. 01 | Description: Resistance to water penetration Maeser, and Abrasion Resistance Method: ISO 4649, ASTM D2099 | Textile | |
| Leather determinations. 02 | Description: Paints and Varnishes. Cross-Cut Test; Chromium(VI); Colour fastness to cycles of to-and-fro rubbing; and Detrmination of 4-AMINOAZOBENZENE Method: ISO 2409, ISO 11640, ISO 17075, ISO 17234-2 | Textile | |
| Leather determinations. 03 | Description: Determination of the total metal content in leather; Determination of the total metal content in leather; tear strength of leather using a double edged tear; Behaviour of the surface of a leather on rubbing with a wool felt; Leather identification by microscopy; and Determination of the thickness of the surface coating Method: ISO 17186, ISO 17131, ISO 11640, EN ISO 3377-2, ISO 17072-1, ISO 17072-2 | Textile | |
| Leather determinations. 04 | Description: Impact from above with high energy droplets (Rain Tower) Method: EN 14360 | Textile | |
| Leather determinations. 05 | Description: Outsole flex resistance; Abrasion resistance test; PH Content; Metallic accessories Corrosion resistance; and Color fastness Rubbing test Method: AATCC 116, ISO 20344, ISO 4045, ISO 20871, ISO 22775, ISO 17707 | Textile | |
| Leather determinations. 06 | Description: Preparation of samples for chemical tests; Determination of volatile matters; Determination of pH; Method of determination of sulphated total ash and sulphated ash of insoluble in water. Method of determination of soluble materials in dichloromethane or other suitable solvents; Method of determination of soluble materials in dichloromethane or other suitable solvents; and Determination of the chromium oxide content of leather and its quantification by atomic absorption spectrometry Method: ISO 4045, ISO 4684, IRAM 8503, NTE INEN 1055, NTE INEN 1063, ISO 4044, ISO 5398-3 | Textile | |
| Leather determinations. 07 | Description: Thickness determination; Determination of tensile strength and percentage elongation; Determination of the resistance to tearing by the method of two edges on leathers; Tongue method for determining tear strength; and Determination of abrasion resistance by rotating drum device Method: ISO 2589, ISO 3376, ISO 3377-2, ISO 3377-1, ISO 4649 | Textile | |
| Leather determinations. 08 | Description: Slip Resistance test; Shoe peeling strength Test; Perspiration resistance test; and Water absorption & desorption test Method: ISO 5404, ISO 22649, ISO 22652, SATRA TM404, ISO 13287 | Textile | |
| Leather determinations. 09 | Description: pH; Colour fastness to perspiration; and Leather Chromium VI Method: ISO 17075, ISO 105 E04, ISO 4045 | Textile | |
| Leather determinations. 10 | Description: Tear strength (Double edge); tensile strength & extension; dynamic water resistance by Maeser tester; chromic oxide content; chromium (IV) content; and pH Method: ISO 4045, ISO 17075, ISO 3377-2, ISO 3376, ISO 5403-2, ISO 5398-1 | Textile | |
| Leather determinations. 11 | Description: Determination of thickness; density; determination of tear load; flex resistance; penetration resistance of inserts; outsole abrasion resistance; impact resistance; effect of high temperature for non-metals toecaps; flexing resistance of outsole; and electric shock resistance. Method: ISO 2589, ISO 2781, ISO 3377-2, ISO 20344, ISO 17694, ASTM F2412 | Textile | |
| Leather determinations. 12 | Description: Azo Dyes; and Pentachlorophenol Method: ISO 17234-1, ISO 17070, ISO 17234-2 | Textile | |
| Leather determinations. 13 | Description: Chromic Oxide in leather; Total Lead; and Chromium and Aluminum Method: ISO 5398-1, EN 71-3, CPSC-CH-E1002-08.3 | Textile | |
| Leather determinations. 14 | Description: pH; Cr VI; Formaldehyde; Phthalates; Heavy metals; and Organo tin Method: ISO 4045, ISO 17075, ISO/TS 17226-2, ISO/TS 16181, ISO 17072-2, EN 14602, ISO/TS 16179, HAP ZEK 01.4-08 | Textile | |
| Light fastness and evaluation of aging | Description: Method 3 Method: AATCC 16 | Textile | |
| Light fastness determination | Description: Determination (as bright+colour) moisturized sweat Method: ISO 105-B07 | Textile | |
| Light fastness determination. 01 | Description: Determination (as bright+colour) Method: ISO 105-B10 | Textile | |
| Light fastness determination. 02 | Description: Determination (as bright+colour) Method: ISO 105-B02 | Textile | |
| Light fastness determination. 03 | Description: Set 3 Method 4 – 320h Method: ISO 105-B06 | Textile | |
| Linear density determination in textiles | Description: Linear density Method: ISO 1973 | Textile | |
| Mask determinations | Description: Seam Strength (Per Seam Type) Method: EN 14325, EN 13935-2 | Textile | |
| Mask determinations. 01 | Description: Resistance to Dry Microbial Penetration Method: ISO 22612 | Textile | |
| Mask determinations. 02 | Description: Resistance to Wet Bacterial Penetration Method: ISO 22610 | Textile | |
| Mass Per Unit Area (Weight) of Fabric | Description: Method: ASTM D3776 | Textile | |
| Mass per unit area determinations in geotextiles | Description: Mass per unit area Method: ASTM D5261 | Textile | |
| Matter soluble in dichloromethane and free fatty acid content determination for leathers. | Description: Matter soluble in dichloromethane and free fatty acid content Method: ISO 4048 | Textile | |
| Measurement of thermal and water-vapour resistance under steady-state conditions in textile | Description: UNE – EN 31092:1996 Method: UNE – EN 31092 | Textile | |
| Mechanical and physical tests in leather | Description: Tensile strength and percentage elongation; tear load; Water vapour permeability and Water vapour absorption. Method: ISO 17229, ISO 14268, ISO 3377-2, ISO 3376 | Textile | |
| Moulded plastics footwear | Description: Lined or unlined polyurethane boots for general industrial use. Anex C (-5ºC x 150.000 cycles); and Lined or unlined poly(vinyl chloride) boots for general industrial use. Anex C (-5ºC x 150.000 cycles) Method: ISO 5423, ISO 4643 | Textile | |
| Non woven geotextile determinations | Description: Mass per unit area; determination of thickness at 2kpa presser; and static puncture test (CBR Test) Method: ISO 9864, ISO 9863-1, ISO 12236 | Textile | |
| Number of filaments of a thread | Description: In house methodology Method: | Textile | |
| Odors determination | Description: SNV 195 651 Method: Oeko-Tex 201 M-16 | Textile | |
| Organotin compounds determination | Description: ISO 16179 Method: ISO 16179 | Textile | |
| Parts Sizing determination | Description: Method: NBR 12071 | Textile | |
| Phthalates content determination in Textile | Description: Phthalates content Method: ISO 14362-1, ISO 17234-1 | Textile | |
| Phthalates in polymers | Description: Method: CPSC-CH-C1001-09.3 | Textile | |
| Physical determinations in leather | Description: Thickness; and Tensile strength and elongation Method: ISO 2589, ISO 3376 | Textile | |
| Pilling Resistance of Textile Fabrics | Description: ASTM D3512 (NTC 2051-2) Method: ASTM D3512, NTC 2051-2 | Textile | |
| Polycyclic aromatic hydrocarbons (PAH) determination | Description: PAH in footwear materials (by GC-MS ) Method: ISO/TS 16190 | Textile | |
| Preservatives determination in leather | Description: Preservatives Method: EN 71-9 | Textile | |
| Protective clothing determination | Descripcion: | Personal Safety, Textile | |
| Protective clothing determinations | Description: Puncture resistance; tear resistance; color measurement in new state; color measurement after exposure to light; determination of contact heat transmission through protective clothing or constituent materials; oil repellency-Hydrocarbon resistance test ; determination of resistance to damage by flexing method C: Crumple flex; abrasion resistance, Martindale Method: ISO 5740, ISO 7854,ISO 12127, ISO 14419, EN 863, ISO 9173-4, ISO 20471 | Textile | |
| Qualitative and quantitative analysis in textile | Description: Method: NBR 13538, NBR 11914 | Textile | |
| Qualitative and quantitative analysis of fibers | Description: Method: ISO 1833 | Textile | |
| Quantitative analysis of fibers. Textile | Description: NTC 481. Method: NTC 481 | Textile | |
| Quantitative Analysis of Textiles | Description: ASTM D629 Method: ASTM D629 | Textile | |
| Quantitative chemical analysis | Description: Separation of fibers Method: ISO 1833-3, ISO 1833-11, ISO 1833-10, ISO 1833-12, ISO 1833-13, ISO 1833-14, ISO 1833-16, ISO 1833-15, ISO 1833-17, ISO 1833-1, ISO 1833-18, ISO 1833-19, ISO 1833-20, ISO 1833-23, ISO 1833-22, ISO 1833-21, ISO 1833-24, ISO 1833-4, ISO 1833-5, ISO 1833-6, ISO 1833-7, ISO 1833-8, ISO 1833-9 | Textile | |
| Quantitative chemical analysis in fabric sample | Description: Mass fraction of polyester fiber mixed with cotton; Mass fraction of wool fiber in a two-component and pure-wool mixture; and Mass fraction of viscose fiber Method: GB/T 2910.14, GB/T 2910.8 | Textile | |
| Quantitative chemical analysis in textiles | Description: Mixtures of acetate and certain other fibres (method using acetone) Method: ISO 1833-3 | Textile | |
| Quantitative chemical analysis in textiles. 01 | Description: Ternary fiber mixtures Method: ISO 1833-2 | Textile | |
| Quantitative chemical analysis in textiles. 02 | Description: ISO 1833 Method: ISO 1833-1 (annex B). | Textile | |
| Resistance to water penetration determination | Description: Resistance to water penetration- after pretreatment-flexing; and resistance to water penetration- after pretreatment-influence of fuel and oil Method: EN 343 | Textile | |
| Respiratory protective devices | Description: Conditioning; Visual inspection; Inflammability; Penetration of filter material; Carbon dioxide content in the inhalation air; and Respiration resistance Method: EN 149 | Textile | |
| Rubber products determinations | Description: Chemical Analysis Method: ASTM D297 | Textile | |
| Safety shoes determinations | Description: Impact resistance; Slip Resistance; Thermal insulation; Electrical resistance; Hydrolysis; and Resistance to electrical voltage (Withstand test voltage) Method: EN 50321, ISO 20344 | Textile | |
| Seam strength determination for footwear sample | Description: Seam strength Method: ISO 17697 | Textile | |
| Shoe lace determinations | Description: Knot slippage test; Abrasion resistance (method 1 abrasion cycles 20.000); and Shoe lace to shoe lace and shoe lace to lace carrier abrasion (method 1 abrasion cycles 20.000) Method: SATRA TM154, SATRA TM195, ISO 22774 | Textile | |
| Skewness Change in Fabric and Garment Twist. | Description: Resulting from Automatic Home Laundering Method: NTC 5121, AATCC 179 | Textile | |
| Slide fasteners | Description: Resistance of slide fasteners Method: DIN 3419-1 | Textile | |
| Smoothness appearance of fabrics after cleansing | Description: Method: ISO 7768 | Textile | |
| Solar UV protective properties in textile | Description: Method: EN 13758-1 | Textile | |
| Solidity of dyes to sweat | Description: Method: AATCC 15 | Textile | |
| Sulphated total ash and sulphated water-insoluble ash determination for leathers | Description: Sulphated total ash and sulphated water-insoluble ash Method: ISO 4047 | Textile | |
| Surface active agents determinations | Description: Colour measurement (intrinsic yellowing, greying, whiteness); Tensile strength; Cotton fluidity; and Ash content Method: AS/NZS 4146, ISO 4312 | Textile | |
| Suture thread determinations | Description: Suture diameter determination test; Tensile Test; and Swage Test Method: NBR 13904 | Textile | |
| Tear strength and breaking strength and elongation determinations | Description: ASTM D 1424 Method: ASTM D1424, ASTM D5034 | Textile | |
| Tearing strength of fabrics by tongue | Description: Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine) Method: ASTM D2261 | Textile | |
| Tensile and elongation of yarn | Description: Method: | Textile | |
| Tensile strength and elongation for outsoles | Description: Tensile strength and elongation Method: EN 12803 | Textile | |
| Tensile Strength and elongation in leather | Description: Method: ISO 3376 | Textile | |
| Tensile strength determination in Textile | Description: Tensile strength Method: EN 13522 | Textile | |
| Tensile strength of zip fasteners | Description: Annex B, D, E, G, I, J, and H Method: EN 16732 | Textile | |
| Test for adhesion of finish in leather | Description: Method: ISO 11644 | Textile | |
| Test for colour fasness to hot pressing. | Description: ISO 105 X 11 and NTC 766. Method: NTC 766, ISO 105 X 11 | Textile | |
| Test for colour fastness to rubbing | Description: Method: ISO 105 X12, GB/T 3920 | Textile | |
| Test for Dimensional Change of Knit Cotton Fabric | Description: Method: ASTM D1231 | Textile | |
| Test Method for Linear Density of Yarn (Yarn Number) | Description: ASTM D1907 (NTC 842) Method: ASTM D1907, NTC 842 | Textile | |
| Test Method for Tearing Strength of Fabrics | Description: Falling-Pendulum (Elmendorf-Type) Apparatus Method: ASTM D1424, NTC 313-2 | Textile | |
| Test method for tensile properties of yarns | Description: Sinlge-strand method Method: ASTM D2256, NTC 386 | Textile | |
| Test Method for Width of Textile Fabric | Description: ASTM D3774 (NTC 228) Method: ASTM D3774, NTC 228 | Textile | |
| Test methods for footwear | Description: Specific ergonomic features; upper/outsole and sole interlayer bond strength; Sole interlayer bond strength; internal toecap length; impact resistance; compression resistance; Behaviour of toecaps clase I; Behaviour of inserts clase I; Behaviour of toecaps clase II; Behaviour of inserts clase II; Behaviour of non-metalic toecaps; Behaviour of non-metalic inserts; leakproofness; Dimensional conformity of inserts; Penetration resistance of the sole; Flex resistance of penetration -resistant insert; Slip resistance-SRA; Slip resistance-SRB; Slip resistance-SRC; Insulation against heat (150°C); Insulation against heat (250°C); Energy absorption of the seat region; Resistance to water for whole footwear; Thickness of upper; The height of the upper; Tear strength of the upper; Tear strength of the lining; Tear strength of the tongue; Tensile properties of the upper; Upper flexing resistance (rubber); Upper flexing resistance (polymer); Water vapour permeability; Water vapour coefficient; Ph value; Hydrolysis of upper; Chromium VI content; Abrasion resistance of lining DRY25600 WET 12800; Abrasion resistance of lining DRY51200 WET 25600;Abrasion resistance of lining DRY25600 WET 12800; Water penetration and water absorption for upper; Insole thickness; Water absorption and desorption of insole; Water absorption and desorption of insock; Outsole thickness; Tear strength of outsole; Outsole abrasion resistance; Flexing resistance of outsole; Hydrolysis of outsole; Fuel oil; Flexing resistance after fuel oil; Hot contact Method: ISO 20344 | Textile | |
| Tests for colour fastness in leather | Description: Colour fastness to migration into polymeric material Method: ISO 15701 | Textile | |
| Tests for colour fastness to drycleaning | Description: EN ISO 105 D01 Method: ISO 105 D 01, AATCC 132 | Textile | |
| Tests for colour fastness. General principles for measurement of surface colour in fabrics | Description: Chromaticity coordinates measurement Method: ISO 105-J01 | Textile | |
| Textil determinations | Description: Water Permeability of Geotextiles; and Index Puncture Resistance of Geomembranes and Related Products Method: ASTM D4833, ASTM D4491 | Textile | |
| Textil determinations. 01 | Description: Linear Density of Yarn ; Mass Per Unit Area (Weight); and Mass per Unit Area of Geotextiles Method: ASTM D5261, ASTM D3776, ASTM D1907 | Textile | |
| Textil determinations. 02 | Description: Breaking Force and Elongation Method: ASTM D5034,ASTM D5035 | Textile | |
| Textil determinations. 03 | Description: Width and length, Apparent Opening Size, and Nominal Thickness Method: ASTM D3374, ASTM D4751, ASTM D5199 | Textile | |
| Textile (parachutes) determinations | Description: Flammability Test; Trapezoid Tearing Strength of Geotextiles; Conditioning (2 days @ 21C, 65% RH); and Strap strength test Method: PIA 4108E, PIA 502, PIA 504a, ASTM D6413, ASTM D4533, ASTM D6775 | Textile | |
| Textile and leather determinations | Description: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene; detection of the use of certain azo colorants accessible with and without extracting the fibres; determination of certain aromatic amines derived from azo colorants; chemical determination of chromium(VI) content in leather; and colour fastness to cycles of to-and-fro rubbing Method: ISO 11640, ISO 17075, ISO 14362-3, ISO 14362-1,ISO 17234-1 | Textile | |
| Textile and leather determinations. 01 | Description: Determination of resistance to water penetration. Hydrostatic pressure test; determination of flex resistance; determination of pH; determination of fabric propensity to surface fuzzing and to pilling – pilling box method; calculation of colour differences; general principles for measurement of surface colour Method: ISO 105 J03, ISO 105-J01, ISO 4045, EN ISO 12945-1, ISO 5402-1, EN 20811 | Textile | |
| Textile determination Color fastness of articles for common use (with artificial saliva) | Description: Determination of the color fastness of articles for common use Part 1 test with artificial Saliva Method: DIN 53160 | Textile | |
| Textile determination, 33 | Description: Determination of mass per unit length and mass per unit area (method 5); Determination of maximum force and elongation at maximum force using the strip method; and Burning behaviour — Determination of ease of ignition of vertically oriented specimens Method: ISO 13934-1, ISO 6940, ISO 3801 | Textile | |
| Textile determination. 01 | Description: Flammability of products subjected to direct impingement of flame. single-flame Method: ISO 11925-2 | Textile | |
| Textile determination. 02 | Description: Colour fastness to spotting acid Method: ISO 105 E05 | Textile | |
| Textile determination. 03 | Description: Colour fastness to bleaching peroxide Method: ISO 105 N02 | Textile | |
| Textile determination. 04 | Description: Colour fastness to mercerizing Method: ISO 105 X04 | Textile | |
| Textile determination. 05 | Description: Colour fastness to hot water Method: ISO 105 E08 | Textile | |
| Textile determination. 06 | Description: Colour fastness to domestic and commercial laundering – Oxidative bleach (using a non-phosphate reference detergent) Method: ISO 105 C09 | Textile | |
| Textile determination. 07 | Description: Detection and determination of photochromism Method: ISO 105 B05 | Textile | |
| Textile determination. 08 | Description: Grey scale for assessing change in colour and Grey scale for assessing staining Method: EN 20105-A02, EN 20105-A03 | Textile | |
| Textile determination. 09 | Description: Colour fastness to organic solvents Method: ISO 11643 | Textile | |
| Textile determination. 10 | Description: Protective clothing protection against heat and flames limited flame spreading materials, material assemblies and clothing Method: ISO 14116 | Textile | |
| Textile determination. 11 | Description: Kawabata Evaluation System (KES). Evaluation of the touch of the Tissues. Total Hand Value (Tensile, Bending, Shear, Compression, Surface, Thickness, Weight) Method: Kawabata Evaluation System (KES) | Textile | |
| Textile determination. 12 | Description: Heat transmission on exposure to flame Method: EN 367 | Textile | |
| Textile determination. 13 | Description: Retroreflection geometry (after washing and flammability) Method: ISO 20471 | Textile | |
| Textile determination. 14 | Description: Resistance of materials to penetration by liquids Method: ISO 6530 | Textile | |
| Textile determination. 15 | Description: Crease Recovery Angle Method: ISO 2313 | Textile | |
| Textile determination. 16 | Description: Abrasion resistance Method: EN 530 | Textile | |
| Textile determination. 17 | Description: component safety determination: Pressure springs and the like; Traction Test; and Wash Test (Anexe B and C) Method: CEN/TR 16792 | Textile | |
| Textile determination. 18 | Description: Puncture resistance Method: EN 863 | Textile | |
| Textile determination. 19 | Description: Retroreflection Method: CIE 54 | Textile | |
| Textile determination. 20 | Description: Flexural damage resistance (Matia Method A), and Flexural damage resistance (Crumple/Flex Method C) Method: ISO 7854 | Textile | |
| Textile determination. 21 | Description: Abrasion resistance (martindale) Method: ISO 5470-2 | Textile | |
| Textile determination. 22 | Description: Dimensional stability to cold water immersion Method: ISO 7771 | Textile | |
| Textile determination. 23 | Description: Yarn contraction in a fabric Method: ISO 7211-3 | Textile | |
| Textile determination. 24 | Description: Flow Method: ISO 7211-1 | Textile | |
| Textile determination. 25 | Description: Oil repellency Method: ISO 14419 | Textile | |
| Textile determination. 26 | Description: Convective heat resistance Method: ISO 17493 | Textile | |
| Textile determination. 27 | Description: Average fiber diameter (projection microscope method). Method: ISO 137 | Textile | |
| Textile determination. 28 | Description: Colour fastness to water Method: ISO 11642 | Textile | |
| Textile determination. 29 | Description: Colour Fastness. Assessment Of Migration Of Textile Colours Into Polyvinyl Chloride Coatings Method: ISO 105 X10 | Textile | |
| Textile determination. 30 | Description: Resistance to abrasion with change of aspect and mass loss after abrasion Method: ASTM D3389 | Textile | |
| Textile determination. 31 | Description: Wrinkle Recovery of Woven Fabrics: Recovery Angle Method: AATCC 66 | Textile | |
| Textile determination. 32 | Description: Determination of Mass per Unit Area (Gram per square meter); Fiber Content (Polyester% & Cotton %); Threads per Unit Length (Woven fabric Construction); Determination of Dimensional stability to washing (Shrinkage); Tensile strength (Grab Method); Counts of Yarn (Woven fabric); Determination of pH of water extract from wet processed textile; and Soil Release (Oil Stain Release Method) Method: ASTM D5034, ASTM D3775, ASTM D3776, AATCC 135, AATCC 20A, AATCC 20, AATCC 130, ISO 7211-5 | Textile | |
| Textile determination. 35 | Description: Burning Flame of spread of vertically oriented specimens and Ignitability of vertically oriented specimens Method: EN 1624, EN 1625 | Textile | |
| Textile determination. 36 | Description: Test Determination of wrinkle recoverability, recovery angle, and Test color fastness to water Method: ASTM D2212, ASTM D2210 | Textile | |
| Textile determination. 37 | Description: Determination of thickness; Determination of tensile strength and percentage extension; Determination of tear load – Single edge tear; Determination of flex resistance – Flexometer method; Determination of distension and strength of surface (Ball burst method); Determination of Ph; Tests for colour fastness – Colour fastness to water; Tests for colour fastness – Colour fastness to migration into polymeric material; Determination of the abrasion resistance of fabrics by the Martindale method – Determination of specimen breakdown; Tests for colour fastness- Colour fastness to cycles of to-and-fro rubbing-Dry-Wet: Tests for colour fastness- Colour fastness to cycles of to-and-fro rubbing-Sweat: and Determination of volatile matter Method: ISO 4684, ISO 11640,ISO 12947-2, ISO 15701, ISO 4045, ISO 5402-1, ISO 3379, ISO 3376, ISO 2589, ISO 11642, ISO 11641 | Textile | |
| Textile determination. 38 | Description: Colorfastness to Chlorine Bleach, and Non-Chlorine Bleach Method: AATCC TS 001 | Textile | |
| Textile determination. 39 | Description: Stretch and Recovery Method: ASTM D3107 | Textile | |
| Textile determination. 40 | Description: Weather Resistance of Textiles (Xenon Arc Lamp Exposure) Method: AATCC 169 | Textile | |
| Textile determination. 41 | Description: Colour fastness to saliva Method: GB/T 18886 | Textile | |
| Textile determination. 42 | Description: Colour fastness to saliva Method: ISO 20701 | Textile | |
| Textile determination. 43 | Description: Colour fastness to Saliva & Perspiration Method: Oeko-Tex 201 M-9-0 | Textile | |
| Textile determination. 44 | Description: Odors determination Method: GB 18401 | Textile | |
| Textile determinations Abrasion resistance of fabrics by the martindale method | Description: Abrasion resistance of fabrics by the martindale method -Part 2 specimen breakdown; Part 3 mass loss; and Part 4 appearance change Method: ISO 12947-2, ISO 12947-3, ISO 12947-4 | Textile | |
| Textile determinations Color fastness to water | Description: Color fastness to water Method: ISO 105-E01, AATCC 107, GB/T 5713 | Textile | |
| Textile determinations Colorfastness | Description: Colorfastness to Perspiration and Light; drycleaning; heat: hot pressing; water: chlorinated pool; dye transfer in storage; fabric-to fabric; powdered non-chlorine bleach in home laundering; sodium hypchlorite bleach in home laundering; acids and alkalis; crocking. crockmeter method; perspiration; light: xenon-arc; laundering: accelerated; bleaching with hydrogen peroxide; water spotting; water sea; water; ozone in the atmosphere under low humidities; crocking: rotary vertical crockmeter; heat: dry (excluding pressing) Method: AATCC 61, AATCC 6, AATCC 116, AATCC 106, AATCC 8, AATCC 188, AATCC 15, AATCC 101, AATCC 104, AATCC 107, AATCC 109, AATCC 172, AATCC 117, AATCC 125, AATCC 132, AATCC 163, AATCC 133 | Textile | |
| Textile determinations Colour fastness to rubbing | Description: Test for colour fastness to rubbing; and color fastness to crocking Method: AATCC 8, ISO 105 X12 | Textile | |
| Textile determinations Colour Fastness; assessment of the potential to phenolic yellowing of materials | Description: Colour fastness: Part X18: assessment of the potential to phenolic yellowing of materials Method: ISO 105 X18 | Textile | |
| Textile determinations Determination of mass per unit length | Description: Determination of mass per unit length and mass per unit area; Determination of mass per unit area using small samples; and Mass per Unit area (Weight) Method: | Textile | |
| Textile determinations Dimentional changes detremination | Description: Determination of dimensional change in washing and drying; domestic washing and drying procedures ; dimentional changes of fabrics after home laundering; and dimentional changes of garments after home laundering Method: ISO 5077, ISO 6330, AATCC 135, AATCC 150 | Textile | |
| Textile determinations Fabric propensity to surface fuzzing and to pilling | Description: Fabric propensity to surface fuzzing and to pilling – Part 1: pilling box method; and Part 2: modified martindale method Method: ISO 12945-2, ISO 12945-1 | Textile | |
| Textile determinations Number of threads per unit length deteremination | Description: Number of threads per unit length; and Warp (End); and Filling (Pick) Couunt of Woven Fabrics determinations Method: ISO 7211-2, ASTM D3775 | Textile | |
| Textile determinations Quick methods for CF chlorine and Non-Chlorine Bleach | Description: Quick methods for CF chlorine and Non-Chlorine Bleach; and procedure for appearance of apparel & other textile end products after repeated home laundering Method: TS 001, TS 008 | Textile | |
| Textile determinations Smoothness appearance of fabrics after repeated home laundering | Description: Smoothness appearance of fabrics after repeated home laundering; and appearance of apparel and other textile end products after repeated home laundering Method: AATCC 124, AATCC 143 | Textile | |
| Textile determinations Spirality after laundering determination | Description: Determination of spirality after laundering (woven and knitted fabrics); determination of spirality after laundering (woven and knitted garments); and skewness change in fabric and garment twist resulting from automatic home laundering. Method: ISO 16322-2, AATCC 179, ISO 16322-3 | Textile | |
| Textile determinations Yarm | Description: Breaking force and breaking elongation of a yarn with cv determination; breaking force and breaking elongation of a yarn; twist by direct counting method; linear density- test with CV determination; and Linear density Method: ISO 2060, ISO 2062, ISO 17202 | Textile | |
| Textile determinations - Tensile strength | Description: Double tear resistance, Resistance to breaking and trapping of leather (Lastometer) Method: ASTM D2212, ASTM D2210, ASTM D2207 | Textile | |
| Textile determinations - Upholstered Furniture | Description: | Textile | |
| Textile determinations, 34 | Description: Colour fastness to mild washing and Colour fastness to machine washing Method: ISO 15702, ISO 15703 | Textile | |
| Textile determinations. 01 | Description: Liquid Moisture Management Properties Method: AATCC 195 | Textile | |
| Textile determinations. 02 | Description: Fabric propensity to surface fuzzing and to pilling. Part 3: Random tumble pilling method Method: ISO 12945-3 | Textile | |
| Textile determinations. 03 | Description: Number of threads per unit length Method: EN 1049-2 | Textile | |
| Textile determinations. 04 | Description: Ligament Method: UNE 40161 | Textile | |
| Textile determinations. 05 | Description: Number of stitches per unit length and unit area Method: EN 14971 | Textile | |
| Textile determinations. 06 | Description: Burning behavior. Flame spread of vertically oriented specimens Method: EN 1102 | Textile | |
| Textile determinations. 07 | Description: Colour fastness to organic solvents; Colour fastness to hot pressing; Colour fastness. Assessment of the potential to phenolic yellowing of materials; Colour fastness to washing with soap or soap and soda; and Colour fastness to bleaching: Hypochlorite Method: ISO 105 N01, ISO 105 C10, ISO 105 X18, ISO 105 X11, ISO 105 X05 | Textile | |
| Textile determinations. 08 | Description: Determination of twist in single spun yarns Untwist/retwist method; Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change; Determination of width and length; Determination of the fabric propensity to surface pilling, fuzzing or matting; and Methods for the presentation of a weave diagram and plans for drafting, denting and lifting Method: ISO 7211-1, ISO 22198, ISO 3759, ISO 12945-3, ISO 17202 | Textile | |
| Textile determinations. 09 | Description: Determination of the recovery from creasing of a horizontally folded specimen of fabric by measuring the angle of recovery; Hydraulic method for determination of bursting strength and bursting distension; Determination of spirality after laundering. Woven and knitted fabrics; Determination of spirality after laundering. Woven and knitted garments; Determination of the abrasion resistance of fabrics by the Martindale method. Determination of mass loss; and Determination of the abrasion resistance of fabrics by the Martindale method. Assessment of appearance change. Method: ISO 12947-4, ISO 12947-3, ISO 16322-3, ISO 16322-2, ISO 13938-1, ISO 2313 | Textile | |
| Textile determinations. 10 | Description: Technical requirements for determining a sharp point in toys and other articles intended for use by children under 8 years of age; Technical requirements for determining a sharp metal or glass edge in toys and other articles intended for use by children under 8 years of age; Flammability of clothing textiles; Convective heat resistance using a hot air circulating oven; and Abrasion resistance of protective clothing material Method: EN 530, ISO 17493, 16 CFR 1610, 16 CFR 1500.49, 16 CFR 1500.48 | Textile | |
| Textile determinations. 11 | Description: testing performance when cleaning and finishing using tetrachloroethene; Determination of linear density of yarn removed from fabric; Determination of tear resistance. Constant rate of tear methods; and Determination of tear resistance. Ballistic pendulum method Method: ISO 4674-2, ISO 4674-1, ISO 7211-5, ISO 3175-2 | Textile | |
| Textile determinations. 12 | Description: Puncture resistance; Burning behavior. Determination of ease of ignition of vertically oriented specimens; Burning behavior. Measurement of flame spread properties of vertically oriented specimens; Maximum force to seam rupture using the grab method; and Oil repellency. Hydrocarbon resistance test Method: ISO 14419,ISO 13935-2, ISO 6941, ISO 6940, EN 863 | Textile | |
| Textile determinations. 13 | Description: Contact heat produced by heating cylinder; Retroreflection; Heat transmission on exposure to flame; Resistance to damage by flexing; Recommendations for the design and manufacture of children’s clothing – Mechanical safety; Measurement of the electrical resistance through a material (vertical resistance); and Abrasion resistance. Martindale abrader Method: ISO 5470-2,EN 1149-2, CEN/TR 16792, ISO 7854, ISO 9151, ISO 12127, CIE 54.2 | Textile | |
| Textile determinations. 14 | Description: Determination of linear density of yarn removed from fabric; and Determination of number of threads per unit length Method: ISO 7211-2, ISO 7211-5 | Textile | |
| Textile determinations. 15 | Description: Branched textile hydrophilicity Method: EN 14697 | Textile | |
| Textile determinations. 16 | Description: Colour fastness to water; Colour fastness to perspiration; Colour fastness to rubbing; Assessment of the potential to phenolic yellowing of materials, and Colour fastness to artificial light (Method 3) Method: ISO 105-B02, ISO 105 X18, ISO 105 X12, ISO 105 E04, ISO 105-E01 | Textile | |
| Textile determinations. 17 | Description: Thickness; Sole Adhesion test; and Lace Abrasion test Method: ISO 22774, ASTM D1777, SATRA TM404 | Textile | |
| Textile determinations. 18 | Description: Tear Strength (Upper); Water Resistance (Outsole); and Accessories Corrosion Method: ISO 17696, ISO 5404, ISO 22775 | Textile | |
| Textile determinations. 19 | Description: Slip Resistance; Flex Resistance (Outsole); and Abrasion Resistance (Outsole) Method: ISO 17707, ISO 13287, ISO 20871 | Textile | |
| Textile determinations. 20 | Description: Dimensional stability to dry cleaning; and Aspect evaluation after dry cleaning. Method: ISO 3175-2 | Textile | |
| Textile determinations. 21 | Description: Dimensional stability to Cold Water Immersion Method: ISO 6925 | Textile | |
| Textile determinations. 22 | Description: Textile Floor Covering-Burning Behavior (Tablet Test Method) Method: ISO 6925 | Textile | |
| Textile determinations. 23 | Description: Color Fastness to Rubbing: Organic Solvents Method: ISO 105 D02 | Textile | |
| Textile determinations. 24 | Description: Determination of Air Permeability Method: ASTM D737 | Textile | |
| Textile determinations. 25 | Description: Determination of Thickness. Method: ASTM D1777 | Textile | |
| Textile determinations. 26 | Description: Determination of number of wales and courses. Method: ASTM D3887 | Textile | |
| Textile determinations. 27 | Description: Water Resistance: Rain Test; Water Repellency: Spray Test; Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus; Breaking Strength and Elongation of Textile Fabrics (Grab Test); Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method); Mass Per Unit Area (Weight) of Fabric; and Fiber Analysis: Qualitative Method: AATCC 20,AATCC 22, ASTM D1424, ASTM D5034, ASTM D4966, ASTM D3776, AATCC 35 | Textile | |
| Textile determinations. 28 | Description: Flammability of textile fabrics when subjected to a small igniting flame applied to the face or bottom edge of vertically oriented specimens, Burning Behaviour – 45° Test – Determination of Flame Spread Rate, Determination of the abrasion resistance of fabrics by the Martindale method, Determination of mass loss, Determination of number of stitches per unit length and unit area, Cleansing and wetting procedures for use in the assessment of the effect of cleansing and wetting on the flammability of textile and fabric assemblies, and Flammability of childrens sleepwear Method: 16 CFR 1616, ISO 12947-3, 16 CFR 1615, BS 5651, EN 14971, GB/T 14644, BS 5438 | Textile | |
| Textile determinations. 29 | Description: Linear density; Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator; Colour fastness to hot pressing; and Breaking force and breaking elongation of a yarn Method: ISO 105 C08, ISO 105 X11, ISO 2062, ISO 2060 | Textile | |
| Textile determinations. 30 | Description: DMFa; Glycols; and Chlorinated organic carriers (COC) Method: DIN 54232, ISO 16186 | Textile | |
| Textile determinations. 31 | Description: Number of threads per unit length; Dimensional change in wash and drying; Tear force of wing-shaped test specimen; Maximum force using the strip method; Oil repellency; Colour fastness to dry cleaning; Colour fastness to organic solvents; Quantitative analysis; Recovery form creasing of a horizontally folded specimen by measuring the angle of recovery; and Linear density Method: ISO 7211-5, ISO 1833-3, ISO 1833-11, ISO 1833-1, ISO 1833-2, ISO 14419, ISO 1833-7, ISO 13934-1, ISO 13937-3, ISO 13937-1, ISO 6330, ISO 105 X05, ISO 105 D01, EN 1049-2, EN 22313 | Textile | |
| Textile determinations. 32 | Description: Yarn number based on short-Length specimens; and Number of filaments on yarn or woven Method: ASTM D1059 | Textile | |
| Textile determinations. 33 | Description: Fiber analysis; Colorfastness assessment; pH Content; GSM; Tensile strength – strip method; Tensile strength – grab method; Bursting strength – Diaphragm Bursting Strength Tester Method; and Bursting strength – (CRT) Ball Burst Test Method: ASTM D3786, ISO 3801, ISO 3071, ISO 1833-1, AATCC 20, AATCC 1, ASTM D3787, ASTM D5034, ISO 13934-1 | Textile | |
| Textile determinations. 34 | Description: Tensile strength; Water penetration (Hydrostatic Pressure); Previous treatment – Washing and drying domestic (Flammability); Flammability- Checking Capability; Fiber Composition- up to 2 fibers; and Symbology of labeling conservation Method: ISO 1833-1, ISO 6330, ISO 811, ISO 3758, ISO 13934-1, ISO 12952-1 | Textile | |
| Textile determinations. 35 | Description: Previous treatment -Washing and drying domestic; Fire behavior; Flammability of floor coverings textile (textile methenamine) Method: 16 CFR 1615, 16 CFR 1630, 16 CFR 1631, 16 CFR 1616, AATCC 124 | Textile | |
| Textile determinations. 36 | Description: Previous treatment -Washing and drying domestic; Assessment of the ignitability of bedding items; Ignition source: smouldering cigarette; Assessment of the ignitability of bedding items; Ignition source: match-flame equivalent; Flammability of Blankets; Testing the Smolder Resistance of Materials Used in Upholstered Furniture Method: ISO 12952-1, California Technical Bulletin 117, ISO 12952-2, ASTM D4151, ISO 6330 | Textile | |
| Textile determinations. 37 | Description: Method for determination of number of thread; Standard test method for pilling; Determination of tuft withdrawal force; Determination of abrasion resistance (Taber abrader); and Colour fastness to hot pressing Method: ISO 105 X11, ISO 7211-2, ISO 5470-1, ISO 4919, ASTM D3512, SASO 2654 | Textile | |
| Textile determinations. 38 | Description: Determination of certain flame retardants (Brominated flame retardants and Phosphorus flame retardants) Method: ISO 17881-1, ISO 17881-2 | Textile | |
| Textile determinations. 39 | Description: Test for Colour Fastness to Perspiration; and Color fastness to Perspiration Method: AATCC 15, ISO 105 E04 | Textile | |
| Textile determinations. 40 | Description: Resistance to Slippage of Yarns Method: ASTM D434 | Textile | |
| Textile determinations. 41 | Description: Fiber composition Method: ISO 1833-4 | Textile | |
| Textile determinations. 42 | Description: Organic fluorine — Part 1: Determination of the non-volatile compound content (PFAS); Determination of chlorinated hydrocarbons in leather (SCCP + MCCP + LCCP); and Determination of halogenated compounds – flame retardants Method: | Textile | |
| Textile determinations. 43 | Description: Determination of mass per unit area; Determination of dimensional change in washing and drying; Qualitative and quantitative analysis of fibers; Determination of linear density (mass per unit length); Colour fastness to domestic and commercial laundering; Colour fastness to hot pressing; Determination of single-end breaking force and elongation at break; Colour fastness to domestic and commercial laundering; and Colour fastness to perspiration Method: ISO 105 E04, ISO 105-C06, ISO 2060, ISO 2062, ISO 105 X11, ISO 1833-1, ISO 12127, ISO 5077, ISO 105 C08 | Textile | |
| Textile determinations. 44 | Description: Formaldehyde; pH; and Wing Tear Method: SO 14184-1, ISO 13937-3, ISO 3071 | Textile | |
| Textile determinations. 45 | Description: Determination of mass per unit length and mass per unit area; Determination of the tendency to the formation of fluff and pellets. Modified Martindale method; Fastness tests. Part E04: Color fastness to perspiration; and Determining the dimensional variations in the washing and drying Method: ISO 12945-2, ISO 3801, ISO 5077, ISO 105 E04 | Textile | |
| Textile determinations. 46 | Description: Certain azo colorants in dyed leathers; Content of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers, and pentachlorophenol, its salts, and esters in leather; Phthalates in footwear materials; Quantitatively determine dimethyl fumarate (DMFU); Determination of organotin compounds; Chemical determination of metal content; and Determination of pH Method: ISO 17234-1, ISO 16179, ISO 17070, ISO/TS 16181, ISO 16186, ISO 17072-1, ISO 4045 | Textile | |
| Textile determinations. 47 | Description: Mass per unit area; and Quantitative Analysis of Textiles Method: ASTM D629, ASTM D3776 | Textile | |
| Textile determinations. 48 | Description: Tear strength determinations; Breaking strength and elongation determinations; Resistance pilling; Flame resistance; and Water penetration Method: ASTM D5034, ASTM D3512,ASTM D6413,ASTM D1424, AATCC 127 | Textile | |
| Textile determinations. 49 | Description: Determination of the number of warp yarns and number of weft yarns; and Determination of the mass per unit area Method: ASTM D3775, ASTM D3776 | Textile | |
| Textile determinations. 50 | Description: Determination of fabric propensity to surface fuzzing and to pilling – Part 2: Modified Martindale method; Light fastness; Wrinkle recovery; Spray test; Determination of formaldehyde; and Chromaticity coordinates Method: ISO 105-J01, ISO 14184-1, AATCC 22, AATCC 128, ISO 105-B02, ISO 12945-2 | Textile | |
| Textile determinations. 51 | Description: Determination of maximum force and elongation at maximum force using the strip method; Determination of tearing strength; Determinations of colour fastness to perspiration; Color fastness to washing; Colour fastness to hot pressing; colour fastness to rubbing; Determination of dimensional change in washing and drying; Determination of mass per unit area using small samples; Quantitative chemical analysis; and Quantitative chemical analysis Part 11: Mixtures of cellulose and polyester fibres (method using sulfuric acid) Method: ISO 105-C06, ISO 105 E04, ISO 13937-1, ISO 13934-1, ISO 105 X11, ISO 105 X12, ISO 1833-11, ISO 1833-1, ISO 12127, ISO 5077 | Textile | |
| Textile determinations. 52 | Description: Determination of resistance to surface wetting (spray test); Determination of the permeability of fabrics to air; and Determination of width and length Method: ISO 4920, EN 1773, ISO 9237 | Textile | |
| Textile determinations. 53 | Description: Abrasion Test (Martindale): Colour fastness determinations in textile; Determination of mass per unit length and mass per unit area; Determination of formaldehyde in textiles; Determination of fabric propensity to surface fuzzing and to pilling Modified Martindale method; Dimensional change after washing cloth home; Color fastness to washing; Heavy metals; Disperse dyes; Organo tins; Pthalates in polymers; Materials and articles in contact with foodstuffs; and Cadmium determination Method: EN 1122, ISO 12945-2, ISO 105-C06, DIN 53316, ISO 14184-1, VDA 275, ISO 17353, ISO 105 E04, EN 1186, AATCC 135, CPSC-CH-C1001-09, ASTM D3465, ISO 3801, ISO 105 X11, EN 13520, ISO 105 X12 | Textile | |
| Textile determinations. 54 | Description: Determination of tear force of trouser-shaped test specimens – Single Tear Method; Hydraulic method for determination of bursting strength and bursting distension; Bursting Strength of TextilesConstant-Rate-of-Traverse (CRT) Ball Burst Test; Determination of maximum force to seam rupture using the grab method; Determination of dimensional change in washing and drying; Flame Resistance of Textiles (Vertical Test); Determination of heat transmission on exposure to flame; Determination of contact heat transmission through protective clothing or constituent materials; Unsteady-state heat transfer evaluation of flame resistant materials for clothing with continuous heating; and Toys – specification for migration of certain elements Method: ASTM D6413, ASTM F2700, ISO 12127, ISO 9151, ISO 15025, ISO 5077, ISO 13938-1, ISO 13935-2, ASTM D3787, ISO 13937-2 | Textile | |
| Textile determinations. 55 | Description: Number of threads per unit length; determination of tear force of trouser-shaped test specimens; oil repellency-Hydrocarbon resistance test; determination of pH; determination of the slippage resistance of yarns at a seam in woven fabrics Method: ISO 3071, ISO 14419, ISO 13937-2, ISO 13936-1, EN 1049-2 | Textile | |
| Textile determinations. 56 | Description: Determination of maximum force and elongation at maximum force using the strip method; colour fastness to domestic and commercial laundering; colour fastness to artificial light: Xenon arc fading lamp test; determination of the abrasion resistance of fabrics by the martindale method; determination of fabric propensity to surface fuzzing and to pilling — Part 2: modified martindale method; determination of mass per unit area using small samples Method: ISO 12127, ISO 12945-2, ISO 12947-2, ISO 105-B02, ISO 105-C06, ISO 13934-1 | Textile | |
| Textile determinations. 57 | Description: Determination of maximum force using the grab method; colour fastness to sea water; determination of dimensional change in washing and drying; domestic washing and drying procedures for textile testing; colour fastness to chlorinated water (swimming-pool water) Method: ISO 105-E03, ISO 6330, ISO 5077, ISO 105-E02, ISO 13934-2 | Textile | |
| Textile determinations. 58 | Description: Determinations of colour fastness to perspiration; test for colour fastness to rubbing; colour fastness to water; and determination of fabric propensity to surface fuzzing and pilling Method: ISO 12945-1, ISO 105-E01, ISO 105 E04, ISO 105 X12 | Textile | |
| Textile determinations. 59 | Description: Colour fastness to dye transfer; fabric weight; appearance after domestic washing & drying; and colour fastness to artificial sweat Method: ISO 16322-3, ISO 16322-2, ISO 16322-1, ISO 12127, AATCC 163, DIN 53160 | Textile | |
| Textile determinations. 60 | Description: Bursting and Determination of abrasion resistance (Taber abrader) Method: ISO 13938-2, ISO 5470-1 | Textile | |
| Textile determinations. 61 | Description: Burning behavior: Determination of the ease of ignition; exposure to radiant heat; and determination of material behavior on the impact of small molten metal spatter Method: ISO 6940, ISO 6942, ISO 9150 | Textile | |
| Textile determinations. 62 | Description: Type of ligament; linear density; mass per unit area; pilling resistance; and tear resistance Method: ASTM D1424,ISO 7211-5, ISO 12945-1, ASTM D3776, ISO 7211-1 | Textile | |
| Textile determinations. 63 | Description: Burning behaviour; and Surface flammability of carpets and rugs Method: 16 CFR 1615, 16 CFR 1610, ISO 15025, 16 CFR 1616, 16 CFR 1630, 16 CFR 1631, EN 1102 | Textile | |
| Textile determinations. 64 | Description: Washing/drying cycle; strength of dyes to sweat; and color fastness to light Method: ISO 105 E04ISO 105-B02, ISO 6330, ISO 7768, | Textile | |
| Textile determinations. 65 | Description: Calculation of colour differences: colour fastness to spotting: Water; fire behavior; and Colour fastness to washing with soap or soap and soda Method: 16 CFR 1610, ISO 105 C10, ISO 105 E07,ISO 105 J03 | Textile | |
| Textile determinations. 66 | Description: Tearing strength; pilling resistance; width of textile fabric; end (warp) and pick (filling) count of woven fabrics; mass per unit area (weight); bursting strength; and abrasion resistance Method: ASTM D4966, ASTM D2261, ASTM D3776, ASTM D3775, ASTM D3774, ASTM D3512, ASTM D3786 | Textile | |
| Textile determinations. 67 | Description: Colorfastness to crocking; to laundering; to light: xenon-arc; fiber analysis: quantitative; smoothness appearance of fabrics after repeated home laundering; and dimensional changes of fabrics after home laundering Method: AATCC 135, AATCC 124, AATCC 20A, AATCC 61, AATCC 16, AATCC 8 | Textile | |
| Textile determinations. 68 | Description: Dimethyl fumarate; residues of solvents; and generic determination of smells Method: ISO/TS 16189, ISO 16186, GB 18401 | Textile | |
| Textile determinations. 69 | Description: Small parts; Use & abuse test; Sharp points; Sharp edges; Colour fastness to hot pressing; and Dimensional change after washing cloth home Method: 16 CFR 1500.48, 16 CFR 1500.49, 16 CFR 1500.51, 16 CFR 1500.52, 16 CFR 1500.53, 16 CFR Part 1501, AATCC 135, ISO 105 X11 | Textile | |
| Textile determinations. 70 | Description: Weight Thickness Tension Dynamic elongation Tear resistance (long and transv) Tear resistance per stitch Smoothness Bending length Chemical resistance (veslic dry 20c) Flamability Elongation under constant load Adherence Abrasion resistance Method: ISO 11644, ISO 11640, ISO 17235, ISO 3795, ASTM D3776, ISO 3377-1, ASTM D2261, ISO 13934-1, ASTM D5034, ISO 3376, ASTM D1813, ASTM D2208, ASTM D2211, ASTM D5587, ISO 23910, BN-157-01, BN 157-02, BN 107-01, SAE J855 | Textile | |
| Textile determinations. 71 | Description: Determination of maximum force to seam rupture using the strip method Method: ISO 13935-1 | Textile | |
| Textile determinations. 72 | Description: Determination of mass per unit area; and Determination of thickness Method: ISO 9073-1, ISO 9073-2 | Textile | |
| Textile determinations. 73 | Description: Determination of tensile strength and elongation; Determination of breaking strength and elongation of nonwoven materials using the grab tensile test; and Determination of tear resistance Method: ISO 9073-4, ISO 9073-3, ISO 9073-18 | Textile | |
| Textile determinations. 74 | Description: Tensile strength and elongation; and Slippage of standard seam Method: NBR 13041, NBR 9925, ISO 9073-3 | Textile | |
| Textile determinations. 75 | Description: Determination of breaking strenght and elongation (strip); Nonwoven – Determination of tensile strength and elongation; Determination of slippage of a standard seam; and Determination of density yarn Method: NBR 11912, NBR 10588, NBR 9925, NBR 13041 | Textile | |
| Textile determinations. 76 | Description: M.D abrasion; Vamp flexing; Toe post Strength; Attachment Strength of Strap; and Heel fatigue Method: SATRA TM31, SATRA TM118, SATRA TM120, SATRA TM25, SATRA TM21 | Textile | |
| Textile determinations. 77 | Description: Determination of metals using microwave digestion – Heavy Metals (As, Cd, Co, Cr, Cu, Hg, Ni, Pb, Sb); Determination of metals extracted by acidic artificial perspiration solution – Heavy Metals (As, Cd, Co, Cr, Cu, Hg, Ni, Pb, Sb); Detection of the use of certain azo colorants accessible with and without extracting the fibers; Detection of the use of certain azo colorants, which may release 4-aminoazobenzene); and Phthalates Method: ISO 14362-1, ISO 14362-3, EN 16711-1, EN 16711-2, EN 15777 | Textile | |
| Textile determinations. 78 | Description: Determination of the number of threads per unit length of warp and weft of flat fabrics; Determination of the repellency of fabrics to water (Spray test); Instrumental measurement of color in textiles; Quantitative analysis of textile fibers; Qualitative analysis of textile fibers; Determination of the pH of the aqueous extract of wet processed textiles; Dimensional change in clothes by washing in automatic machine for domestic use; and Dimensional change in fabrics after washing in a domestic machine. Method: AATCC 135, NTC 2308, AATCC 150, AATCC 81, AATCC 20, ASTM D629, AATCC 22, NTC 5495, NTC 481-3, NTC 908, NTC 1213, NTC 0151, NTC 427, ASTM D3775 | Textile | |
| Textile determinations. 79 | Description: Tear resistance; Color fastness to perchlorethylene determination; Recouvery from creasing of a horizontally folded specimen by measuring the angle of recouvery; Density of yarns; Methods for the presentation of a weave diagram and plans for drafting, denting and lifting; and Oil repelances Method: EN ISO 13937-3, ISO 13937-2, ISO 105 D01, ISO 7211-5, ISO 7211-1, ISO 14419, ISO 22313 | Textile | |
| Textile determinations. 80 | Description: Grammage; dimension; and pH Method: ISO 3801, ISO 3071, ISO 22198 | Textile | |
| Textile determinations. 81 | Description: Wrinkle Recovery of Fabrics: Appearance Method; Maximum force to seam rupture using the grab method; Hydraulic method for determination of bursting strength and bursting distension; Pneumatic method for determination of bursting strength and bursting distension; Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine); Basic ligaments of woven fabrics; and Determination of the width of tissue of nonwovens and fabrics Method: AATCC 128, ISO 13935-2, ISO 13938-1, ISO 13938-2, ASTM D2261, NBR 12546, ISO 3572, NBR 10589, ISO 22198 | Textile | |
| Textile determinations. 82 | Description: Colour fastness to artificial light: Xenon arc fading lamp test; Colorfastness to Crocking Testing; Colorfastness to Perspiration Testing; Colorfastness to Laundering Testing; Colorfastness to Sea Water Testing; and Fiber Analysis: Qualitative and Quantitative Method: AATCC 106, AATCC 61, AATCC 15, AATCC 8, ISO 105-B02, AATCC 20A, AATCC 20 | Textile | |
| Textile determinations. 83 | Description: Light fastness; color fastness to rubbing; and mass per unit area (weight) Method: ISO 105-B02, ISO 105 X12, ASTM D3776 | Textile | |
| Textile floor coverings determination | Description: Determination of thickness loss under dynamic loading Method: ISO 2094 | Textile | |
| Thickness determination for leather sample. | Description: Thickness Method: ISO 2589 | Textile | |
| Trapezoidal tear resistance | Description: Method: ASTM D4533 | Textile | |
| Twsit in single yarns. | Description: Twisting and untwisting method. Method: NTC 443 | Textile | |
| Ultraviolet protection factor determination | Description: AATCC 183 Method: AATCC 183 | Textile | |
| Unsteady-State Heat Transfer Evaluation of Flame Resistant Materials for Clothing with Continuous Heating | Description: Method: ASTM F2700 | Textile | |
| Upper flexing resistance in footwear | Description: Method: EN 13512 | Textile | |
| Water penetration test | Description: Method: AATCC 127 | Textile | |
| Water Repellency: Spray Test | Description: AATCC 22 Method: AATCC 22 | Textile | |
| Water vapour permeability and chrome content in leather | Description: Water vapour permeability; and Chrome content. Method: ISO 5398, ISO 14268 | Textile | |
| Weaves determinations | Description: Method: ISO 3572 | Textile | |
| Weight and Fabric Frame Base Plans determinations | Description: Weight and weave classification. Method: NBR 10591, NBR 12546 | Textile | |
| Wet blue determinations (leather) | Description: Chrome content; pH; TCMTB content; and Moisture Method: ISO 5398, ASTM D6657, ISO 13365, ASTM D6658 | Textile | |
| Whiteness in textile | Description: Method: AATCC 110 | Textile | |
| Width and length determination in Textile | Description: Method: ISO 22198 | Textile | |
| Wrinkle Recovery of Fabrics | Description: Appearance Method Method: AATCC 128 | Textile | |
| Yarn. Determination of Twist in Yarns. | Description: Direct Couting Method. Method: NTC 752 | Textile | |
close
