Select the program you want to quote. You can select different programs and they will be added in the lower floating button. When you finish choosing you can go to quote them.

ILT-U-896Acidity by measuring PH and conductivity in cable determination
Acidity by measuring PH and conductivity
ILT-U-2166Acoustic determinations. 1A

Description: Evaluation of the sound pressure level emitted Method: ISO 11201

ILT-U-2165Acoustic determinations. 1B

Description: Evaluation of the power level emitted Method: ISO 3744

ILT-U-1964Acoustic testing class

Description: Acoustic testing class, in the NOISE SEAL test. Portaria n.º 430, de 16 de agosto de 2012 Method:

ILT-U-1406ADSL Filter determination

Description: Method: ETSI TS 101 952-3

ILT-U-1209ADSL Modem determination

Description: Method: ETSI ES 202 913

ILT-U-1666Aging panels determinations

Description: Aging panels (120 hours) Method: CIE 121, CIE 63, CIE 84

ILT-U-2410Air conditioner determinations

All determinations. According to IEC 60335-2-40

ILT-U-1207Analog telephone determination

Description: Method: ETSI ES 203-021

ILT-U-1787Appliance determinations

Description: Appliances for skin or hair care Method: IEC 60335-2-23

ILT-U-1591Audio/video, information and communication technology equipment

Description: Safety requirements Method: IEC 62368-1

ILT-U-1466Automatic electrical control

Description: Method: IEC 60730-1

ILT-U-1170Ball pressure test

Description: Method: IEC 60695-10-2

ILT-U-117Batteries determinations

Description: LR6-2 – Portable lighting LED R6P-2 – Portable lighting LED Method: IEC 60086-2

ILT-U-1697Battery chargers determinations

Description: Battery chargers Method: IEC 60335-2-29

ILT-U-310Cable determination

Description: Clause 3.5.1. Method: UL 2556

ILT-U-2591Cable determination

Insulation resistance at ambient temperature and at maximum conductor temperature. According to IEC 60502-1

ILT-U-2594Cable determination


Direct current resistance of 1 km conductor at 20 ̊ C, Average thickness of sheath & insulation (PVC & XLPE), and Tensile & Elongation of insulation & sheath (PVC & XLPE). According to IEC 60502-1

Standard :[:en]CEI 60502 [:],

ILT-U-2775Cable determination


Physical properties of conductors  (Tensile strength, elongation at break and ultimate strength). Accroding to UL 2556 and NTC 5786 Clause 3.5.1

Standard :NTC 5786, UL 2556,

ILT-U-2770Cable determination


DC current resistance of the conductor. Accroding to UL 2556 and NTC 5786 Clause 3.4

Standard :NTC 5786, UL 2556,

ILT-U-2772Cable determination


Insulation resistance in water (Short term insulation resistance). According to UL 2556 Clause and NTC 5786 Clause

Standard :NTC 5786, UL 2556,

ILT-U-2773Cable determination


Conductor cross-sectional area by weight method. Thickness. According to UL 2556 Clause 3.2, 4.1 and NTC 5786 Clause 3.2, 4.1

Standard :NTC 5786, ASTM D2556,

ILT-U-2774Cable determination


Cross-sectional area. According to UL 2556 and NTC 5786

Standard :

ILT-U-2825Cable determination


Burning particles (dropping). According to UL 2556 Clause 9.2

Standard :UL 2556,

ILT-U-2826Cable determination


Vertical tray flame tests (Method 1 Vertical tray and Method 2 FT4). According to UL 2556 Clause 9.6

Standard :UL 2556,

ILT-U-2860Cable determination


Fire Testing. According to UL 2556 FV-1, FV-2, and VW-1

Standard :UL 2556,

ILT-U-3200Cable determination


Physical Tests (ultimate elongation and tensile strength). According to UL 2556

Standard :UL 2556

ILT-U-290Cable determinations

Description: Clause 9.1, 9.3, 9.4 and 9.5 Method: UL 2556

ILT-U-2405Cable determinations

Cross-sectional area of electrical conductors as a function of their mass, Analysis for electrical conductors. According to UL 2556 and NTC 5786

ILT-U-457Calibration of electrical magnitudes

Description: Voltage (DC); Voltage (AC @ 50 Hz); Current (DC); Current (AC @ 50 Hz); Frecuency; and Resistance Method:

ILT-U-2050Calibration of electrical safety tester

Description: Calibration, Insulation resistance DC. Calibration, Ground bond test. Method:

ILT-U-1562Climatic test. 1A

Description: *85°C / 85% UR; 168 hs; 1 cycles Method: IEC 60068-2-67

ILT-U-1560Climatic test. 1B

Description: *0°C / T max °C; 1 hs; 10 cycle (ISO 16750-4 chapter 5.4.3) Method: ISO 16750-4

ILT-U-1559Climatic test. 1C

Description: *20°C / -40°C / 140°C; 5 hs; 1 cycle (ISO 16750-4 chapter 5.2) Method: ISO 16750-4

ILT-U-1557Climatic test. 1D

Description: 55°C / -10°C / 25°C; 20 / 65 / 80 / 96 %UR; 24 hs; 11 cycles Method: IEC 60068-2-38

ILT-U-3253Commercial beverage coolers determination


Classification, requirements and test conditions. According to ISO 22044

Standard :ISO 22044

ILT-U-2469Conducted Emission determinations

Conducted Emission test. According to CISPR 15

ILT-U-1801Conducted Emission tests

Description: Conducted Emission tests Method: CISPR 32, EN 55032

ILT-U-830Content of acid halogens in cables determination

Content of acid halogens in cables

ILT-U-2489Corrosion resistance determination

Corrosion resistance in socket. According to  NTC 1650

ILT-U-2771DC current resistance of the conductor


Dielectrics withstand voltage of coils and spools in water. According to UL 2556 and NTC 5786 6.2,,

Standard :NTC 5786, UL 2556,

ILT-U-1896Degrees of Protection IK

Description: Led luminaires Method: IEC 62262

ILT-S-05Degrees of protection provided by enclosures (IP Code)

Description: Method: IEC 60529

, ILT-U-3056Determinaciones en salto de frecuencia


Testing of frequency hopping system equipment. According to ENACOM Test Protocol for Frequency Hopping Systems V20.1

Standard :

ILT-U-796Determination of airborne acoustical noise

Description: Vacuum cleaners Method: IEC 60704-2-1

ILT-U-185Determination of electrical safety test. 1A

Description: Marking & instructions; Protection against access to live parts; Power input & current; Leakage current & Electric Strength; Provision for earthing; and Screws & Connections Method: IEC 60335-1, IEC 60335-2-3

ILT-U-129Determination of electrical safety test. 1C

Description: All test Method: IEC 60335-1

ILT-U-128Determination of environmental test

Description: IEC 60335-1 and IEC 60950-1 Method: IEC 60335-1, IEC 60950-1

ILT-U-961Determination of Ohmic resistance cables. 1A

Description: Method: IEC 60228

ILT-U-060Determination of Ohmic resistance cables. 1B

Description: IEC 60227 section 2.1 Method: IEC 60227

ILT-U-851Determination of the electrical resistance, dielectric strength and stress and elongation Effort electrical conductors

Description: Determination of the electrical resistance to DC, Determination of effort and mechanical stress elongations of the wires, and Dielectric strength (high voltage) Method: NMX-J-212, NMX-J-312, NMX-J-293

ILT-U-277Determination of the power and earthing

Description: IEC 60065 Method: IEC 60065

ILT-U-180Determination of thickness of insulation covered and electrical conductors

Description: IEC 60811-1-1-2001 clause 8.1 – IEC 60811-201-2012 and IEC 60811-1-1-2001 clause 8.2 – IEC 60811-202-2012 Method: IEC 60811-1-1, IEC 60811-201, IEC 60811-202

, ILT-U-3286Determinations for certain substances, in electrotechnical products


Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatography-mass spectrometry (GC-MS), and Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS), gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption accessory (Py/TD-GC-MS). According to IEC 62321-6 and IEC 62321-8

Standard :IEC 62321-6, EN 62321-6, IEC 62321-8, EN 62321-8

, ILT-U-3287Determinations for certain substances, in electrotechnical products


Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS; Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS. According to IEC 62321-4 and IEC 62321-5

Standard :IEC 62321-5, EN 62321-5, IEC 62321-4, EN 62321-4

ILT-U-034Determinations for IT equipment

Description: IEC 60950-1 Method: IEC 60950-1

ILT-U-1471Determinations in cell phones

Description: SAR Test; and TS 51.010-1 V6.5.0 test in 3GPP. According to Resolução nº 533 – Agência Nacional De Telecomunicações Method:

ILT-U-191Determinations in Power cables with extruded insulation and their accessories for rated voltages

Description: Cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV) Method: IEC 60502-2

ILT-U-1477Determinations in PVC and XLPE cables

Description: Measurement of insulation thickness; Measurement of thickness of non-metallic sheath (insulation covered and electrical conductors; Measurement of overall dimensions; Insulation resistance measurement; Water absorption test – electrical method; Loss of mass test; and Thermal ageing of insulation and sheath Method: IEC 60811-201, IEC 60811-202, EN 60811-203, CEI 60502, EN 60811-401, EN 60811-402, EN 60811-409

ILT-U-1478Determinations in PVC cables

Description: Thermal shock test on insulation and sheath; Pressure test on insulation and sheath; Impact test at low temperature on insulations and sheaths; and Coiling test at low temperature on insulations and sheaths Method: EN 60811-504, EN 60811-506, EN 60811-508, EN 60811-509

ILT-U-1479Determinations in XLPE cables

Description: Heat shrinking of insulation and sheath; and Hot set test on insulation Method: EN 60811-502, EN 60811-503, EN 60811-507

ILT-U-1052Determining the density

Description: Pycnometer method Method: IEC 60811-606

ILT-U-540Dielectric Constant, Electrical Resistance, DC Resistance & Conductance

Description: Method: ASTM D991, ASTM D257, ASTM D150

ILT-U-539Dielectric strength and leakage current

Description: Method: CSA 195, CSA 109

ILT-U-1094Dielectric strength Test

Description: Dielectric strength Test Method: IEC 60335-1

ILT-U-119Dielectric test and Temperature rise test

Description: IEC 60439-1 Method: IEC 60439-1

ILT-U-1864Digital Cameras – Noise measurements

Description: Detailed noise; and the signal to noise value for different grey levels Method: ISO 15739

ILT-U-1855Digital Cameras – OECF measurement

Description: Maximum contrast; Gamma; The signal to noise value for different grey levels; and ISO speed of the camera Method: ISO 14524

ILT-U-2409Dimensional analysis for EMT pipe

Dimensional analysis for EMT pipe. According to UL 797, NTC 105

ILT-U-2408Dimensional analysis for Pass Boxes

Dimensional analysis for Pass Boxes. According to NTC 2958 Clause 5.1

ILT-U-2560Dimensional determinations in electrical products

Dimensional determinations in plug (3 round legs) for home use

ILT-U-1995Domestic cooking appliances burning gas determinations

Description: Combustion and Consumption Method: EN 30-1-1

ILT-U-2295Electric and optical fibre cables determinations. Elongation at low temperature for insulations and sheaths

Standard :IEC 60811-505

ILT-U-2298Electric and optical fibre cables determinations. Measurement of carbon black and/or mineral filler in polyethylene compounds

Standard :IEC 60811-605

ILT-U-2294Electric and optical fibre cables determinations. Mineral oil immersion tests for sheaths

Standard :IEC 60811-404

ILT-U-1960Electric determination

Description: Dielectric Test – AC test Method: IEC 60903

ILT-U-3216Electric determination


Hail test MQT17, Thermal cycling test MQT11, Humidity-freeze test MQT12, Damp heat test MQT13 (tasting time 1.5 months). According to IEC 61215

Standard :IEC 61215-1-2, [:en]EN 61215-1-1[:]

ILT-U-2239Electric determination. 1A

Description: All determinations (2000hs aging test) Method: UNIT 1160

ILT-U-2238Electric determination. 1B

Description: Cable. All determinations (except fire propagation test if applicable) Method: NM 247-3

ILT-U-2237Electric determination. 1C

Description: Cable Method: NM 247-5

ILT-U-2191Electric determination. 1E

Description: Displacement factor; Lumen maintenance; and Endurance tests in Led lamp Method: IEC 62612

ILT-U-2287Electric determinations

Standard :IEC 60669-1

ILT-U-2288Electric determinations

Standard :IEC 60884-1, IEC 60884-1

ILT-U-2289Electric determinations

Standard :[:en]IEC 60598-1 [:]

ILT-U-644Electric iron determinations

Description: Resistance of insulating material to abnormal heat, to fire and to tracking; Method: SASO 2815

ILT-U-645Electric kettle determinations

Description: Moisture resistance; Screws and connections and Supply connection and external flexible cords Method: IEC 60335-1, IEC 60335-2-15

ILT-U-1802Electric storage water-heater determinations

Description: General conditions for measurements; measurements of stored water temperatures; measurement of energy consumption; verification of the actual capacity; standing loss per 24 h; hot water output; and reheating time Method: IEC 60379

, ILT-U-3363Electric vehicles (EV) determination.


All determinations (electric vehicle conductive charging system). According to IEC 61851-1

Standard :IEC 61851-1,

, ILT-U-3355Electric vehicles (EV) determinations


Conductive charging of electric vehicles. According to IEC 62196-1, IEC 62196-2

Standard :IEC 62196-2, , IEC 62196-1

, ILT-U-3357Electric vehicles (EV) determinations.


Safety test and EMC, according to IEC 62752

Standard :IEC 62752,

ILT-U-407Electrical and Photometric Measurements


Life span of a lamp, Determination of the colorimetric parameters during the aging procedure, The effect of the variation of temperature and humidity parameters on the lamp during it's life time, and Electrical parameters variation during the aging process. According to IESNA LM-82

Standard :

ILT-U-2124Electrical and photometric measurements.


Input Electrical Parameters: Operating current (A), Real power (W), Light efficiency (lm / W), Operating voltage (V), Photometric and Chromatic Parameters: Initial luminous flux (lm), Color temperature (K), Color coordinates (x, y), Color Rendering Index (CRI), Spectral Curve. According to IESNA LM-09

Standard :

ILT-U-2123Electrical and photometric measurements. 1B


Input Electrical Parameters: Operating current (A), Real power (W), Light efficiency (lm / W), Operating voltage (V), Photometric and Chromatic Parameters: Initial luminous flux (lm), Color temperature (K), Color coordinates (x, y), Color Rendering Index (CRI), Spectral Curve. According to IESNA LM-51

Standard :

ILT-U-2122Electrical and photometric measurements. 1C


Input Electrical Parameters: Operating current (A), Real power (W), Light efficiency (lm / W), Total harmonic distortion in current (%), Power factor (FP), Photometric and Chromatic Parameters: Initial luminous flux (lm), Color temperature (K), Color coordinates (x, y), Color Rendering Index (CRI), Spectral Curve. According to IESNA LM-66

Standard :

ILT-U-1816Electrical appliances determination.

Description: Withstanding Voltage, and Insulation Resistance acc Method: ISO 16750-2

ILT-U-910Electrical appliances determination. 1A

Description: Power Input and Current;Insulation resistance;Protection against active parts; and Heating Method: IEC 60335-1, IEC 60598-1

ILT-U-1462Electrical appliances determination. 1B

Description: Power Cord Flexibility Tester; Stability Tester; and Mechanical Impact test Method: IEC 60335-1

ILT-U-1463Electrical appliances determination. 1C

Description: Power Input and Current; High Voltage Test; Leakage Current Test; Screws and Connections; and Provision for Earthing Method: IEC 60335-1

ILT-U-1708Electrical appliances determination. 1D

Description: Leakage current and voltage at operating temperature: Leakage current and voltage withstand; and operation in abnormal condition Method: IEC 60335-2-34

ILT-U-2241Electrical appliances determination. 1E

Description: Hot set test Method: 60811-2-1

ILT-U-2197Electrical appliances determination. 1F

Description: Vertical flame propagation for a single insulated wire or cable Method: IEC 60332-1

ILT-U-2198Electrical appliances determination. 1G

Description: Measurement of smoke density of cables burning Method: IEC 61034-2

ILT-U-2199Electrical appliances determination. 1H

Description: Vertical flame spread of vertically-mounted bunched wires or cables. Category C Method: IEC 60332-3-24

ILT-U-822Electrical appliances determination. 1J

Description: Area of the cross section of the electrical conductors; Insulation thicknesses and electrical conductors covered; Insulation Resistance; and Determination of mechanical effort to breakdown voltage. Method: NMX-J-312, NMX-J-177, NMX-J-129

ILT-U-1639Electrical appliances determination. 1K

Description: Marked; comparative tracking index (CTI); ball pressure; plugs; and cross sectional area for supply cord conductors Method: IEC 60335-1, IEC 60335-2-7, IEC 60695-2-10, CEI 23-50, IEC 60112

ILT-U-1264Electrical characteristic determinations – LED Driver for LED lamp

Description: Output Voltage and current, Total circuit power, Circuit power factor, and Supply current Method: IEC 62384

, ILT-U-3458Electrical determiantions


Electrical test in direct voltage with water electrode, test item: Insulating sleeves, MT dielectric gloves. According to ASTM F496

Standard :ASTM F496,

, ILT-U-2119Electrical determination

Description: Electrical testing of Hand-Held Live-Line Insulating Tools (Fiberglass-Reinforced Plastic (FRP) Method: ASTM F3121

ILT-U-2559Electrical determination

Assessment of label durability. According to EN 60598-1:2015, IEC 61347-1, IEC 62560, NTC 1337, NTC 1650

ILT-U-2567Electrical determination

Electroluminescence of photovoltaic modules. According to IEC 60904-13

ILT-U-2603Electrical determination


Lines of flight and distances in the air. According to IEC 60664-1

Standard :IEC 60664-1,

ILT-U-2604Electrical determination


Leakage current. According to IEC 60990

Standard :IEC 60990,

ILT-U-2605Electrical determination


Fire test of tubes with 1 kW burner. According to IEC 61386-1

Standard :IEC 61386-1,

ILT-U-2634Electrical determination


Leakage current, Protection against active parts. According to IEC 60335-1, IEC 60335-2-74

Standard :IEC 60335-2-74, IEC 60335-1,

ILT-U-2682Electrical determination


Glowing/hot-wire. According to IEC 60695-2-10

Standard :

ILT-U-2692Electrical determination


Dielectric testing. According to IEC 60900

Standard :IEC 60900,

ILT-U-2708Electrical determination


Power Consumption in ON mode. According to IEC 62087-3, IEC 62087-1

Standard :IEC 62087-3, IEC 62087-1,

ILT-U-2728Electrical determination


Energy efficiency in microwave active mode. According to IEC 60705, IS 15750

Standard :IEC 60705, IS 15750,

ILT-U-2731Electrical determination


Energetic efficiency in tumble dryer. According to IEC 61122, SASO 2883

Standard :IEC 61122, SASO 2883,

ILT-U-2755Electrical determination


Halogen acid gas emission, Acid gas emission. According to UL 2556 Clause 9.10 and 9.11

Standard :UL 2556,

ILT-U-2756Electrical determination


Smoke emission. According to UL 2556  Clause 9.9

Standard :UL 2556,

ILT-U-2777Electrical determination


All determinations (winding extension cords). According to IEC 61242

Standard :IEC 61242,

ILT-U-2778Electrical determination


All determinations (extension cords). According to IEC 60884-2-7

Standard :IEC 60884-2-7,

ILT-U-2779Electrical determination


All determinations (boxes and enclosures). According to IEC 60670

Standard :IEC 60670,

ILT-U-2780Electrical determination


All determinations. (adapters)  According to IEC 60884-2-5

Standard :

ILT-U-2781Electrical determination


All determinations (differential circuit breaker sample). According to IEC 61008-2-1  

Standard :IEC 61008-2-1,

ILT-U-2811Electrical determination


Luminous intensity or optical angular distribution measurement. According to IESNA LM-79 (Clause 8)

Standard :

ILT-U-2845Electrical determination


Insulation resistance at 70 degrees test.  According to IEC 60227-1, IEC 60227-3

Standard :IEC 60227-3, IEC 60227,

ILT-U-2861Electrical determination


Particular requirements for electrical heating appliances for breeding and rearing animals. Accordign to IEC 60335-2-71

Standard :IEC 60335-2-71,

ILT-U-2923Electrical determination


Making and breaking capacities of switching elements under normal/abnormal conditions acc. According to IEC 60947-5-1 Clause /

Standard :IEC 60947-5-1,

ILT-U-2958Electrical determination


Verification of limitation of rotation (of a rotary switch). According to IEC 60947-5-1:2016  chapter 8.2.6

Standard :IEC 60947-5-1,

ILT-U-3019Electrical determination


Visual inspection of solar panels, Electrical insulation to solar panels, and Maximum power point for solar panels. According to IEC 61215-2

Standard :IEC 61215-2, [:en]EN 61215-2[:]

ILT-U-3020Electrical determination


Ground bound to solar panels. According to IEC 61730-2 clause 10.11

Standard :IEC 61730-2

ILT-U-3009Electrical determination


Protection against electric shock. According to IEC 60598-1, IEC 60898-1, IEC 62560, and NTC 1650

Standard :[:en]NTC 1650[:], [:en]IEC 62560[:], [:en]IEC 60898-1[:], [:en]IEC 60598-1 [:]

ILT-U-3051Electrical determination


Electrical Strength, Insulation resistance, Leakage Current, and Ground Resistance test. According to IEC 60598-1

Standard :[:en]IEC 60598-1 [:]

ILT-U-3115Electrical determination


Heat resistance, ball test. According to IEC 60695-10-2. Needle burner test. According to   IEC 60695-2-11. Glow wire. According to  IEC 60695-11-5

Standard :IEC 60695

ILT-U-3119Electrical determination


Total Harmonic Distortion (THD) & electrical parameter. Accordig to IEC 61000-3-2

Standard :IEC 61000-3-2

ILT-U-3123Electrical determination


Durability of markings Patient, Impedance of protective earthing, leakage current measurements. According to EN 60601-1

Standard :[:en]IEC 60601[:]

ILT-U-3127Electrical determination


Distance measurement between moving parts. According to ISO 21856:2022 clause 12.1

Standard :ISO 21856

ILT-U-3208Electrical determination


Air flow (one speed). According to IEC 60879

Standard :IEC 60879

ILT-U-3212Electrical determination


Goniophotometer and integrating sphere. According to IESNA LM-79

Standard :

ILT-U-3244Electrical determination


All determinations IEC 60335-2-11

Standard :IEC 60335-2-11

ILT-U-3243Electrical determination


All determinations (centrifugal clothes dryer). According to IEC 60335-2-4

Standard :IEC 60335-2-4

ILT-U-3241Electrical determination


All determinations (battery charger). According to IEC 60335-2-29

Standard :[:en]IEC 60335-2-29[:]

ILT-U-3240Electrical determination


All determinations (storage water heater). According to IEC 60335-2-21

Standard :IEC 60335-2-21

ILT-U-3239Electrical determination


All determinations (storage water heater). According to IEC 60335-2-74

Standard :IEC 60335-2-74

ILT-U-3238Electrical determination


All determinations (storage water heater). According to IEC 60335-2-73

Standard :IEC 60335-2-73

ILT-U-3234Electrical determination


All determinations (cooking plate). Acccording to IEC 60335-2-102

Standard :

ILT-U-3235Electrical determination


All determinations (cooking plate). According to IEC 60335-2-6

Standard :IEC 60335-2-6

ILT-U-3233Electrical determination


All determinations (cooking plate). According to IEC 60335-2-12

Standard :IEC 60335-2-12

ILT-U-3236Electrical determination


All determinations (electric smoothing iron). According to IEC 60335-2-44

Standard :IEC 60335-2-44

ILT-U-3237Electrical determination


All determinations (electric smoothing iron). according to IEC 60335-2-85

Standard :IEC 60335-2-85

ILT-U-3232Electrical determination


All determinations (cooking plate). According to IEC 60335-2-15

Standard :[:en]IEC 60335-2-15[:]

ILT-U-3223Electrical determination


Performance requirements. According to IEC 60969

Standard :

ILT-U-3224Electrical determination


All determinations (electric fan). According to IEC 60335-1, IEC 60335-2-80

Standard :IEC 60335-2-80

ILT-U-3228Electrical determination


All determinations

(electric heating ) IEC 60335-2-30

Standard :IEC 60335-2-30

ILT-U-3218Electrical determination


All determinations (cord extension). According to BS 1363-2, GSO BS 1363-2

Standard :BS 1363-2

ILT-U-3226Electrical determination


All determinations

(Fruit juice extractor) IEC 60335-2-14

Standard :IEC 60335-2-14

ILT-U-3231Electrical determination


All determinations (cooking plate). According to IEC 60335-2-13

Standard :IEC 60335-2-13

ILT-U-3227Electrical determination


All determinations (toaster). According to IEC 60335-2-9

Standard :IEC 60335-2-9

ILT-U-3221Electrical determination


All determinations (cord extension). According to SASO 2815

Standard :[:en]SASO 2815[:]

ILT-U-3222Electrical determination


All determinations (cord extension). According to GSO 2117

Standard :

ILT-U-3219Electrical determination


All determinations (cord extension). According to GSO BS 546, BS 546:1950

Standard :BS 546

ILT-U-3220Electrical determination


All determinations (cord extension). according to SASO 2203

Standard :[:en]SASO 2203[:]

ILT-U-3230Electrical determination


All determinations (storage water heater). According to IEC 60335-2-35

Standard :IEC 60335-2-35

ILT-U-3225Electrical determination


All determinations

(refrigerator) IEC 60335-2-25

Standard :IEC 60335-2-25

ILT-U-3217Electrical determination


All determinations (cord extension). According to BS 1363-1, GSO BS 1363-1

Standard :BS 1363-1

ILT-U-3229Electrical determination


All determinations (microwave oven). According to IEC 60335-2-25

Standard :IEC 60335-2-25

ILT-U-3252Electrical determination


All determinations (washing machine sample). According to IEC 60335-2-7

Standard :IEC 60335-2-7

ILT-U-3251Electrical determination


All determinations (ballast sample). According to IEC 61347-1

Standard :IEC 61347-1

ILT-U-3250Electrical determination


All determinations (drill press sample). According to IEC 60204-1

Standard :IEC 60204-1

ILT-U-3246Electrical determination


All determinations (extension cord sample). Accoridng to IEC 60884-2-1

Standard :IEC 60884-2-1

ILT-U-3247Electrical determination


All determinations (extension cord sample). According to IEC 60884-2-3

Standard :IEC 60884-2-3

ILT-U-3249Electrical determination


All determinations (extension cord sample). According to IEC 60884-2-6

Standard :IEC 60884-2-6

ILT-U-3248Electrical determination


All determinations (extension cord sample). According to IEC 60884-2-4

Standard :IEC 60884-2-4

ILT-U-3301Electrical determination


Measuring luminous flux and color maintenance of LED packages, arrays, and modules. (Temperature 85 °c. Hours: 10.000 with intervals every 1.000 hours). According to IESNA LM-80

Standard :IESNA LM-80,

ILT-U-3308Electrical determination


Total Luminous Flux Measurement. According to IESNA LM-78

Standard :IESNA LM-78,

ILT-U-3307Electrical determination.


Optical and Electrical Measurements. According to IESNA LM-85

Standard :IESNA LM-85,

ILT-U-3360Electrical determination.


Measuring the performance in dishwasher sample. According to IEC 60436, SASO 3029.

Standard :IEC 60436, SASO 3029,

ILT-U-2320Electrical determinations

Cord extension set

ILT-U-2488Electrical determinations

Moisture resistance, insulation resistance and rigidity in switch. According to NTC 1337

ILT-U-2499Electrical determinations

Crosschecking photobiological safety testing of lamps. According to IEC 62471

ILT-U-2512Electrical determinations

Resistance to humidity + IP. Insulation resistance and dielectric strength and Temperature rise.  According to IEC 62196-1

ILT-U-2516Electrical determinations

Salt spry. According to IEC 60068-2-52, EN 61111

ILT-U-2578Electrical determinations

Energetic efficiency in washing machines. According to IEC 60456

ILT-U-2635Electrical determinations


Measurement of power consumption in (stand by), Energy efficiency labeling on televisions in ON mode. According to IRAM 62411, IRAM 62301

Standard :IRAM 62411, IRAM 62301,

, ILT-U-2655Electrical determinations


Electrical Insulating Matting Dielectric Tests. According to EN 61111

Standard :EN 61111,

ILT-U-3025Electrical determinations


Heating. According to IEC 61058-1

Standard :IEC 61058-1

ILT-U-3052Electrical determinations


Insulation resistance. According to NMX-J-294-ANCE-2008

Standard :NMX-J-29

, ILT-U-3457Electrical determinations


Electrical test in direct voltage with water electrode. According to ASTM F1116

Standard :ASTM F1116,

, ILT-U-3460Electrical determinations


Electrical test in direct voltage with metallic electrode. Test item: Telescopic pole, Fiberglass reinforced pole. According to IEEE Standard 516

Standard :IEEE Standard 516,

, ILT-U-3459Electrical determinations


Electrical test in direct voltage with metallic electrode. According to ASTM F479

Standard :ASTM F479,

ILT-U-3356Electrical determinations.


All determinations in industrial plug sample. According to IEC 60309-2

Standard :IEC 60309-2,

ILT-U-2113Electrical determinations. 1A

Description: Classification, instructions, Dimensions, volumes, and weights measurement, Protection against access to live parts, Power input and current, Heating and protection against temperature rise, Leakage current and electric strength at operating temperature, Resistance to solid and foreign object, Moisture resistance, Ageing and life time, ?Endurance and Tripping Characteristics, Abnormal operation, Stability and mechanical hazards, Mechanical strength, Construction and Components, Internal wiring, Supply connection and external flexible cords, Terminals for external conductors, Screws and connections, Provision for earthing, Clearances, creepage distances and solid insulation, Resistance to heat and fire , Flame retardation, Resistance to rusting, Starting of motor-operated appliances, Electrical resistance, resistivity and conductivity, Performance requirements for Luminaire and modules, Energy efficiency, functionality and labelling requirements for lighting products , Breaking and making capabilities, Pressure test, Electrical properties: voltage, energy, resistance, impedance, capacity and capacitance, Temperature shock test, Tensile strength and elongation, and Short circuit and overload protection Method: IEC 60335-1, IEC 60969, IEC 60884-1, IEC 60227, IEC 61347-1

ILT-U-2103Electrical determinations. 1B

Description: Ball pressure, Dielectric Strength Test; Power Input and Curren and Leakage Current Test Method: IEC 60335-1, IEC 60745-1, IEC 60950-1, IEC 60598-1

ILT-U-2090Electrical determinations. 1C

Description: Insulation Resistance Test; Dielectric Strength Test; and Leakage Current Test Method: IEC 60335-1

ILT-U-2120Electrical equipment of machines determinations

Description: Verification of the continuity of the protective bonding circuit tests; Insulation resistance tests; Voltage tests; Protection against residual voltages; and Functional tests Method: IEC 60204-1

ILT-U-821Electrical resistance and dielectric strength determination

Description: Electrical resistance DC; and Dielectric strength Method: NMX-J-212, NMX-J-293

ILT-U-312Electrical resistance in conductors of insulated cables

Description: Annexed A. Method: IEC 60228

ILT-U-311Electrical resistance, conductivity and resistivity detrmination in electrical cables.

Description: IEC 60468 and NMX-J-212-ANCE Method: IEC 60468, NMX-J-212-ANCE

, ILT-U-3376Electrical resistivity determiantion


All requirements for connection components, According to IEC 62561-1

Standard :IEC 62561-1,

ILT-U-2574Electrical resistivity determination

Electrical resistivity test. According to IEC 62561-2

ILT-U-1638Electrical test determinations in toys samples. ET

Description: Electrical tests (excluding radiation/emi-emc tests) Method: IEC 62115

ILT-U-1895Electricity metering equipment (AC). Electrical determinations

Description: All Test (except chap 6.10.5, 6.10.6, and 6.10.7) Method: IEC 62052-31, IEC 62052-1

, ILT-U-2754Electricity metering equipment determination


No Load Test, Starting Current, Meter Constant, Limit of error due to variation of current. According to IEC 62053-21

Standard :IEC 62053-21,

ILT-U-2789Electromagnetic compatibility (EMC) determination


Electromagnetic compatibility (EMC). According to EN 50498

Standard :

ILT-U-3383Electromagnetic compatibility determiantion


Conducted disturbance measurements 9 to 30000 kHz for machine tools Emission. Accoring to ISO 50370-1

Standard :ISO 50370-1,

ILT-U-3344Electronic component determination


EDXRF detection of Pb, Cd, Hg, Cr, and Br. According to IEC 62321-3-1

Standard :IEC 62321-3-1,

ILT-U-3456Electronic meter determinations


Idling (Active Energy), Start (Active Energy), Influence of the variation of the current (Active Energy), Verification of the constant. (Active Energy), Resisted voltage test at industrial frequency. According to IEC 62058-31

Standard :IEC 62058-31,

ILT-U-1567EMC – AC Power-line Conducted Emission Measurement and Radiated Emission Measurements

Description: AC Power-line Conducted Emission Measurements (ANSI C63.4 clause 7); and Radiated Emission Measurements (ANSI C63.4 clause 8) Method: ANSI C63.4

ILT-U-2747EMC determination


EMC. Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests. According to IEC 61000-4-11

Standard :IEC 61000-4-11,

ILT-U-3367EMC determination


Electromagnetic Compatibility (EMC). Electrical fast transient/burst immunity test. According to IEC 61000-4-4

Standard :IEC 61000-4-4,

ILT-U-3368EMC determination


Electromagnetic Compatibility (EMC). Radiated, radio-frequency, electromagnetic field immunity test. According to IEC 61000-4-3

Standard :IEC 61000-4-3,

ILT-U-3369EMC determination


Electromagnetic Compatibility (EMC) Power frequency magnetic field immunity test. According to IEC 61000-4-8

Standard :IEC 61000-4-8,

ILT-U-2399Energy efficiency determination


Energy Efficiency. Luminaire (5 weeks). According to SASO 2902

Standard :SASO 2902

ILT-U-1798Energy efficiency determination.

Energy Efficiency. LED bulb Luminaire. Method: SASO 2870

ILT-U-1803Energy Efficiency determinations in household refrigerator.

Energy Efficiency Test on Household refrigerator, SASO 2892 and IEC 62552

ILT-U-692Energy efficiency determinations. 1B

Description: Ventilators Method: Portaria N° 20

ILT-U-3055Energy efficiency in electric instantaneous water heater.


Energy efficiency Test. According to SASO 2884 and EN 50193-1

Standard :

ILT-U-1230Energy efficiency in electric storage Water heater

Energy Efficiency Test on electric storage Water heater, according to Standard SASO 2884 and EN 50440

ILT-U-3112Energy efficiency in household appliances


Energy efficiency. According to IEC 61121

Standard :IEC 61121

ILT-U-3113Energy efficiency in household appliances


Energy Efficiency. According to IEC 60350-1

Standard :IEC 60350-1

ILT-U-296Energy Efficiency in LED Luminaire determination

Energy Efficiency. According to SASO 2927

ILT-U-1247Energy Efficiency in single phase motors

Efficiency. According to IEC 60034-2-1 , IEC 60034-30-1

ILT-U-956Energy efficiency test

Description: Air conditioning determination Method: ISO 5151

ILT-U-1246Energy efficiency three-phase motors

Description: Method: IRAM 62405

, ILT-U-2981Energy meter determination


Accuracy test (calibration), Constant verification test, Starting test, No-load operation test. According to NTC 4856

Standard :NTC 4856,

ILT-U-3364Energy-dispersive X-RAY fluorescence detemination


Standby power in Dishwasher sample. According to EN 50564

Standard :EN 50564,

ILT-U-2814Environmental determination


Impacting water (Test Rb). According to EN 60068-2-18, IEC 60068-2-18

Standard :EN 60068-2-18, IEC 60068-2-18,

ILT-U-2815Environmental determination


Non abrasive fine dust (Test La). According to EN 60068-2-68, IEC 60068-2-68

Standard :EN 60068-2-68, IEC 60068-2-68,

ILT-U-1825Environmental testing. 1A

Description: Environmental testing (Method 4). Gas concentration: SO2 (200 + /- 20) ppb, H2S (10 + /- 5) ppb, NO2 (200 + /- 20) ppb, and Cl2 (10 + /- 5) ppb. Temperature 25 +/- 1º C, and Humidity 75 +/- 3%. Test duration 4 days Method: IEC 60068-2-60

ILT-U-1551Environmental testing. 1C

Description: Environmental testing (48h, 5%NaCl/35°C) Method: EN 60068- 2-11

ILT-U-1128Environmental testing. 1D

Description: 96h. 40ºC con 93%HR Method: IEC 60068-2-78

ILT-U-1127Environmental testing. 1E

Description: Total 10 cycles de 24h. Tmax. 65ºC y HR93% Tmín -10ºC IEC 60068-2-38 Method:

ILT-U-1126Environmental testing. 1F

Description: Cycle Db -6 cycles 12h +55ºC 12h. +25ºC 93% H.R IEC 60068-2-30 Method:

ILT-U-1125Environmental testing. 1G

Description: Cycle Nb Tmax. +150ºC Tmín -40ºC – 96h Method: IEC 60068-2-14

ILT-U-1124Environmental testing. 1H

Description: 150ºC – 168h Method: IEC 60068-2-2

ILT-U-1123Environmental testing. 1I

Description: 40ºC – 96h Method: IEC 60068-2-1

ILT-U-2529ESD determination

Electrostatic discharge test. Method IEC 61000-4-2

ILT-U-2347ESD discharge determination

ESD discharge

ILT-U-2051ESD, Garment qualification

Description: Point to point resistance (Rpp); Groundable point resistance (Rpgp); and Body contact point resistance (BCP) Method: ANSI/ESD STM2.1

ILT-U-2057ESD, Gloves and finger cot resistance qualification

Description: ESD, Glove and finger cot resistance qualification Method: ANSI/ESD STM15.1

ILT-U-2053ESD, Planar materials determinations

Description: Two-point resistance; Surface resistivity; and Volume resistivity Method: ANSI/ESD STM 11.12, ANSI/ESD STM 11.13, ANSI/ESD STM 11.11

ILT-U-2054ESD, Resistance through a person to ground

Description: ESD, Flooring Qualification Method: ANSI/ESD STM 97.1

ILT-U-2052ESD, Resistance to ground. ET

Description: Footwear qualification Method: ANSI/ESD STM9.1

ILT-U-333Fibre Optic connector determination

Description: Insertion loss measurement Method: IEC 61300-3-4, IEC 61280-4-1

ILT-U-1700Fire Hazard testing

Description: Glowing/hot-wire and Needle-flame test Method: IEC 60695-2-11, IEC 60695-11-5

ILT-U-995Flexural properties of unreinforced plastic and electrical insulating materials

Description: Flexural properties of unreinforced plastic and electrical insulating materials Method: ASTM D790

ILT-U-173General and safety requirements of Lamp controlgear

Description: IEC 61347-1 Method: IEC 61347-1

, ILT-U-3455Gloves determination


Electrical test in direct voltage with water electrode. According to ASTM F496-20 and EN 60903:2005

Standard :ASTM F496, EN 60903, , [:en]IEC 60903[:]

ILT-E-02Glowing/hot-wire test

Description: IEC 60695-2-10 Method: IEC 60695-2-10

ILT-U-1701Grinder determinations

Description: Grinder Method: IEC 60745-1

ILT-U-1425Hair dryer determinations – Sound power

Description: Sound power Method: NBR 13910-2-2

ILT-U-1340Halogenated compounds and ashes determinations

Description: Ashes; and halogenated acid gases Method: IEC 60811-605, IEC 60754-1

ILT-U-2028HF (Halogen) in semiconductor device determination

Description: HF (Halogen) Method: EN 14582

ILT-U-724Hot set test for cross-linked materials

Description: Method: EN 60811-507

ILT-U-2887Household refrigerator determination


Energy consumption in refrigerators. According to IEC 62552-3

Standard :IEC 62552-3,

ILT-U-2520IK determination

IK Grade. According to IEC 60068-2-75

ILT-U-1275Immunity to ESD discharge

Description: ESD discharge Method:

ILT-U-1702Impact drills determinations

Description: Impact drills Method: IEC 60745-2-1

ILT-U-3384Industrial, scientific and medical equipment determination.


Conducted disturbance measurements 9 to 30000 kHz for Industrial, scientific and medical equipment. Accoridng to ISO 55011

Standard :ISO 55011,

ILT-U-582input power (DC) and output power (AC) for performance calculations (Photovoltaic)

Description: Method: IEC 61683

ILT-U-385Insulation resistance

Description: Clause 2.6 Method: IEC 60432-1

ILT-U-326Insulation resistance determination in electrical switches for household and similar fixed

Description: Terminals (clause 12) Method: IEC 60669-1

ILT-U-1858Insulation/screen moisture content determination in cable

Description: Insulation/screen moisture content Method: BS 7912

ILT-U-352IP code Test in external lighting

Description: IEC 60529 Method: IEC 60529

ILT-U-2125Lamp ballast Measurements

Description: Starting current rms (A); Starting voltage rms (V); Operating voltage (V); Operating current (A); Total harmonic distortion in current (%); Total harmonic distortion in tension (%); Real Power (input) (W); Power Factor; Cosj; Output voltage (V); Output current (A); Output Crest Factor (current); Actual Power Output (W); Power losses at nominal input voltage (W) (Pentrada – Psalida); Ballast Factor; Extinction voltage (V) Method: ANSI C82.6

ILT-U-1407Lamp caps determination. 1A

Description: Method: IEC 60061-3

ILT-U-1294Lamp caps determination. 1B

Description: Dimension Method: IEC 60061-1

ILT-U-2790Laser product determination


Classification. Accroding to IEC 60825, EN 60825

Standard :IEC 60825, EN 60825,

ILT-U-2333LED lamps determinations

Photometric data

ILT-U-2334LED lamps determinations

Measurement of lamps and lamp systems (section 5)

ILT-U-1661LED light engines and lamps at temperature determination


Measured temperature of Tb, Measured temperature of Td, Board temperature, Ambient temperature, Input Power (W), Input Voltage (V), Input Current (A), Luminous Flux (lm), Luminous Efficacy (lm/W), CIE chromaticity (x,y), Color Rendering Index, Correlated Color Temperature (k). According to IESNA LM-82

Standard :

ILT-U-2742LED luminaire determination


Measuring long term lumen maintenance of led light source. According to IESNA-TM-21-11

Standard :, IES-TM21-11

ILT-U-2743LED luminaire determination


Measurement of the LED source case temperature within the LED system (luminaire or lamp) while it is operating in it designed position and or environment. According to ISTMT

Standard :

ILT-U-2335LED module determinations

Safety determinations

ILT-U-2805Light and lighting determination


Measurement and presentation of photometric data of lamps and luminaires. According to EN 13032-4

Standard :EN 13032-4,

ILT-U-1983Lighting determinations

Description: Accesiblility of live parts; Normal temperature test; Abnormal temperature testsAccesiblility of live parts; Normal temperature test; Abnormal temperature tests; and Needle flame Method: UL 1598

ILT-U-2791Lithium-ion batterie determination


Safety requirements. According to IEC 62133

Standard :IEC 62133,

ILT-U-2792Lithium-ion batterie determination


Altitude simulation, Thermal test, Vibration, Shock, External short circuit, Impact/Crush, Overcharge, Forced discharge. According to UN 38.3

Standard :UN 38.3,

ILT-U-1051Loss of mass test for thermoplastic insulations and sheaths

Description: Method: IEC 60811-409

ILT-U-2798Luminaire determination


Needle flame. According to IEC 60598-1  Clause 13.3.1

Standard :[:en]IEC 60598-1 [:],

ILT-U-2799Luminaire determination


Heating test (normal operation). According to IEC 60598-1    

Standard :[:en]IEC 60598-1 [:],

ILT-U-2800Luminaire determination


Corrosion resistance - oxidation. according to IEC 60598-1 

Standard :[:en]IEC 60598-1 [:],

ILT-U-2801Luminaire determination


Moisture Resistance, Insulation Resistance, and Dielectric Strength. Accoridng to IEC 60598-1

Standard :[:en]IEC 60598-1 [:],

ILT-U-2806Luminaire determination


Photometric. According to IESNA LM-41-20

Standard :, IES LM-41-20

ILT-U-2807Luminaire determination


Photometric. According to IESNA LM-20-20

Standard :, IES LM-20-20

ILT-U-2808Luminaire determination


Photometric. According to IESNA LM-46-20

Standard :, IES LM-46-20

ILT-U-2809Luminaire determination


Photometric. According to IESNA LM-31-20

Standard :, IES LM-31-20

ILT-U-1569Luminaire determination.

Different determinations. Method: IEC 60598-1

ILT-U-1465Luminaire determination. 1A

Description: Lampholders clause 4.4 Method: IEC 60598-1

ILT-U-1788Luminaire determination. 1B

Description: Emergency luminaire Method: IEC 60598-2-22

ILT-U-1786Luminaire determination. 1C

Description: Portable LED outdoor luminaire Method: IEC 60598-2-4

ILT-U-1691Luminaire determination. 1D

Description: fixed LED outdoor luminaire Method: IEC 60598-2-1

, ILT-U-487Magnetic materials determination


Magnetic properties by means of an Epstein frame. According to IEC 60404-2 

Standard :

ILT-U-1910Measurement of conductors

Description: Mass per unit length of conductor Method: EN 50182

ILT-U-1213Measurement of Luminous Intensity

Description: Regulatory used is the United Nations 3 and 23 Method:

ILT-U-149Measuring thickness of Insulation and Insulation resistance determinations

Description: Polyvinyl chloride insulated cables of rated voltages up to 750 V Method: IEC 60227, IEC 60228, IEC 60227-3, IEC 60227-4, IEC 60227-5, IEC 60228-11

ILT-U-1590Medical electrical equipment

Description: Safety requirements Method: IEC 60601

, ILT-U-401Mercury determination in batteries (button cell)

Mercury in batteries (button cell)

, ILT-U-2404Military equipment determination

Fungal resistance. MIL-STD-810G section 508.7 method

ILT-U-2721Optical fiber determination


Pulling test on complete cable. According to IEC 60794-1-2 E1

Standard :IEC 60794-1,

ILT-U-2720Optical fiber determination


Bending test on complete cable. According to IEC 60794-1-2 E11

Standard :IEC 60794-1,

ILT-U-2719Optical fiber determination


Kink test on complete cable. According to IEC 60794-1-2 E10

Standard :IEC 60794-1,

Optical fiber determination


Water penetration test on complete cable. According to IEC 60794-1-2 F5

Standard :IEC 60794-1

, ILT-U-2717Optical fiber determination


Repeated bending test on complete cable. According to IEC 60794-1-2 E6

Standard :IEC 60794-1,

ILT-U-2716Optical fiber determination


Temperature cycles test on complete cable. According to IEC 60794-1-2 F1

Standard :IEC 60794-1,

ILT-U-2715Optical fiber determination


Torsion test on complete cable. According to IEC 60794-1-2 E7

Standard :IEC 60794-1,

ILT-U-2714Optical fiber determination


Impact test on complete cable. According to IEC 60794-1-2 E4

Standard :IEC 60794-1,

ILT-U-2713Optical fiber determination


Crush test on complete cable. According to IEC 60794-1-2 E3

Standard :IEC 60794-1,

ILT-U-2718Optical fiber determination


Water penetration test on complete cable. According to IEC 60794-1-2 F5

Standard :IEC 60794-1,

ILT-U-2055Particle cleanliness Helmke drum

Description: Particle cleanliness Helmke drum Method: IES-RP-CC003.2

, , ILT-U-3101PCA visual Inspection


Section 4 – Hardware, Section 5 – Soldering, Section 6 – Terminal Connections, Section 7 – Through Hole Technology, Section 8 – Surface Mount Assemblies, Section 9 – Component Damage, Section 10 – Printed Circuit Boards and Assemblies, Section 11 – Discrete Wiring, Section 12 – High Voltage. According to IPC-A-610 version H

Standard :

ILT-U-2276Photometry determination

Norma :CIE 121

ILT-U-2277Photometry determination

Norma :CIE 140

ILT-U-2278Photometry determination

Norma :CIE S 025/E

ILT-U-2463Photovoltaic inverter determinations

According to IEC 62116, NBR 16149, NBR 16150

ILT-U-3164Photovoltaic module determination


Visual inspection, Performance at STC, Maximum Power determination, Insulation Thickness test, sharp edge test, Bypass diode functionality, Accessibility test, Cut susceptibility, Continuity test of equipotential bonding, Insulation test, Wet leakage current test, Temperature test, Hot spot endurance test, fire test, ignitability test, Bypass diode thermal test, Reverse current overload test, Module breakage test, Screw connection test, Static mechanical load test, Peel test, Lap Shear strength test, Material creep test, Robustness of terminations, Thermal Cycling test, Humidity Freeze test, Damp Heat test, UV test, Cold conditioning test, Dry heat conditioning test. According to IEC 61730-2

Standard :IEC 61730-2

ILT-U-3165Photovoltaic module determination


Measurement of temperature coefficients, Performance at low irradiance, Outdoor exposure, Hail test, Stablization, Dynamic mechanical load test, Potential induced degradation test, bending test. According to IEC 61215-1-2

Standard :IEC 61215-1-2

ILT-U-2135Photovoltaic modules determinations

Description: Performance at STC (MQT 06.1 ) Method: EN 61215-1-1, EN 61215-2

ILT-U-1464Plug determination

Description: Heat resistance test; and Mechanical Strength Method: SASO 2203, SASO 443

ILT-U-408Plugs, receptacles, manual switches determinations

Description: Dielectric strength, Temperature rise; Temperature rise; and Incandescent Wire Method: NTC 1337, NTC 5283, NTC 1650

ILT-U-1699Portable heating tools determination

Description: Portable heating tools Method: IEC 60335-2-45

ILT-U-384Power input and current, leakage current and electric strength, provision for earthing and protection against access to live parts

Description: IEC 60335-1 Clause 8.1.1, 10, 16.2, 16.3, 27.5, & IEC 61558-1 Clause 24.4 Method: IEC 60335-1, IEC 61558

ILT-U-419Power input, electric strength and leakage current and cross sectional area for supply cord conductors

Description: IEC 60335-1 Method: IEC 60335-1

ILT-U-2116Power meter box

Description: Verification of thermal stability – resistance to aging Method: NBR 15820

, ILT-U-2890Primary batteries determination


Rated voltage, Dimensional, Minimum average duration, and Leaks and deformations. According to IEC 60086-1

Standard :IEC 60086-1,

ILT-U-563Radiated emission and conducted emission determinations

Description: Method: CISPR 25

ILT-U-572Radiated emissions test and conducted emissions

Description: Method: ISO 11452, ISO 7637-2

ILT-U-3382Radio disturbance and immunity measuring apparatus determination.


Conducted disturbance measurements 9 to 30000 kHz. Accoridng to ISO 55016-2-1

Standard :ISO 55016-2-1,

ILT-U-1558Rapid temperature change determination

Description: Thermal Shock – Na test Method: IEC 60068-2-14

ILT-U-2131Resistivity of Electrical Conductor Materials. EL

Description: Resistivity Method: ASTM B193

, ILT-U-3392Road vehicles determinations


Gravimetry, Light-optical analysis. According to ISO 16232

Standard :ISO 16232,

, , ILT-U-053RoHS2 determination

lead, cadmium, mercury, chromium and bromine by XRF spectroscopy ). RoHS2

ILT-U-1692Safety of electrical appliances

Description: Method:

ILT-U-3381Safety of machinery determiantion


All determinations. Electrical equipment of machines. Accoridng to IEC 60204-1

Standard :IEC 60204-1,

ILT-U-1592Safety requirements for electrical equipment for measurement, control, and laboratory use

Description: Volt-Amperometric clamp determinations Method: IEC 61010

ILT-U-386Safety requirements of audio, video and similar electronic apparatus

Description: All test Method: IEC 60065

ILT-U-791Salt mist determination

Description: Salt mist (96 H) Method: IEC 60068-2-11

ILT-U-553Self-ballasted compact fluorescent lamps for general lighting services

Description: Clause 5; 6; and 7 Method: IEC 60969

ILT-U-1972Self-ballasted fluorescent lamps for general lighting services

Description: All determinations Method: IEC 60968

ILT-U-1873Shock testing

Description: Level 1. Waveform: semi-sinusoidal; Maximum acceleration: 25 g.; Pulse duration: 6 ms; Number of repetitions per verse: 10; and Duration: 2 minutes Method: IEC 60068-2-27

ILT-U-2470Single phase meter determinations

All determinations. According to IEC 62052-11

ILT-U-2443Single phase motors determinations
Test resistance, Direct measurement of input and output, Rated load test, No-load test. According to IEC 60034-2-1
ILT-U-379Socket outlet test

Description: IEC 60884-1 Method: IEC 60884-1

ILT-U-1698Steam cleaners determinations

Description: steam cleaners Method: IEC 60335-2-79

ILT-U-1665Surge immunity test determinations

Description: Surge generator Method: IEC 61000-4-5

ILT-U-370Switch test

Description: IEC 60669-1 Method: IEC 60669-1

ILT-U-2406Switchboard determinations

According to IEC 61439-1

ILT-U-433Temperature rise determination

Temperature rise. According to IEC 60669-1, NTC 1337

ILT-U-059Tensile strength and elongation at break test of PVC cables

Description: IEC 60227-2 and IEC 60811-1-1, chapter 9 Method: IEC 60227-2, IEC 60811-1-1

ILT-U-181Tensile stress at break and elongation of semiconducting screens, insulation and protective covers electrical conductors

Description: IEC-60811-1-1-2001 clause 9 – IEC 60811-501-2012 Method: IEC 60811-1-1, IEC 60811-501

ILT-U-1970Terminal block determinations

Description: Clause 9.2 / 9.3 / 9.4 and 9.5 Method:

ILT-U-533Test luminaire photometry


Electrical Characteristics (at rated voltage), Efficacy (lumen/watt), and Photometric parameters. Accordign to IESNA LM-79

Standard :

ILT-U-183Test shrinkage (shrinkage)

Description: IEC 60811-1-3-2001 Clause 10 – IEC 60811-502-2012 Method: IEC 60811-1-3, IEC 60811-502

ILT-U-415Testing of earthing

Description: IEC 60950 Method: IEC 60950

ILT-U-038Thermal stability of PVC insulation or sheath of cables

Description: IEC 60811-3-2 Method: IEC 60811-3-2

ILT-U-1969Thermomagnetic key determinations

Description: Clause 9.4 / 9.5.1 and 9.5.3 Method: IEC 60898-1

ILT-U-182Thickness determination of electrical conductors covered

Description: IEC 60811-1-1-2001 Clause 8.2 – IEC 60811-202-2012 Method: IEC 60811-1-1, IEC 60811-202

ILT-U-2407Three-phase motor determinations

Protection against overload of transformers and associated circuits, Input power and current. According to IEC 60034-1, NTC 2805

ILT-U-2444Three-phase motors determinations

Test resistance, Summation of losses, additional load losses according to the method of residual loss. According to IEC 60034-1

ILT-U-844Torsion resistance determination in sodium vapor lamp

Description: Torsion resistance Method: IEC 62035

ILT-U-1973Torsion resistance in lamp-holder

Description: Torsion resistance. Clause Method: UL 496

ILT-U-1971Torsion resistance in Led lamp

Description: Torsion resistance of unused lamps (E27). Clause 9.1 (aging 200 hs.) Method: IEC 62560

ILT-U-199Tracking indices test

Description: Method for the determination of the proof and the comparative tracking indices (CTI) of solid insulating materials Method: IEC 60112, IEC 60695-10-2, GB/T 5169.21, GB/T 4207

ILT-S-02Tracking indices test and Ball pressure test

Description: IEC 60112 and IEC 60695-10.2 Method: IEC 60112, IEC 60695, GB/T 4207, GB/T 5169.21

ILT-U-2550Transformer determination

Heating transformers. aAccording to IEC 61558-1 Clause 14

ILT-U-1955Transportable tools determinations

Description: Protection against active parts, and Leakage current Method: IEC 62841-1

ILT-U-1169TV LCD Determinations

Description: Anex A – Measurement of visual diagonal; Anex C – Power Off “stand by”, according to Portaria INMETRO 085/09 Anex A – Measurement of visual diagonal; Anexo – Power “on”; Anex C – Power off “stand by”, according to Portaria INMETRO 427/14 Method:

ILT-U-1089TVs determinations

Description: Consumption measurement in “stand by”; and Measurement of visual angle. Method: Portaria 85:2009

ILT-U-1824USB Dedicated Charging Port Test

Description: DCP Overshoot and Undershoot Voltage Test; DCP Handshaking Test; DCP Resistance and Capacitance Tests; and DCP Voltage and Current Method: Battery Charging Specification revision 1.2, IEC 62680-1-1

ILT-U-1823USB Type-C Chargers. 1C

Description: Initial Voltage Test, and USB Type-C Current Adv Test Method: USB Type C Functional Test Specification, IEC 62680-1-3

ILT-U-1826USB Type-C Chargers. 1D

Description: Low level contact resistance, Dielectric strength, Insulation resistance, Resistance between contacts under high current conditions Method: IEC 62680-1-3

ILT-U-2471Vacuum Cleaner determinations

All determinations. According to IEC 60312-1

ILT-U-1696Vacuum cleaners determinations

Description: vacuum cleaners Method: IEC 60335-2-2

, ILT-U-3375Vehicle electric components determination.


Vehicle electric components (Pulse 1, Pulse 2a/2b, Pulse 3a/3b and Pulse 4). According to ISO 7637-1, ISO 7637-2

Standard :ISO 7637-1, , ISO 7637-2

ILT-U-2055Vehicle electric components determinations

Description: Direct Current Test; Overvoltage Test; Superimposed Alternating Voltage Test; Slow Decrease and Increase of Supply Voltage; Discontinuities in supply Voltage Test; Reversed voltage Test; Withstand Voltage Test; and Insulation Resistance Test Method: ISO 16750-1

ILT-U-1563Vibration determination

Description: Vibration (sinusoidal); 66 hs (22 for each cyle); 3 cycles Method: IEC 60068-2-6, ISO 16750-3

ILT-U-1872Vibration testing

Description: Level 1. Minimum frequency: 10 Hz.; o Frequency f1: 20 Hz Frequency f2: 1000 Hz; o Maximum frequency: 2000 Hz.; o RMS value: 3.35 g; o ASD form (flat between f1 and f2): 0.01 g2 / Hz; o Initial slope of 10 Hz: +6 dB / octave; Final slope between 1000 and 2000 Hz: -24 dB / octave; and Duration: 20 minutes Method: IEC 60068-2-64

ILT-U-1859Washing machines electrical determinations

Description: Performance of washing machines Method: IEC 60456, IEC 60335-2-7

, ILT-U-2886Water heater determination


Thermal efficiency. Storage water heater (LP Gas). According to NOM-003-ENER-2021 Clause 8.5

Standard :NOM-003-ENER-2021,

ILT-U-437Wattage measurements of electric appliances

Description: IEC 60335-2-14. Method: IEC 60335-1

ILT-U-2349Wire determinations

Acidity (by pH) and conductivity

ILT-U-1599Wire determinations – Mechanical properties of insulation and sheathing compounds

Description: Test for determining the mechanical properties of insulation and sheathing compounds Method: IEC 60811-501

ILT-U-1609Wire determinations – Resistance of conductor

Description: Resistance of conductor Method: IEC 60227

ILT-U-1597Wire determinations – Thermal stability test for PVC insulations and PVC sheaths

Description: Thermal stability test for PVC insulations and PVC sheaths Method: IEC 60811-405

ILT-U-1474Wire determinations. 1A

Description: Insulation thickness; Thickness of non-metallic sheath (insulation covered and electrical conductors); Overall dimensions; Insulation resistance; Water absorption test – electrical method; Loss of mass test; Thermal ageing of insulation and sheath; Heat shrinking of insulation and sheath; and Thermal shock test on insulation and sheath Method: EN 60811-509, EN 60811-502, EN 60811-401, EN 60811-402, EN 60811-409, EN 60811-203, EN 60811-201, EN 60811-202, CEI 60502

ILT-U-1596Wire determinations. 1B

Description: Conductor resistance; Insulation thickness; Outside cable diameter; Conductor diameter; Strip force; Abrasión test; Resistance to fíame propagation; Insulation volume resistivity; Withstand voltage; Shrinkage by heat; Pressure test at high temperature; Thermal overload; Short term heat ageing 240 h; Long term heat ageing 3 000 h; Low temperature winding; Cold impact; Durability of cable marking; Resistance to hot water; Resistance to liquid chemicals; Test Method 2 — Resistance to liquid chemicals Fluid compatibility; and Temperature and humidity Method: ISO 6722

ILT-U-1601Wire determinations. 1C

Description: Sliding behavior of the cable; Bending force of the cable; Insulation notch strength; Stress test; Thermal stability in the wound state; Ciclic bending; Kink test; Damp heat, constant (hydrolysis test); and Resistance to chemicals and wrapping tapes Method: LV 112-1, VW 60306-1, ISO 14572

ILT-U-456Wires determination.


Determination of the cross-sectional area of electrical conductors by the mass (weight), Determination of thickness of insulation and covers of electrical conductors, Determination of electrical resistance to direct current, Dielectric strength or voltage applied to insulation, Insulation resistance, Insulation and jacket physical properties before and after aging in air. According to UL 2556 / NTC 5786 Clause 3.2, 3.4, 4.1, 4.2, 6.2, 6.4

Standard :

ILT – Interlaboratory Test
Scroll to Top
  • No products in the cart.